VideoStudio :: Data Buffer Underrun
Dec 27, 2006
I've burned like 9 DVDs without issue using ulead. I'm now burning another, but have wasted 4 DVDs since I am getting a dialog, right near the end of the actual burn for:
"Data buffer underrun. The computer may be too busy with other tasks or may not have enough power to keep the specified burning speed. [534:-2147216284:0]"
All movies are about the same length (120m) and all settings are the same. My computer is a 4.6Ghz dual core AMD with 2G RAM. I'm writing to a HD with 200G free; local disk has 120G free. No other apps open.
This is the first time I've received this error; I've totally recreated a vsp project and everything, but I still get this error. I've modified so that the burn is only at 4x, which is shows is the minimum? The option to enable buffer underrun is disabled and I can't select it. I'm doing a two-pass conversion just like all my other successful burns.
View 7 Replies
ADVERTISEMENT
May 3, 2012
I am familiar with GIS but I am new to AutoCAD Map 2012.
I have 140,000 lines and 20,000 points.
I would like to have all points closer than 1 meter to a line.
This is what I tried to do:
buffer the lines (_mapfdobuffercreate)overlay points and buffer (_MapGisOverLay) to get all points in the buffer area
This works well with a small amount of data.But in step 1 I have to select all lines (140,000) with the mouse. When I try to select all lines with the mouse AutoCAD Map freezes after some minutes. Is there a way with AutoCAD to work on a “layer basis” and not on a “selection set basis”. Other GIS (ESRI, Quantum, …) work with a complete layer.
In this analysis I work with FDO Data (shp,sqlite,sdf). I have geometries, but no attribute data.
View 3 Replies
View Related
Sep 23, 2011
I tried the cocut software and it worked for about 3 days, now I get the Data in Buffer message on the screen and it does not print. The motors fire up when I try, but it does not cut. XP or Windows &, no difference.
View 2 Replies
View Related
Jan 13, 2008
"An internal error occurred when overlapped buffer is full."
That is the message I am receiving when I try to make my project into a video or audio file.
I have two audio tracks which have only two effects added to them.
What is wrong?
View 9 Replies
View Related
Mar 1, 2011
Is there a way to prevent the render window from clearing to black before rendering a new frame when using the scanline renderer? Several versions ago Max used to leave the old image up while updating and its easier for me in some cases to see changes when the previous frame is still there and updates as the scanline renders down the frame.
View 6 Replies
View Related
Apr 9, 2013
I would like AMAP to perform a BUFFER operation on a certain SHP, so the resulting buffer polygons would get the table attributes from that original shape, and also be exported as a SHP.
It is mandatory that a buffer polygon will have the same attributes from the original SHP line, including its FeatID.
Is it possible?
View 2 Replies
View Related
Nov 28, 2012
I'm a beginner of 3ds max. I have trouble with getting alpha image from Vray frame buffer.
My scene is very simple
-2 Objects with Vray standard material
-Vray plane
-Vray dome light
Even when I render as Tiff data, I can not see alpha image. It is all white. How to get alpha image. And also is there anything else good way to get alpha image by the each object(without using matt/shadow material)? I used 'VrayWireColor' from 'Render Elements' but the image edge has slightly white frindge...
View 8 Replies
View Related
Jan 28, 2011
I am trying to create a 150m buffer around points from a map features that I have attached from an SDF.
If I select any amount of points to buffer I get the following error:Unable to complete buffer operation
Using Civil 3D 2011 (come with Map 3D of course) 64 bit on a window 64 bit machine. Tried attaching sqlite db with no luck, then exported to SDF attached to dwg as datasource, themed, etc... tried feature buffer analysis again... same error.
View 8 Replies
View Related
Feb 21, 2013
I'm taking over some code from a developer that is no longer here. Right now when the code saved a resultbuffer object to xdata, I get an eregappidnotfound. Due to various forums, I believe this is because the ID is not being registered with the database before it's being inserted.
