following the tutorial in ch 8 of "Design Integration Using Autodesk Revit 2013" by Stine
section 8-36 step 35 Tip "Place all beams and then select them using the Filter tool and change the vertical position all at once"
this sounds nice but the Beams are not an option in the filter tool...
where are the beams in the filter tool?
I have an issue with a view. I am unable to select my model groups with in a specific view. When I go to select a group all that is selected is an item in that group, not the entire group. There must be a setting that is turned off, as other views I can grab entire groups. Currently I have to open a 3-D view and select the group I wish to edit or change, instead of being able to select that same group on the 5th floor of my building. ( I can select the same group on the 4th floor, but I don't see any diference between the two floors?)
We are using Revit 2012
I am working on the project with sloping roof. I have drawn beams with slope. however when I am drawing slab with slopes I am not getting this slopes. There is gap between the beams and slab. I have attached screen shot for more information. Also I need to apply loads for this sloped roof.
View 4 Replies View RelatedIs it possible to filter a selection (6 categories checked instead of 10) and make it as a view template?
So that next time I open up this view, only these 6 categories checked in the filter instead of re-doing the filtering again?
What's a good way to refine a selection when it's a similar color to the background? I have a photo of a dark skinned, black haired person in a white hoodie against an off-white background. I got a pretty good overall selection with the Quick Selection Tool; then I went to Refine Edge.That worked good on his hair, but it made the edge of the white hoodie blotchy, as if it had worn part of it away.
View 3 Replies View RelatedI'm not sure what's going on over at the Adobe Photoshop forum, but I've tried three different browsers and I can't get the Create/reply buttons after I log in. So, since life's too short to put up with whatever they're doing, I'll try here...I do a quick selection, then hit the "Refine Edge" button and make a change to the selection, but my change doesn't "take"...
Take an image, one layer (background), absolutely normal, boring image (for example, a white swan sitting in the blue water). Go in with Quick Select and select PART OF the swan. Leave some areas not selected, and select some water (areas that are selected and shouldn't be). I need to refine my selection. I subtract and add bits of selection with the Quick Select tool, but EVENTUALLY I'm going to have to do a more accurate refinement than the quick selection tool can do.
Hit "Refine Edge" from the tool bar and select "Overlay" for the view mode. I can see what's selected, and know what I'd like to change. I have a red overlay so I have a visual guide to changing things.Go to the "Refine Radius Tool" and paint over an area I want ADDED to my selection (a piece of swan immediately adjacent to my original selection).It runs red, like I'd expect. I release the mouse and a second later, the red goes away, and the selection has NOT been changed. I've tried this several different ways, and I'm unable to refine my selection from the Refine Edge tool...
I looked at Martin Evening's CS5 book, and as near as I can tell, I did exactly what he described..He got a selection, added to the selection, and it worked fine..I figure I've got something configured wrong, or something else goofed up. If I need a complex selection, and do the initial select with the Quick Select tool, HOW do I refine the edges and content of that selection? How SHOULD the "Refine Radius Tool" in "Refine Edge" work?
i keep getting an error message that the selection is empty when i try to create a new layer-via copy after using the rectangle marque selection tool then refining the edge/feathering my photo...
View 1 Replies View RelatedIs there a way to get roof beams/windows/etc to show as dash-dot in floor plan without having to make changes in every family or for every new object?
View 3 Replies View RelatedHow do I save a selection after using the Refine Edge tool?
View 3 Replies View RelatedI just noticed of some of images that Refine Edge creating a strange color around the selection, see my screen attached.
View 12 Replies View RelatedI made an initial selection of a person and selected Refine Edge. I simply want to take the person from his current location and place him somewhere else.
1. Are there any general guidelines for how much feather to add?
2. What about for Radius?
3. And Smooth?
I'm playing with the sliders, though I'm wondering if there is a range that I should try staying within for best results?
Im trying to get used to using Quick Select and Refine edges to mask out objects in my photos.
It works pretty well but Im still having trouble in some spots getting the edge to be a smooth curve.
How do you get the refine edge function to allow you to modify its edge so you can have a perfectly smooth edge?
Ive tried using the Refine Radius Tool and it just doesnt smooth it out completely.
How can I alternate the element selection if both elements are on top of each other? I tried to mouse click on the lement with alt or control keys but nothing worked.
Example. I drew a construction line then I drew the line I want to keep on top of it. Now I am trying to delete the construction line but the new line keeps highligting.
I have a problem that when I add elements to a layout view. These elements contain parts of my drawing and have an outline to them in the layout view. This is handy when working in the layou view, but they are also being plotted when I export to PDF. How can I make these borders disappear in the plots?
View 4 Replies View RelatedI am used to searching for Elements by using their IDs, however in editing a door family I have been stumped by a dialogue, herewith:
The unusual thing with this is that this dialogue is always followed by another stating that 'No good view could be found', whatever view I try to look for them in! Having opened every view in the family and done a search I am wondering what next to do?
