VideoStudio :: Camera Roll Folder Crashes X5?
Sep 1, 2013
Just accessing the "camera roll" folder crashes VS X5. I have to copy every video I want to edit from that folder to somewhere else in order to edit them. FLAT OUT LOCKS UP AND CRASHES if I access the Camera Roll folder in VS X5 in Windows 8.1.
Crossfade is extremely buggy, it leaves pops and sometimes even cuts out the sound completely if one is using a crossfade on a video that has the sound already on it. I usually end up having to record the output of the audio from VS X5 through "stereo mix" with Audacity, save it as a wav, and then mix it into the video again later while muting the original video.
Crossfades are extremely glitchy in general when using AVCHD, the only high quality format that doesn't degrade the sound to oblivion.
Saving as an HD MP4 results in such bad sound degradation that it's almost not usable if it contains music, everything above 12k is pretty much completely hosed.
Thumbnails will randomly unlink themselves, and when you try to re-link them, even though they're there, it doesn't know how to get the name, so you either have to type it in again or select it from the list.
Are these things fixed in X6?
View 3 Replies
ADVERTISEMENT
Nov 6, 2013
I have elements 12 and a new iphone. It seems that all of camera pictures from my phone have automatically been included into my elements library without plugging it into itunes. What process is doing this? Is revel syncing the camera roll with elements and how can I disable it?
View 1 Replies
View Related
Aug 16, 2012
I'm using CS 5.5 with Camera Raw 6.7 on Windows XP. Suddenly, I'm having challenges with images opened and edited in Camera Raw 6.7, with either trying to save directly to disk or opening in Photoshop. I am getting "out of memory" errors. I've purged the caches, etc., but to no avail.
View 5 Replies
View Related
Jan 28, 2012
Luckily it still hasn't happened when the save as dialog box is open, but it's rather annoying when searching for a file in the open dialog box and the search takes more than 30 seconds. Crash. Also, it seems it only happens about 90% of the time. I've updated everything + drivers are good. (I use Windows 7 Home Premium on a Asus N53SN with 16gb RAM.)
View 1 Replies
View Related
May 25, 2012
I'm using LR 2.6 on a Mac running 10.7.4 (Lion).
The program keeps crashing/closing ( not freezing in screen) when I try to change the destination folder when importing.
i've not encountered tis problem before. It's just appeared since my upgrade to Lion.
It occurs regardless of the camera being used (or import from external HD). If I import to the currently selected folder everything works fine. And all editing functionality seems normal when working with images currenly in my LR library.
The crash occurs when selecting the destination folder and hitting "choose". That is to say it's before hitting the final "import button", and is definitely triggered by choosing the alternate folder.
View 4 Replies
View Related
Jul 20, 2013
I have a Fujifilm HS20EXR folder which contains video.Each time I select the folder, LR5 (Mac ML) crashes.
View 3 Replies
View Related
Apr 11, 2013
I can't see any difference in the import dialog when this preference checked or not checked ... where should I look for the effect of this preference?
View 13 Replies
View Related
Dec 15, 2012
I have used PS CS 5 and 6 for a couple of years and never had a crash until I downloaded the current Camera Raw update. Now it crashes in the middle of every edit session. Can I remove the update, or is there some other fix?
View 5 Replies
View Related
Mar 4, 2013
I import photos direct from camera (5DII) into Lightroom 4.3 the folder automatically created in Lightroom is one day out from the date photo created. Camera, computer and metadata info of file all have correct date. Windows 8 OS.
View 8 Replies
View Related
Jan 20, 2013
I have numerous subfolders that contain "Thumbs.db folders or are empty;" can I safely delete them?
View 2 Replies
View Related
Mar 21, 2014
Using LR v5.3 and Windows 8.1
For my particular workflow, I find that loading thumbnails as step 1 of the import process to not be of much value for me.
I would prefer to load all images from the camera CF card directly into my "Import" folder in Lightroom without having to first view and select images for import.
Step 2 for me would then distribute the images into other named folders in LR prior to the development, skipping the thumbnail phase of the process.
So, the Q: Is there any setting that allows importation into a selected folder in LR without first going through the thumbnail process?
View 4 Replies
View Related
Jul 11, 2013
There is "Ignore camera generated folder names when naming folders" on preferences tab, but I couldn't find a usage for this option. With a camera card including different folders, I can not see the folder names in my card on the import panel.
