I am familiar with GIS but I am new to AutoCAD Map 2012.
I have 140,000 lines and 20,000 points.
I would like to have all points closer than 1 meter to a line.
This is what I tried to do:
buffer the lines (_mapfdobuffercreate)overlay points and buffer (_MapGisOverLay) to get all points in the buffer area
This works well with a small amount of data.But in step 1 I have to select all lines (140,000) with the mouse. When I try to select all lines with the mouse AutoCAD Map freezes after some minutes. Is there a way with AutoCAD to work on a “layer basis” and not on a “selection set basis”. Other GIS (ESRI, Quantum, …) work with a complete layer.
In this analysis I work with FDO Data (shp,sqlite,sdf). I have geometries, but no attribute data.
I've burned like 9 DVDs without issue using ulead. I'm now burning another, but have wasted 4 DVDs since I am getting a dialog, right near the end of the actual burn for:
"Data buffer underrun. The computer may be too busy with other tasks or may not have enough power to keep the specified burning speed. [534:-2147216284:0]"
All movies are about the same length (120m) and all settings are the same. My computer is a 4.6Ghz dual core AMD with 2G RAM. I'm writing to a HD with 200G free; local disk has 120G free. No other apps open.
This is the first time I've received this error; I've totally recreated a vsp project and everything, but I still get this error. I've modified so that the burn is only at 4x, which is shows is the minimum? The option to enable buffer underrun is disabled and I can't select it. I'm doing a two-pass conversion just like all my other successful burns.
I tried the cocut software and it worked for about 3 days, now I get the Data in Buffer message on the screen and it does not print. The motors fire up when I try, but it does not cut. XP or Windows &, no difference.
I'm currently working on building up a library of 3D models of crane rigging for a new job. Specifically, I'm creating wire rope slings (like this 3/8" wire rope sling) but with less of an emphasis on visual detail and more on precise measurements.
In order to simplify the process a bit, I created an excel file to enter the basic four measurements of a sling (length, rope thickness, eye width, and eye length) which then calculates and displays for me the coordinates and measurements of all the objects needed to make the sling (arcs, lines, circles to sweep along those lines, etc.)
I realize now that I'm really just creating a task of endless copy/paste, and I'm looking for a better way to get through the process. How to make this work as efficiently as possible.
Is there some way that I could point AutoCAD to the Excel file and have it read all the coordinates and measurements to draw everything automatically? I also considered creating a line in Excel that would give output that I could copy and paste into a .scr, but I have never used any scripting in CAD before, so it would be new territory for me.
I would like AMAP to perform a BUFFER operation on a certain SHP, so the resulting buffer polygons would get the table attributes from that original shape, and also be exported as a SHP.
It is mandatory that a buffer polygon will have the same attributes from the original SHP line, including its FeatID.
I am trying to create a 150m buffer around points from a map features that I have attached from an SDF.
If I select any amount of points to buffer I get the following error:Unable to complete buffer operation
Using Civil 3D 2011 (come with Map 3D of course) 64 bit on a window 64 bit machine. Tried attaching sqlite db with no luck, then exported to SDF attached to dwg as datasource, themed, etc... tried feature buffer analysis again... same error.
I'm taking over some code from a developer that is no longer here. Right now when the code saved a resultbuffer object to xdata, I get an eregappidnotfound. Due to various forums, I believe this is because the ID is not being registered with the database before it's being inserted.
The error is thrown on this line: XData.ToXData(partCollection);
public static ResultBuffer ToXData(PartCollection Parts) { //Write out some header information ResultBuffer rb = new ResultBuffer(new TypedValue(System.Convert.ToInt32(DxfCode.ExtendedDataRegAppName), XDATA_APP_NAME), new TypedValue(System.Convert.ToInt32(DxfCode.ExtendedDataInteger16), XDATA_TYPE), new [code].......
Is there a way to prevent the render window from clearing to black before rendering a new frame when using the scanline renderer? Several versions ago Max used to leave the old image up while updating and its easier for me in some cases to see changes when the previous frame is still there and updates as the scanline renders down the frame.
I'm a beginner of 3ds max. I have trouble with getting alpha image from Vray frame buffer.
My scene is very simple -2 Objects with Vray standard material -Vray plane -Vray dome light
Even when I render as Tiff data, I can not see alpha image. It is all white. How to get alpha image. And also is there anything else good way to get alpha image by the each object(without using matt/shadow material)? I used 'VrayWireColor' from 'Render Elements' but the image edge has slightly white frindge...
