I'm using CS 5.5 with Camera Raw 6.7 on Windows XP. Suddenly, I'm having challenges with images opened and edited in Camera Raw 6.7, with either trying to save directly to disk or opening in Photoshop. I am getting "out of memory" errors. I've purged the caches, etc., but to no avail.
View 5 RepliesI have used PS CS 5 and 6 for a couple of years and never had a crash until I downloaded the current Camera Raw update. Now it crashes in the middle of every edit session. Can I remove the update, or is there some other fix?
View 5 Replies View RelatedJust accessing the "camera roll" folder crashes VS X5. I have to copy every video I want to edit from that folder to somewhere else in order to edit them. FLAT OUT LOCKS UP AND CRASHES if I access the Camera Roll folder in VS X5 in Windows 8.1.
Crossfade is extremely buggy, it leaves pops and sometimes even cuts out the sound completely if one is using a crossfade on a video that has the sound already on it. I usually end up having to record the output of the audio from VS X5 through "stereo mix" with Audacity, save it as a wav, and then mix it into the video again later while muting the original video.
Crossfades are extremely glitchy in general when using AVCHD, the only high quality format that doesn't degrade the sound to oblivion.
Saving as an HD MP4 results in such bad sound degradation that it's almost not usable if it contains music, everything above 12k is pretty much completely hosed.
Thumbnails will randomly unlink themselves, and when you try to re-link them, even though they're there, it doesn't know how to get the name, so you either have to type it in again or select it from the list.
Are these things fixed in X6?
Can't open file from Nikon D7100 in Camera RAW Plug-In,i have Photoshop CS5 and plugin is upgraded.Format NEF from Nikon D 7100 is not in this plug-in photoshop.
View 2 Replies View RelatedI am using Photoshop Elements 11, using WIndows 7 Operating System. I have a new camera Canon Rebel T5i, and having problem viewing images in raw format (cr2).Message in PE11, states, "Camera model not supported by installed version of Camera raw."
Â
Canon software views images. Suspect my minimum camera raw plug in version does not support this new camera..I am unable to locate in the software any menu item that allows me to view the camera raw plug in version.
Have no choices in the camera calibration tab inside camera raw plugin. Use CS3 and Raw 4.6. Are choices only available in later version or PS? Also in Raw preferences choice for camera serial number and also setting as defaults. Where to enter serial number etc.
View 1 Replies View Relatedmy PSE11 was working fine until i bought a new camera and tried to upload photos from my RAW files. It gave me this message
Â
"Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.Please visit the Camera Raw documentation for additional information."
Â
so i tried to install the update.... installed it fine, kept getting the same message when i would try to open the photo. after researching online i found the suggestion of uninstalling and reinstalling photoshop elements. i did that once, tried the update again...same results. uninstalled again. tried the update again and still getting the same message. ive checked the adobe website and everywhere i look says the version of the camera raw DOES support my camera (nikon D7100).
After an, automatic, update to camera raw 7.3 in Photoshop Elements 11 all Camera Profiles are gone. All that is left is "Matrix". I use Elements 11, windows Vista on a 64-bit machine, my camera is a Nikon D7000.
View 2 Replies View RelatedI own a GoPro Hero 3 Black camera. I saw the Russell Brown demonstration of Camera RAW to correct lens distortion (
[URL].......
 In this instruction, he takes images into Camera RAW and selects a tab called Profile, and it automatically detected the camera from metadata and made corrections.
Â
I was sold, subscribed to Adobe Cloud, downloaded Photoshop and started following his tutorial. When I got to the lens correction part, my Camera RAW has no Profiles tab.  Brown does say that you need the latest version, but I have assumed that since I just subscribed and downloaded, that I have that.
how can i create a camera profile with camera raw without x-rite or other third software?
Â
i have a Colour Checker ,with different shade of gray and different colors
Â
i remember about a script or something like that
Â
i google a lot , but without luck
Â
can i create my camera raw profile using a color checker with photoshop acr ?
Â
i'm not sure but this should be the script [URL]....right? but i don't know how use it
Â
is there a tutorial ? maybe a video to create a profile with camera raw.
For some reason when using the path option in inventor studio for camera animation the camera rolls for no reason?? I have created two helical curve sketches around my product, the outer curve is the path for the camera and the inner curve is the path for the target. Both curves are the same height and have 1 revolution. When i play the camera it works out fine untill it hits 1/4 of the way through and suddenly flips 180 degrees so now the camera is upside down, once it hits 3/4 of the way it flips back again to the correct rotation. If i dont create an inner curve for the target and place the target directly in the centre of my product with no path to follow the camera spins all over the place when it follows the curve.
View 9 Replies View RelatedI don't know how to phrase it correctly but the 3d camera tracker inside of After Effects will only apply key frames to the null object. This causes the footage to rotate around itself.