The error is thrown on this line: XData.ToXData(partCollection);
using (Autodesk.AutoCAD.DatabaseServices.DBObject dbObj = t.GetObject(objId, Autodesk.AutoCAD.DatabaseServices.OpenMode.ForWrite)){ DeviceName.SetDeviceName((Autodesk.AutoCAD.DatabaseServices.BlockReference)dbObj, txtDeviceName.Text);
dbObj.XData = XData.ToXData(partCollection); t.Commit();}
The code for the ToXData function is here:
public static ResultBuffer ToXData(PartCollection Parts) { //Write out some header information ResultBuffer rb = new ResultBuffer(new TypedValue(System.Convert.ToInt32(DxfCode.ExtendedDataRegAppName), XDATA_APP_NAME), new TypedValue(System.Convert.ToInt32(DxfCode.ExtendedDataInteger16), XDATA_TYPE), new [code].......
View 2 Replies
View Related
Oct 4, 2011
How to render different channels with custom framebuffer. But in order to get it working there has some node need to add into the render tree.
View 1 Replies
View Related
Sep 26, 2011
I`m not sure if this is possible or not.
Is there any way to write a script which copy`s a variable to the buffer? Similar to CTRL-C?
View 9 Replies
View Related
May 3, 2013
So you know when a video buffers, it is typically a round path with circles or lines and such that go from dark to light? Well, I need something like that for a logo design. I am trying to create a custom art brush, but its not happening. I created the shape Id like for all of the things to be along the path, but I don;t know which method of creating a brush to use.
Also, how to make each part around the circle get lighter?
View 5 Replies
View Related
Jun 26, 2013
I work a lot for companies doing big media installations (auto motor shows for example) where we have huge resolutions, which often exceed the maximum comp size of 30.000px in width.
Is this limitation still there in CC? And if so, why can't it be set higher? With LED technology getting better the resolutions are skyrocketing (I already worked on 3mm pixel pitch LED panels)
Also something that goes in conjunction with this: Mask Feather size, which is limited to 1000px in AE CS6 and lower. Any change there in CC?If this limitations would be removed, it would be a good argument for CC.
View 8 Replies
View Related
May 20, 2011
Up until recently I have been continuing to use VS9 for creating DVDs but I use X2 for editing and rendering video files. I have now created templates in X2 but the video files that are displayed at the bottom of the 1st DVD menu has now twice disappeared relating to 2 DVDs (so 4 times).
The VSP files are 2.0MB and 2.5MB so the data seems to be there but are empty when calling up the DVD menu. My video files are in an external file but that has never been a problem with VS9 and I can't see that being the problem.
All works fine on the day I create them and I can sut down and reopen VS without trouble. When I log on another day all the data is gone. I have wasted many hours and am at the end of my tether.
View 4 Replies
View Related
Oct 24, 2012
I'm relatively new at video editing so VS Pro5 has been my first venture into this world. I use a rendering program called Lumion to generate video from the architectural models I create at full 1080p. The problem that I seem to be having is that Corel doesn't support the data rate that the Lumion videos tend to be. My current walkthrough is a 1080p mp4 video and windows tells me its data rate is 42435 kbps. When I import into VS pro5 it tells me the same video is 42180 kbps. When I try to export the clip the program always reduces the data rate to a level that ruins the visual fidelity of the clip. I have tried the custom export and the program won't let me enter higher than 20000 kbps and when I tried the method of using the first clip settings it still reduces the clip down to 36510 kbps which is better but still not the original data rate. Is there something I'm missing or VS Pro5 have data rate limits?
Is 42435 kbps a ridiculous amount for data rate for 1920 x 1080 30f/s video? I don't know a thing on data rates but I'm assuming it's why I'm losing quality in my final video. The 42435kbps clip runs fine on my machine but what should rate should I be considering for my clients to use?
View 9 Replies
View Related
Jan 13, 2013
I have been using VS for over 12 years to produce DVD videos. I have used many versions and am now currently using VS Pro X4. When I when I render a VSP to a DVD I always render to an ISO file and then use that ISO file to burn DVDs. I have always noticed a data size discrepancy between what VS predicts the final data size of the DVD will be and actually what it turns out to be. In most earlier versions of VS this size discrepancy has always been small (maybe a few hundred megabytes), but in X4 it is huge, as much as 2 Gigabytes for a full length DVD. The problem I am having is that I know that a two hour DVD quality video will fit on a single layer 4.7 GB DVD disc, but VS is projecting it to be 7 GB. Now in former versions of VS I could go ahead and render the project to an ISO file knowing that the final product would fit on a 4.7 DVD. But X4 will not allow me to do that. When I try to do this in X4, it comes up and says that the project is too large to fit on a 4.7 and to click OK to use DVD FIT or click cancel to go back and edit the video. If I click on OK, then VS reduces the quality of the video to fit a 4.7 DVD. The problem is that the final product turns out being around 3 GB. This means I have lost about 1.5 GB in video quality.