I am exporting gbXML file from Revit Architecture 2013. And I am looking at the format of the name of the surface element. According to the Autodesk wikihelp, I understand that it is composed in a form as : orientation-space-(other space)-exposure-type-sequence number-(opening type)
It means if the surface is an interior wall surface, there will be two adjacent space names recored here. such as N-101-102-E-W-D-84
But I notice that in my gbXML file, I have some terms like : B-2-2-I-F-10, B-2-2-I-F-16, X-1-1-I-O-6, and X-1-1-I-O-15, I notice that when the orientation is "Bottom" or it is a type of "air", the space names will repeated twice.
(Can't edit the element until 'A' resaves the element to central and relinquishes it and you Reload Latest.).this note come when i try to modify or erase any element in revit file and i want to know why does this proplem occur ? and how can i resolve this proplem becouse ineed this file.
View 1 Replies View RelatedI'm working on a project incorporating field inspections into a Revit model. I have a model built, and I'm trying to export information regarding each structural element (family, type & instance, dimensions, etc) into an 'inspection sheet' (excel spreadsheet or text file). After the field inspection, my goal is to update the Revit model with inspection results. For example, damage to a beam might include a reduced cross sectional area/reduced moment of inertia.
View 2 Replies View RelatedWhen i hide an element in a particular view by rt click .- hide element. It does hide ..How do make it visible when required?
View 7 Replies View RelatedHow do I apply a Project Parameter (not Shared Parameter) that I created in Manage> Settings > Project Parameters to an existing element.
Following the instructions under Creating a Project Parameter in WikiHelp for Revit 2013, I created a Project Parameter called "Equipment ID" (common, text, text) in Manage> Settings > Project Parameters. In the process I clicked the Modify button and assigned it to all Categories by checking all boxes. However, when I opened the family editor for a piece of electrical equipment, selected an element (an extrusion), and then went into the Family Types dialog and clicked Add Parameter, it did not give me the option of adding Project Parameters, only Shared Parameters.
WikiHelp, under "Project Parameters", states "Project parameters are parameters you define and then add to multiple categories of elements in a project", but does not say how to "add" them to the element and doesn't direct me to another section that dose.
Is it possible to show the exterior walls at a different detail level than the interior walls in the same view? Keep in mind they are all apart of the basic wall system family so there is no editing the family visibility at this point.
View 1 Replies View RelatedProblem: in order to get Revit Mep to calculate roofs in the heatload calculation I the floor I used need to be a roof.
Revit MEP does not calculate any roof area since in my model I used floors to finish a level. Which i architurally correct. But partially it's also a roof. Revit Mep does not use the floor as a roof. So what i want to do is to redefine a complex floor with lots of curved sides etc. into a roof.
The question is: is it possible to just tell revit somehow to change the categorie of the element to roof? or do I have to redraw the whole floor as a flat roof?
error: Can't obtain permission to edit the element: The Central Model is inaccessible. You can check out worksets at risk, but consider carefully!thats what it says i took the file of my the drive but cant edit it.
View 1 Replies View RelatedExist a way to Attach the top of the wall in a element that is not a floor or roof. I have a wall under a stair and i want to make de top of the with a slope.
View 2 Replies View RelatedI've utilized the Plywood-Section detail component out of the Imperial
Library, and it runs left-to-right, no matter the orientation of the element I drew. Messing with the Fill Pattern settings, it looks identical if I set the Plywood-Align pattern to "Align to Element", or "Orient to View". Nothing changes.
Is the attached possible? I'm trying to cut out the plaster wrap to a wall, but can't figure out how to do it.
I've had a look at using reference planes in the door family object, but they don't seem to be able to do this?
Simply checking the wall type to wrap at only the external insert isn't going to work as I want the recess in the plaster to be away from the door frame edge.
I am using Revit Arch 2011 and it is more natural for me to use shift to add to a selection and control to subtract from a selection. Can this be changed and how?
View 1 Replies View RelatedIs it possible to use something like a parameter that would allow you to enter a width in the element properties window of the selected wall(s)?
we would like to have a generic wall (outline only) that the width can be changed per wall for layout purposes, then the walls will be selected & changed later to an actual wall with known materials.
We have our first project in Revit that we are having to split among multiple sheets because of the size of the building, so I have made 3 dependent views from the main overall view, named them, cropped them and placed each part (A,B, and C) on separate sheets. Now that I am trying to do enlarged toilet plan views, I want to tag the plans with the plan callouts on the 1/8” sheets that are the dependent views, but all the view tags are referencing dependent view A since it is the first dependent view in the list. If I change sheet A to be named Sheet X for instance, all the view tags now reference sheet B since that becomes the first dependent view alphabetically. I want them to reference the sheet they appear in, but I can’t seem to figure out how to do that, even though they are in different dependent views completely and within the crop region, they all default to the first dependent view in alphabetical order.
View 4 Replies View RelatedI am a new user to this may seem simple. When I render a 3D view the roof disappears in the render view, but when I switch to show the model it is there.
View 6 Replies View RelatedI have a 3D view and when I turn on the clip boundary everything disappears, which leads me to believe that the clip boundary is off to the side somewhere. I zoom out & out, but can't find it.
Is there a way of resetting it? I could just make a new view, but I'd have to set the perspective again.
In this view I have hidden all the objects except for the one (a book case) that is being detailed. Every time I model something new it shows up in this view. Is there anyway of stopping new objects showing in a given view?