So you know when a video buffers, it is typically a round path with circles or lines and such that go from dark to light? Well, I need something like that for a logo design. I am trying to create a custom art brush, but its not happening. I created the shape Id like for all of the things to be along the path, but I don;t know which method of creating a brush to use.
Also, how to make each part around the circle get lighter?
I work a lot for companies doing big media installations (auto motor shows for example) where we have huge resolutions, which often exceed the maximum comp size of 30.000px in width.
Is this limitation still there in CC? And if so, why can't it be set higher? With LED technology getting better the resolutions are skyrocketing (I already worked on 3mm pixel pitch LED panels)
Also something that goes in conjunction with this: Mask Feather size, which is limited to 1000px in AE CS6 and lower. Any change there in CC?If this limitations would be removed, it would be a good argument for CC.
I am looking to create a collage made from 100 photos (all taken high res) to be printed large, approx 120cm x 50cm. To be able to print this size I need to keep the high resolution and hence looking for a large file output.
I have a master shape file that contains parcel ID, owner, tax info., etc. I have another file ( access 2003 -open to better file format suggestions-) which contains parcel ID and a "yes" or " no" entry for whether or not the parcel needs a new water meter. All I want to do is add the water meter information into the other shape file. This would create one shape file with one table with all the information that I need.
Ultimately I will use the information to do a map query and find out spatially where i need new water meters.
Right now i have the master shape file connected though the “Connect to Data” feature. I also have the new data added to the drawing though the Data sources------>attach under the “Map Explorer” Task pane. I attached access file (ver. 2003 .mdb) which has two columns “Parcel ID” and “Meter”.
I right click on the shape file under the display manager and select”Create a Join;” however my water meter table is not listed as an option. Will this not work?
Plan B - I tried to Create and connect to the access file as an ODBC connection. Followed this guy’s directions to a T [URL]. But when i populate my table under the fdo connection the column headings exist ( “parcel ID” and “Meter”) but the actual data is missing. Am I missing something important?
Note: I am running c3d 2012 on a Win 7 64 Bit machine. I also removed office 32 bit apps and installed 64 bit apps to see if that would solve the problem. No go.
say you make some parcels in your project with custom data fields like: id_no, permit_no, acres_served etc. you attach an agency provided shape file via an fdo connection that has many fields of information like above.
when you right click on your parcel and do parcel properties you get a tab that lets you input the custom parcel data.
lets say you print an fdo map label showing, say, the id_no, provided in the shape file. Then in your custom parcel properties for id_no you type that in.
is there a way to make an expression to put in the other custom parcel properties that will read, say, the permit_no(id_no) from the fdo like and put that information in the custom parcel property field?
I'm having problems getting super elevation data to transfer to different drawings by means of an alignment data shortcut. I know alignments hold the super elevation data so I've gone into my alignments data shortcut, input my super elevation data, saved and closed. Now when I open my finished grade drawing, reference in my alignment and profiles, then create a corridor from that information, my super elevation didn't transfer with the reference.
I pulled cross sections and it appears is has no clue there is any super elevation data. Also, I tried bringing it directly into the drawing I'm doing my corridors in and it erred saying I must be in the parent alignment drawing. Data shortcuts are pretty much useless to me if super elevation data doesn't transfer.
64 bit Windows 7 Intel Xeon (R) @2.8GHz 6.00GB Ram Civil 3D 2012 Civil 3D 2012 Intel(R) Xeon W3530 @ 2.80GHz 6.00GB Ram Windows 7 Professional
I am trying to link my extracted data from blocks with attributes to an extenal source so that the table I create and place into the drawing already has the formulas I need to due the required calculations. But every time I create and place the table the formulas are not in the table. I include the columes that contain the data but it doesn't seem to be working.
i have created a data band in profile view that should show a created profiles elevation, but some of the the data fields are missing irregulary. Also in the data band that shoud show the diferenece betven the tow profiles - EG and the new profile the data is missing. The EG profiles data and the surface are ok all is shown.
I've just installed Civil3D, 64-bit on windows 7(running on bootcamp) and am trying to insert a georeferenced raster image but have encountered some issues.
1. "Home tab>>Data panel>>>insert An Image" - The data panel is missing and it's also not found in "customize palettes"
2. Trying the data connect route does not work either: Display manager>>>Data>>>Connect To Data - There is no 'Data' option and I cannot connect to Data.
Is it possible to embedd data in a table so that a user can select from a group of data within one cell?
I use this technique quite often in Excel. One cell in a table can have various values: A, B, C, or D. While another cell can have a different set of values to choose from: BLUE, RED, ORANGE, or PURPLE. The user can pull down an arrow (similar to a dynamic block) and choose from a set list of values.