View 4 Replies View RelatedI shoot photos with a Nikon D2X and my wife uses a Nikon D70. If I open a D70 raw file, and then go to camera calibration, the profiles available are for various standard profiles and D2X profiles. The D70 profiles do not show in the drop down list. All of the profiles have been downloaded, from Adobe, and installed.
If I open a D2X raw file, the standard and D2X profiles are shown in the dropdown box.
Have I missed something in the installation? Do the profiles have to be loaded somehow?
I'm an amateur moving up to LR 3 and have been trying to learn this program by reading the LR3 book by Scott Kelby. He shows that the Camera Calibration feature has some settings for specific cameras yet the drop down menu has none listed. I've upgraded to 3.6 and the images were copied from raw to DNG.
View 6 Replies View RelatedI am relatively new to Lightroom. I have imported Panasonic Lumix DMC-FZ200 raw (.RW2) files into Lightroom 5.3.  When I go into the Develop module under the Camera Calibration the only profile that shows up is Adobe Standard. My camera is supported according to the Adobe web site.Â
View 2 Replies View RelatedI am working on a project where I am incorporating 3d text into a shot with an onscreen talent speaking to the camera. I am trying to get the text to only move when the camera moves such as a pan or a hand held shake, making it look like it's part of the environment. It will track with the camera and looks great until my talent /subject moves, then the text moves with the subject. What am I doing wrong in my tracking? I have looked up tutorials and articles searching for others who have had this problem and cannot find anything that replicates my issue. Every tutorial I've seen does the same thing with fantastic results but I can never get the text to not move with my subject.
View 2 Replies View RelatedHow to I get camera profiles into LR 4 and Camera Raw?
View 3 Replies View RelatedPhotoshop keeps crashing every time I convert a 32 bit image to 8bit. I am using Photoshop CS6 v13.0.4 x64 on MAC OS X 10.6.8. I goto Image>Mode>8bits/Channel.When the Merge HDR images Dialogue Box comes up I click "Merge".
Â
At the following window about HDR Toning it immediately crashes. (immediately as in, a second after I took this screen capture) When i click "Don't Merge" it works fine, so it has something to do with the HDR Toning editing capabilities.
Â
I have had problems before with CS6 working with 32 bit images on my Mac. It would render black within my selection. However it worked fine on Windows. In addition some who relied who also used MAC OS X 10.6.8 did it an it worked fine, however, he was using Photoshop CS6 v13.0.1 x64, while I am using v13.0.4 x64. So I think something broke in the later updates for PS CS6 for MAC. If I were to re-install Photoshop would that revert it to v13.0.1?
I got a new computer:
Â
Processor Name:Â Â Â Â Â Â Â Â Â Intel Core i7
 Processor Speed:         2.3 GHz
 Number of Processors:         1
 Total Number of Cores:         4
 L2 Cache (per Core):         256 KB
 L3 Cache:         6 MB
 Memory:         4 GB
OSX 10.8.5
Â
I just installed my CS4 Creative Suite and Photoshop immediately crashes upon making a second layer. Adobe tells me that my computer is not compatible with this version of Photshop and I have to upgrade if I want to use Photoshop. I haven't even checked if the rest of the suite is compatible, but I assume it is not. I did try to update the Adobe Updater. It says "A new version of the Adobe Update is available for intstallation. Click OK to install it now. Note: You may be required to authenticat in order to install.Â
Â
Then it checks all the products in my Suite and returns on an endless loop to the above.
Â
Here is the report when it crashes:
Â
Process:Â Â Â Â Â Â Â Â Adobe Photoshop CS4 [172]
Path:Â Â Â Â Â Â Â Â Â Â Â /Applications/Adobe Photoshop CS4/Adobe Photoshop CS4.app/Contents/MacOS/Adobe Photoshop CS4
Identifier:Â Â Â Â Â com.adobe.Photoshop
Version:Â Â Â Â Â Â Â Â 11.0 [11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch]] (11.0)
Code Type:Â Â Â Â Â Â X86 (Native)
Parent Process:Â launchd [143]
User ID:Â Â Â Â Â Â Â Â 502
[code]....
I have CS4 on my mac OS X 10.8.3. Photoshop CS4 is crashing all the time.I update it regularly.It used to crash using layers, so i changed the graphic settings as suggested in this forum, now this is ok.
Â
Now PS crashes:
- everytime i do "save for web"
- often when i work on text layers
- sometimes for nothing in particular
Â
It is really impossible to work in this conditions.Fireworks CS4 crashes too when trying to save a file.