View 1 Replies
View Related
Oct 18, 2011
Once you have created your project, chapters and menus and just before you click "burn" to make your disc, click on disc info (it is an icon of a disc with an i on it. There you will find it is not information about the disc but actually more options. My favorite is the ability to add unrelated files to the burn by checking personal folder.
Here you can add a folder to your final disc burn. With this I am able to add raw photo's/vids or whatever so I don't have to burn two discs, one of the edited project and one of the raw data - sort of a Out Takes / Deleted Scenes folder (i.e. Easter egg).
View 2 Replies
View Related
Oct 5, 2010
Sometimes (only every now and then), when I try to render a project to AVI VS instantly crashes. Lets say I have three projects, project1, project2 and project3. Project1 & 3 will render to AVI just fine, every time. Project2 will crash every time I try to render to AVI. I can render any of the projects to MPG, MP4, WMV, whatever else I want. If I recreate project2 from scratch as Project4, it will then render to AVI just fine. If I remove >>EVERYTHING<< from all timelines in project2, then add a new clip that did not exist before, it crashes when rendering to AVI. Project2 contains both AVI and MPG clips created/captured with VS X3 just a couple of days prior. VS X3 has all the latest updates.
When I say render to AVI I mean I select Share->Create Video File->Custom->AVI and leave it at the default of 24bits, 720x480, 29.97fps, Lower Field First, Uncompressed, PCM, 48.000kHz, 16bit, Stereo. Video on the timeline includes MPEG-2, Lower Field First, 24bits, 720x480, 16:9, 29.97fps, VBR, LPCM, 48000Hz, 16bit stereo and Microsoft AVI OpenDML, 29.97fps, 30532.12kbps, uncompressed, 24bit, 720x480, PCM, 48000Hz, 16bit, Stereo.Although this is a rare occurance, it is a real pain to have to recreate the video from scratch every time this happens.
The computer is a new Windows 7 Pro 64bit, Core2Duo E7500, 4GB Kingston HyperX RAM, 750GB WD Black SATA, Radeon X1550, Asus P5QL/EPU, Pioneer SATA DVD+/-RW, Antec 380 power Supply. Windows has all updates, AV is Microsoft Security Essentials, software installed includes VS X3, Adobe PS Elements 8, Super Video Converter, Office 2010, Nero 8 Essentials, Microsoft Expression Web 3, QTIndexSwapper2, Filezilla, Audacity, Adobe Reader 10 and supporting software that those applications install.
View 1 Replies
View Related
Jan 22, 2012
I have a problem with VS X3 due to the fact that the burner crashes. I have made some DVDs with it previously. I have loaded VS X4 trial version and that will burn the DVD. I do not feel that I should buy the new version just to get the burner. The error message is:
Stopped working
Problem signature:
Problem Event Name:APPCRASH
Application Name:BurningApp.exe
Application Version:1.0.0.50
Application Timestamp:4b293ba0
[code]...
View 2 Replies
View Related
Dec 11, 2012
I installed a trial version of Pro X5 with Windows 7. Almost every time I try to capture video it crashes.
Camera is a Sony HDR-HC5E. The only format I am offered is MPEG. Sometimes it begins to capture, other times there is no picture on screen and nothing is captured, most times I get a NOT RESPONDING warning and Video Studio just freezes. Sometimes it works but very rarely!. I have reloaded X5 three times.
View 10 Replies
View Related
Feb 25, 2011
I just bought VSx4 but I noticed it crashes as soon as I try to capture
my camera: canon HV20 -firewire connected
my OS: windows 7
I already:
uninstalled, re-installed VSx4
turned off/pc - camera
connected/disconnected camera
since I installed vsx4 I can't capture in vs x3 too.
View 6 Replies
View Related
Feb 4, 2011
First, it took several days just to get it to install. It finally installed after a sys restore and I was off and running. I really liked the package, especially Express. I played with it for a day, liking it more and more, and then all of a sudden it says " Corel has stopped working". Does this when I trying to do anything. Last thing I did was edit a few old clips and put them back in the folder with the originals (renamed). Could this have caused it? This is getting to be a High Maintanence program.
View 2 Replies
View Related
Feb 6, 2012
I purchased Ulead Video Studio 10 for my son about 4 or 5 years ago and installed it on his Vista machine. When first installed, it worked great. After a few months, it began freezing and/or crashing his computer. I was unaware that he was having problems. He just kept rebooting and then continued until his project was completed, or just got frustrated and quit the project.