View 2 Replies
View Related
Mar 20, 2013
I have been trying to transfer MP4 videos into VSPX5U from an ELGATO game capture card. Every video captured by the capture card is in an MP4 format and when trying to transfer it, my VSPX5U will tells me that "The file cointains no video data".
I understand that the Service Patch is supposed to fix this but after the initial download, it will tell me that "The installed version of the application could not be determined. The setup will now terminate"
View 1 Replies
View Related
Dec 8, 2013
I have 960*544 mp4 video
data rate 1800 kbs
29.970 fps
I want to cut a portion of it and put the same data rate but the quality was not good
View 14 Replies
View Related
May 26, 2011
VS9 enables users to virtually split clips by scene before adding them to the work space. It does not split the actual file but just keeps pointers to the various scenes. VS9 keeps this data in a file named scenedb.dat. However if the clip is moved to a different location then the scene information is not re-linked and is essentially lost (as far as VS is concerned) although the data is still in the scenedb.dat.
Is there any way to go around this problem and recover the scene info after a clip is moved?
That is, besides not moving the clips to a different folder than the one it was in when the scene data was first generated and/or re-generating the scen information?
I tried simple editing of the file path in the .dat file but this does not seem to work. It would be nice to understand the encoding rule for the scenedb.dat file to 1) update it 2) use it to generate some index db outside of VS (e.g. html page).
View 2 Replies
View Related
Jun 1, 2013
I am working on parsing the psd file and saving the data as per doc of photoshop 6. I need to make an image from the layer data alone with different combinations of layers selected, visible etc... and not using the merged data section in the file.
View 1 Replies
View Related
Apr 24, 2012
I have a master shape file that contains parcel ID, owner, tax info., etc. I have another file ( access 2003 -open to better file format suggestions-) which contains parcel ID and a "yes" or " no" entry for whether or not the parcel needs a new water meter. All I want to do is add the water meter information into the other shape file. This would create one shape file with one table with all the information that I need.
Ultimately I will use the information to do a map query and find out spatially where i need new water meters.
Right now i have the master shape file connected though the “Connect to Data” feature. I also have the new data added to the drawing though the Data sources------>attach under the “Map Explorer” Task pane. I attached access file (ver. 2003 .mdb) which has two columns “Parcel ID” and “Meter”.
I right click on the shape file under the display manager and select”Create a Join;” however my water meter table is not listed as an option. Will this not work?
Plan B - I tried to Create and connect to the access file as an ODBC connection. Followed this guy’s directions to a T [URL]. But when i populate my table under the fdo connection the column headings exist ( “parcel ID” and “Meter”) but the actual data is missing. Am I missing something important?
Note: I am running c3d 2012 on a Win 7 64 Bit machine. I also removed office 32 bit apps and installed 64 bit apps to see if that would solve the problem. No go.
View 3 Replies
View Related
Apr 10, 2013
say you make some parcels in your project with custom data fields like: id_no, permit_no, acres_served etc. you attach an agency provided shape file via an fdo connection that has many fields of information like above.
when you right click on your parcel and do parcel properties you get a tab that lets you input the custom parcel data.
lets say you print an fdo map label showing, say, the id_no, provided in the shape file. Then in your custom parcel properties for id_no you type that in.
is there a way to make an expression to put in the other custom parcel properties that will read, say, the permit_no(id_no) from the fdo like and put that information in the custom parcel property field?
View 4 Replies
View Related
Jun 7, 2012
I'm having problems getting super elevation data to transfer to different drawings by means of an alignment data shortcut. I know alignments hold the super elevation data so I've gone into my alignments data shortcut, input my super elevation data, saved and closed. Now when I open my finished grade drawing, reference in my alignment and profiles, then create a corridor from that information, my super elevation didn't transfer with the reference.
I pulled cross sections and it appears is has no clue there is any super elevation data. Also, I tried bringing it directly into the drawing I'm doing my corridors in and it erred saying I must be in the parent alignment drawing. Data shortcuts are pretty much useless to me if super elevation data doesn't transfer.