Below is my system configuration:
**DELL i5 INSPIRON N5010**
Processor : Intel(R) Core(TM) i3 CPU 370 @ 2.40GHz
RAMÂ 6 GB
System Type : 64 bit OS Windows 7 Home Premium
Graphic Card : ATI Mobility Radeon HD 550v (1GB) (No Updates available for last 2 years)
Â
My problem is when I try to work with 3d workspace while using 3d feature for a particular object, it shows 3d platform and default 3d settings/ properties to that particular shape but as soon as i try to click on scene or any other property option in 3d layer menu it stops working and shows not responding error. I suspect the video card as I have only had this computer about one year and no problems with cs5. From what I can find out is that this is one of the video cards not tested by Adobe.Â
Jun 10, 2009 12:05 PM CS4 crashesI recently upgraded from Photoshop CS to CS4. I also run Elements 6. My problem: Now, Elements crashes whenever I use the edit function. CS4 allows all editing features but crashes with attempt to print. I also have a printing utility called QImage. Since installing CS4, QImage crashes with any attempt to open it. As a further "clue", attempting to print from Adobe Reader 9.1 crashes that program.
View 6 Replies View RelatedDoes this sound at all familiar to anyone or has anybody experienced this as well? I have a blank document open and have tried both placing and opening an image (not one image in particular but many) and I recieve a pop up box saying CS3 has encountered an error and needs to close. I've uninstalled all adobe products on my PC and reinstalled them hoping that would help, but the same problem persists.
View 1 Replies View RelatedWhen I purchased CS3 Web Premium it took several months of tooling around to get it to install on Vista HP. Photoshop cs3 worked fine for a few months after installation. It now refuses to open any files - just goes to an eternal spinning icon. When I try to shut it down, it just says not responding. I reinstalled once (takes hours) and it worked for an afternoon. Next morning back to not opening files.
Macine is dell xps M1210, 2Gb Ram, Core 2 T5600 processor, NVIDIA Go 7400 64Mb card.
Photoshop crashes whenever I try to have two files open at once. It's doing it on my co-worker's computer too. Mine has done it as long as I've had this computer, but his just started doing it today; it worked fine before that. We're running CS3 on Vista.
View 1 Replies View RelatedMy Photoshop CS2 has suddenly begun to crash on opening. After a few seconds it says " Unable to continue because of a hardware or systems failiure". All my other programs work OK (I think!). My most recent install was Office 2007.I am running Windows XP SP3 with 1.4G RAM and an Athlon 2G processor.
View 2 Replies View RelatedI just built a system, here's the specs:Intel Core i7 9206GB OCZ RamMSI X58 Pro MotherboardAsus EAH 4870 Top GraphicsVista Ultimate 64 I initially built this system about a week and a half ago, and put a beta copy of Windows 7 on it while waiting for my copy of Vista to arrive. PS installed fine, was blazing fast, and all was good. I then got Vista, formatted the system, etc. Tried to install PS, and it would crash on startup. I figured it was driver issues, so I decided to deal with it later. I updated all the drivers, etc, and it still wouldn't work. I uninstalled it, but got an error on uninstall. Eventually I found the PS Clean uninstall script, and that has been helping. Now when I try to reinstall, it reinstalls fine, but again, immediate crash. I figured, long shot, but maybe somehow my PS disc was corrupt, so I spent last night DLing a trial from here. Again, immediate crash.Running 64bit Vista, I have the option to open wither Adobe Photoshop CS4, or Adobe Photoshop CS4 (32 bit.) They both have the exact same error.This is getting pretty annoying, and I honestly have already spent too long looking through KB articles, and I'm hoping you guys might have a solution for me. I have attached a screenshot of the error I have been getting. If it matters, this is a shot from the install of the trial I downloaded. Regarding a "program" causing it, and Windows closing it, this even happens with nothing open at all, including system tray things. Also, whatever Windows says it will close,
View 11 Replies View RelatedHas anyone had trouble with PS 7.0 crashing when attempting to use the Image Size Function.It was fine until Auto updates from Windows came through a few days ago.
View 5 Replies View RelatedMy version of PS4 that was working fine has stopped working, it crushes at start up. I clean installed the program several times but the result is the same.
View 6 Replies View RelatedEvery time I open Photoshopp CC on my Mac Pro (8-core, 32Gb RAM) I get the spinning beachball of death and the app is completely unresponsive. I have logged out and back in to the CC to no purpose. I am completelt fed up with continually beta testing Adobe's software and paying through the nose for it.
Â
There is also no crash log generated, nor an opportunity to submit one.
I'm not sure why Photoshop CS6 crashes when it saves. Here is the debugging info.Â
Â
Problem signature:
 Problem Event Name:         APPCRASH
 Application Name:         Photoshop.exe
 Application Version:         13.0.0.0
 Application Timestamp:         4f61c045
 Fault Module Name:         aticfx64.dll
 Fault Module Version:         8.17.10.1151
 Fault Module Timestamp:         50525d73
[code].....