I know that the xmls are very important in the design data folder and we shouldn't mess with them.What about the rest of the folders. I have around 11 folders. GOST, AEC Exchange, AIT, Cable & Harness, Bend Tables, DWG-DXF etc...
I need to know if any of these folders can be deleted? We don't use AEC Exchange, Cable Harness, BIm Exchange, Design Accelerator, Tube & Pipe.
What about the Optimisation, DXF-DWG. I am not sure if I am using them unknowingly.Does this could be deleted? Is there a procedure to get rid of them.
how to import point data that has Map Object Data also attached to it? "import it by attaching to a data source".
Example: I have a bunch of manholes. Each MH has X,Y,Z, but also Type, Invert Elevs., Pipe Sizes, Pipe Materials, Pipe Directions, Structure Type/Material, etc. etc. etc. I may have point data representing MH's, airport runway ends, trees, anything you can imagine, with all kinds of data imaginable.
I want to import this data directly into Autocad/Civil 3D as either Autocad points, lines, or closed polylines (I also have utility lines, parking lots, etc.- all with data associated with it), all with the data attached as object data. I know that anything more complex than points might be hard to explain here, so I am hoping at least for a solution on how to import points - I have 99,999 MH's and obviously I don't want to have to type all that data in one by one.
I basically suck at using sql server. I can get around using the Map workspace and the different tabs. I have never used FDO, and I am not even sure what it is.
I fooled it today by creating 99,999 Autocad points at the correct XYZ, attaching the correct object data to them, then exporting as a shp file. I went into the shp_name.dbf file and edited it to add the data I wanted by cutting & pasting from Excel. then I re-imported the shp file. but, this is a workaround at best.
Surely Map can import objects and their associated data fields, all populated with valid data! all I need is to know how to do it. I mean, if this is not something I can do directly using Map commands should I take the money I earned by surveying 99,999 MH's with my GIS data collector that allows me to assign 101data fields to each object I survey, and buy something better?
C3D 2012 on 64bit Win 7 all up to date Dell Precision 7core 8GB RAM NVIDIA Quadro FX 1800M LDT/C3D user since release 12
Is it possible to add data to a feature data table? Example: The shape file data downloaded from NRCS only has the Soil number for the State. As I check out features I would like to add data for the soil name, soil group, etc. as additional columns in the data table and have it available in the future by checking the feature back in to my local information.
I have a drawing with Objects that have both Object Data and Linked data in an Access database. I need to get information from the linked table to a new linked table for each object.
I have thought that if I get the necessary information from the Linked table record to the object data for each object, I could then convert the Object data to a new link and am looking for a way to copy the data from a field in the Linked Table to the object data. There is at least one field common to both the OD and Linked Table record.
In my company, they have just upgraded the old version of Autocad LT 2004 to the new 2013 and we have created menu to make our job easy. I have try to transfer the menu file .mnc to 2013 but it's not working or I don't do it the right way.
I'm working in AutoCAD Map 3D 2008 and Autocad Civil 3D 2009.
The General Task:I want to convert the object data to attribute data so that I can export it to an Excel file, add another column of data, and then import that new data as attribute data.
The Specific Task:I have thousands of campus water meter locations (a block with a small icon, attribute data, and object data) that belong to two different systems, domestic water and lake water. Each of these blocks has object data item (a barcode tag) that I want to show as a label next to the block.
However, before I do that, I want to export that barcode data to an excel file so I add a column (eventually a new piece of attribute data) that says whether or not that specific water meter is radio read or manually read. I want to then import that radio read/manual read excel file back into autocad and have an X appear on the block icon if it is radio read. I also want the barcode information to show up as a label.
My problem:I can't get the barcode object data to export with the locations in one easy excel sheet that I can simply import after I have made my changes.
Find some person on here who knows how to convert object data to attribute data.
I have a table setup in Autocad map and am entering attribute data for the objects (Polygons). I have received a new dataset which I imported as points into the drawings which sit inside in the polygons. The points imported include one attribute data field that I want to get into my table.
In practical terms I am entering data re building heights, received a lidar file with point data relating to the building height.
I am working on parsing the psd file and saving the data as per doc of photoshop 6. I need to make an image from the layer data alone with different combinations of layers selected, visible etc... and not using the merged data section in the file.
Without using scripts, is there any way to have rectangles or textboxes act on values coming from a data file? For examplle if the value in a textbox was greater than 10 coming from a data record, could the textbox change color, or any other attribute to make it change from record to recortd as it is being viewed or printed?