64 bit Windows 7
Intel Xeon (R) @2.8GHz
6.00GB Ram
Civil 3D 2012
Civil 3D 2012
Intel(R) Xeon W3530 @ 2.80GHz
6.00GB Ram
Windows 7 Professional
View 2 Replies
View Related
Apr 19, 2012
I am trying to link my extracted data from blocks with attributes to an extenal source so that the table I create and place into the drawing already has the formulas I need to due the required calculations. But every time I create and place the table the formulas are not in the table. I include the columes that contain the data but it doesn't seem to be working.
View 2 Replies
View Related
Mar 1, 2014
Without using scripts, is there any way to have rectangles or textboxes act on values coming from a data file? For examplle if the value in a textbox was greater than 10 coming from a data record, could the textbox change color, or any other attribute to make it change from record to recortd as it is being viewed or printed?
View 9 Replies
View Related
Sep 9, 2011
i have created a data band in profile view that should show a created profiles elevation, but some of the the data fields are missing irregulary. Also in the data band that shoud show the diferenece betven the tow profiles - EG and the new profile the data is missing. The EG profiles data and the surface are ok all is shown.
View 4 Replies
View Related
May 3, 2013
I've just installed Civil3D, 64-bit on windows 7(running on bootcamp) and am trying to insert a georeferenced raster image but have encountered some issues.
1. "Home tab>>Data panel>>>insert An Image" - The data panel is missing and it's also not found in "customize palettes"
2. Trying the data connect route does not work either: Display manager>>>Data>>>Connect To Data - There is no 'Data' option and I cannot connect to Data.
View 1 Replies
View Related
Oct 24, 2013
Is it possible to embedd data in a table so that a user can select from a group of data within one cell?
I use this technique quite often in Excel. One cell in a table can have various values: A, B, C, or D. While another cell can have a different set of values to choose from: BLUE, RED, ORANGE, or PURPLE. The user can pull down an arrow (similar to a dynamic block) and choose from a set list of values.
View 2 Replies
View Related
Oct 12, 2011
I know that the xmls are very important in the design data folder and we shouldn't mess with them.What about the rest of the folders. I have around 11 folders. GOST, AEC Exchange, AIT, Cable & Harness, Bend Tables, DWG-DXF etc...
I need to know if any of these folders can be deleted? We don't use AEC Exchange, Cable Harness, BIm Exchange, Design Accelerator, Tube & Pipe.
What about the Optimisation, DXF-DWG. I am not sure if I am using them unknowingly.Does this could be deleted? Is there a procedure to get rid of them.
View 1 Replies
View Related
Jan 20, 2011
how to import point data that has Map Object Data also attached to it? "import it by attaching to a data source".
Example: I have a bunch of manholes. Each MH has X,Y,Z, but also Type, Invert Elevs., Pipe Sizes, Pipe Materials, Pipe Directions, Structure Type/Material, etc. etc. etc. I may have point data representing MH's, airport runway ends, trees, anything you can imagine, with all kinds of data imaginable.
I want to import this data directly into Autocad/Civil 3D as either Autocad points, lines, or closed polylines (I also have utility lines, parking lots, etc.- all with data associated with it), all with the data attached as object data. I know that anything more complex than points might be hard to explain here, so I am hoping at least for a solution on how to import points - I have 99,999 MH's and obviously I don't want to have to type all that data in one by one.
I basically suck at using sql server. I can get around using the Map workspace and the different tabs. I have never used FDO, and I am not even sure what it is.
I fooled it today by creating 99,999 Autocad points at the correct XYZ, attaching the correct object data to them, then exporting as a shp file. I went into the shp_name.dbf file and edited it to add the data I wanted by cutting & pasting from Excel. then I re-imported the shp file. but, this is a workaround at best.
Surely Map can import objects and their associated data fields, all populated with valid data! all I need is to know how to do it. I mean, if this is not something I can do directly using Map commands should I take the money I earned by surveying 99,999 MH's with my GIS data collector that allows me to assign 101data fields to each object I survey, and buy something better?
C3D 2012 on 64bit Win 7 all up to date
Dell Precision 7core 8GB RAM
NVIDIA Quadro FX 1800M
LDT/C3D user since release 12
View 9 Replies
View Related
Jan 20, 2012
Is it possible to add data to a feature data table? Example: The shape file data downloaded from NRCS only has the Soil number for the State. As I check out features I would like to add data for the soil name, soil group, etc. as additional columns in the data table and have it available in the future by checking the feature back in to my local information.
View 2 Replies
View Related