When I discovered he was having these issues, we found and ran the available Ulead patches, which improved things a bit for a while. Then, having issues again shortly thereafter, we upgraded to Video Studio 11, which again improved things for a short while. He has been unable to complete a project within the last year. Video Studio is at a point now where it freezes constantly and Vista pops up the message “Ulead has stopped working” with a “Close Program” Button. Sometimes it takes 10 or 20 minutes to freeze, sometimes it freezes instantly and sometimes in between.
View 9 Replies
View Related
Aug 13, 2011
I've been using VSX4 for about 4 weeks without any problems, aside from the very occasionaly crash. The last time I used it was three days ago.
I've tried to use it today to find it crashes at startup every time. I have restarted my PC several times to no avail. As far as I can recall, I have not installed anything in the last three days, or updated drivers.
I have uninstalled and then reinstalled. Again, to no avail.
VSX4 creates a dump file each time, which I can't view in any software I have.
I have tried contacting Corel but get a very cryptic message that a case has been created then "Case creation fail" message!
View 2 Replies
View Related
Feb 10, 2012
VideoStudio PRO X3 crashes very often when rendering a VSP-file (with m2ts videofragments) that contains also transions and text.
It happens when I want to create a HD-file (PAL, Blu-ray /MPEG or H.264/ 1920*1080). Disabling SmartRender did not work. Also setting off hyperthreading did not solve the problem.
The problems do not occur when the VSP-file only contains m2ts fragments.
The recommendations given by Corel Helpdesk (download & install VS updates, C++ and DirectX updates) were not very useful because I had already implemented the most recent updates
My current version of VS PRO X3 is 1.6.2.69.
- Does these kind of problems also occur with VS PRO X4 Ultimate?
View 4 Replies
View Related
Apr 25, 2012
I've been using VSX4 for about 4 weeks without any problems, aside from the very occasionaly crash. The last time I used it was three days ago.
I've tried to use it today to find it crashes at startup every time. I have restarted my PC several times to no avail. As far as I can recall, I have not installed anything in the last three days, or updated drivers.
I have uninstalled and then reinstalled. Again, to no avail.
VSX4 creates a dump file each time, which I can't view in any software I have.
I have tried contacting Corel but get a very cryptic message that a case has been created then "Case creation fail" message!
View 1 Replies
View Related
Sep 4, 2011
So I had VS x3 and it started to give me serious problems, i.e. no longer able to export to MPEG-HD, So now I have X4 thinking it would resolve my issues, but no. Now I cannot even launch X4, as soon as it opens I get an 'unexpected error, program needs to close' message. It freezes immediately, and I cannot even open any menu items. I have tried removing and reinstalling QuickTime 7.55, also tried updating my codecs and uninstalled/reinstalled VSx4, none of that worked. I installed this program on my desktop, and it works fine there but ther only difference there is my desktop runs Vista Ultimate 64-bit, and my Alienware M11x runs Windows 7 Home Prem 64-bit.
View 5 Replies
View Related
Jul 9, 2011
I've been a VS users since version 6 and have been able to work around the many nuances that each version upgrade had. I upgraded to VS X4, got myself a blu-ray burner and some BD-R's, and prepared my home videos. I'm consistantly geting the 'Unspecified Error 5:0:0' during the burning stage. After 6 wasted BD-R discs,.
Camera: Canon Vixia HF20, all AVCHD formatted video
Background music selected for all menus
Motion menu checked (tried unchecked as well)
No background image (using one of the provided 8 templates)
Moving path unchecked (tried checked as well)
Menu In/Out: none (tried both enabled at default, initially)
Video length is 19.66GB total, 26 menued video segments
I've updated to X4 SP1
I even tried copying over the afCvtTitleMenuRenterUnit.dll 'fix'.
For the video segments, I initially let X4 render them all. When it failed, I created video files (previously my standard method when making discs), creating .m2t (blu-ray H.264 (1920x1080)) for each segment and used those video files for all future burning attempts (as opposed to the VS Project files).
I can see the blu-ray disc has almost fully been written to after ejecting it (after the error). However, it can't be read either on my computer or on a standard TV blu-ray player.
I haven't tried burning a DVD yet, and will try that next to see if this is just related to blu-ray discs, or not. I can't really tell if all of the other posts on this similar topic were in regards to DVD burning, or blu-ray burning.
Running into this issue on earlier verisions, I was able to make an ISO file then burn a DVD with other software. That option doesn't seem available for blu-ray discs?
View 3 Replies
View Related
Aug 12, 2013
I have recently been experiencing the following problem. On completion of editing a video I have created a video file; created a new project with the video file and then proceeded to create DVD. I usually want to create more than 1 and specify, say 4. The first DVD is created correctly and plays fine on my DVD player. I then go back into Video studio (which I have left open at the relevant place) and insert the disk for the second copy. The process runs for some time and then comes up with the message "File or folder not found". I then close the program and, although I have asked it to do so, it has not saved the disc image file.
I have got around this problem by using Movie Factory to create a disc image file, from which I then create the additional copies that I need. However, this is less than ideal!
View 5 Replies
View Related
Aug 19, 2013
I've just upgraded from Video Studio X2 to X4, and I've run into a problem. Unlike X2, which still quite happily makes my DVDs for me, X4 however refuses to attempt coding and shows a pop-up which says the following:
"The working folder (C:usersChipsDocumentsCorelVideoStudioPro14.0) may not have enough space. We will clean the converted cache file. You can also change the working folder path in preferences."
Like I said, I tried X2 again and it's working okay. what's wrong with X4 for this to happen and how to correct it?
View 3 Replies
View Related
Nov 15, 2013
Lately I have been having a file created when I close either Video Studi X4 or X5.They are DUMP files which are kept in a folder.I have this files ready to send, because it tells me that I have to send them to the Corel support centre, but I don't know whereI have to send them.I'm also having lots of problems keeping running either of the programmes(X4 or X%). They tend to stop, hang-up, and the screen goes cloudy telling that the application is not running well and I have to force finishing the programme.
View 8 Replies
View Related
May 27, 2013
I have rendered the AVCHD video files (Full HD video) in Video Studio Ultimate X5, and under the "Share | Create Disc" option I created the files to Folder instead of burning directly to Disc as I wanted to save the "Folder" for future Blu-Ray disc burning if needed.
The question is, after the files are created in Folder what is the proper procedure to burn the "Folder" onto a Blu-Ray disc so that the disc will be playable in a Blu-Ray player?
View 2 Replies
View Related
Jun 7, 2012
I'm getting ready to burn a project onto a Blu Ray disc, and after going through the create disc process and selecting 'burn', I get a message that the working folder may not have enough space, but I can select another folder in preferences. That doesn't work, any path I change in preferences just keeps going back to the folder that VSP chose, and always the same message. I downloaded SP2, no difference.
View 2 Replies
View Related
Apr 19, 2011
I'm not sure if the problem I'm having is due to an error in my software, or the age of my computer.
I have an older HP, it's a Pentium D, which how has 4Gb RAM and is running a Win 7, 32 bit system (non hyper threaded). My main drive is only 500Gb, but the 2nd drive is 1.5Tb. I purchased X2 about 18mos ago, had problems with it not loading any videos, then later got into serious HDD issues (later resulting in me replacing the HDD) and never got back around to video editing. So, tried again tonight and am having problems importing video.
I use a Panasonic P&S camera to shoot HD video. I can easily import it via the card reader, and the files come over as Quick Time movies. When I open VS X2, and then under Capture, click on "Import from Folder," I am unable to actually open any folders at the deepest level. I can navigate from the E: drive down a few layers, but never am able to open the folders themselves. I tried dragging a movie file (which I can easily view on my PC using Quick Time) to the top level of E:, and still, it does not show up in the file tree when in Import.
I just installed X2 tonight, and then went and got both the update patches from the Corel site. The HDD is about 6mos old and relatively empty (C: is where programs reside, E: is where photos/video are stored). Install went smoothly.
The other issue I seem to be having is that Corel stops working. That what it says "Program has stopped working."
I don't know if this is a glitch in the program, or if my PC is too old?? It handles Photoshop CS3 and Adobe Lightroom running concurrently, editing large RAW files just fine. Hubby's been out of full time work for 16mos, so upgrades in both software and hardware have been on hold.
View 8 Replies
View Related
Mar 3, 2013
I wanted to make a gameplay, with voice-over, but every time I try to render the project, the Videostudio crashes (When I try to reder it as MPG/MP4/WMV, it crashes at 4%, when I try to render it as avi, it crashes at 91%) SP1 installed. Video files and audio files:
Note: The first Windows shows the bandicam-video properties, and the second one shows the screen capture properties. (*recorded)
My hardware informations are on my profile. The Event Viewer (or something like that, I have hungarian windows) says this:
I tried everything, Even recording my screen while playing the project. But the video was lagging.
View 6 Replies
View Related
