Revit :: Import / Export Element Information?
Feb 13, 2014
I'm working on a project incorporating field inspections into a Revit model. I have a model built, and I'm trying to export information regarding each structural element (family, type & instance, dimensions, etc) into an 'inspection sheet' (excel spreadsheet or text file). After the field inspection, my goal is to update the Revit model with inspection results. For example, damage to a beam might include a reduced cross sectional area/reduced moment of inertia.
View 2 Replies
ADVERTISEMENT
Feb 13, 2013
I am working with a set of dynamic blocks, each with a block table that provides a drop down for the user to alter attributes from. My goal is to be able to update the block table using VBA to push data from an excel file. I do have import/export code that will update block attributes, but I am not sure the functions that would access the table properties.
View 7 Replies
View Related
Jun 20, 2011
while importing attribute info back into a drawing, is there a way to tell it to skip a field? Say if I was working on a border block with attributes and some the the attributes were fine like the page number and description and I just want to change certain fields without disrupting others.
View 1 Replies
View Related
May 16, 2013
Can Revit export to Autodesk Maya and retain all the texture information?
View 5 Replies
View Related
Apr 25, 2012
My Corel software sometimes exhibits a kind of glitch where a text element won't show up just after I've created it and most of my fonts disappear. If I go to wire frame view I can see that the text is there, it's as though the text is just white, but I can't change the color to anything else. I can change the font, but I have to do it blindly because most of my font list disappears.
View 5 Replies
View Related
Jun 29, 2011
how to import and export ETABS file to Revit Structure 2012 & vice versa. I need to show this to one of our customer how it can be done exactly. I could have tried this, but I don't have ETABS software.
View 5 Replies
View Related
May 23, 2012
Is there a way in Revit to export or import settings much like a profile in AutoCAD and how I set up the icon to point at that profile when the program opens? I would like to know how be able to customize where the program looks for the families and other items over the network, so all users can see the same thing, in options.
Attached is the properties of the AutoCAD icon. The Target is set-up to point to the "AutoCAD Architecture (US Imperial)" profile. I would like to do something similar in the Revit icon.
View 1 Replies
View Related
Jan 6, 2014
My firm is starting a project....the Structural side is going to be don in Revit 3d and our Mechanical side uses Autocad w/Cadworxs for our 3d package. Is it possible to export the Revit steel drawing and import that model into Autocad as an xref?
View 1 Replies
View Related
Mar 17, 2010
how you could select only one element from within an AI document and be able to export just that element out. For example, I'm making a letterhead and I want to select just a logo element from my page and export just that to an eps so that it could be imported into something else.
Back when I was using Corel Draw I could simply select anything and as long as it was the only thing selected I could export it to a new eps file, or whatever kind of file I wanted. If I did it with an image, the image would be cropped to just the bounds of the image.
So far it seems the only way to do this in AI is to export the entire artboard. I'm sure this can't be because that would be ludicrous, right?
View 11 Replies
View Related
Dec 4, 2012
I am used to searching for Elements by using their IDs, however in editing a door family I have been stumped by a dialogue, herewith:
The unusual thing with this is that this dialogue is always followed by another stating that 'No good view could be found', whatever view I try to look for them in! Having opened every view in the family and done a search I am wondering what next to do?
View 6 Replies
View Related
Feb 6, 2013
I am exporting gbXML file from Revit Architecture 2013. And I am looking at the format of the name of the surface element. According to the Autodesk wikihelp, I understand that it is composed in a form as : orientation-space-(other space)-exposure-type-sequence number-(opening type)
It means if the surface is an interior wall surface, there will be two adjacent space names recored here. such as N-101-102-E-W-D-84
But I notice that in my gbXML file, I have some terms like : B-2-2-I-F-10, B-2-2-I-F-16, X-1-1-I-O-6, and X-1-1-I-O-15, I notice that when the orientation is "Bottom" or it is a type of "air", the space names will repeated twice.
View 1 Replies
View Related
Jun 29, 2013
(Can't edit the element until 'A' resaves the element to central and relinquishes it and you Reload Latest.).this note come when i try to modify or erase any element in revit file and i want to know why does this proplem occur ? and how can i resolve this proplem becouse ineed this file.
View 1 Replies
View Related
Oct 15, 2013
if it is possible to import PDF content and animate each element of it. For ex., animate the titles, some text, some images? Then, export into a swf. file? I am not sure if AfterEffect is the best way to do it? Flash, Illustrator, maybe?
View 4 Replies
View Related
Aug 8, 2011
When i hide an element in a particular view by rt click .- hide element. It does hide ..How do make it visible when required?
View 7 Replies
View Related
Sep 28, 2012
How do I apply a Project Parameter (not Shared Parameter) that I created in Manage> Settings > Project Parameters to an existing element.
Following the instructions under Creating a Project Parameter in WikiHelp for Revit 2013, I created a Project Parameter called "Equipment ID" (common, text, text) in Manage> Settings > Project Parameters. In the process I clicked the Modify button and assigned it to all Categories by checking all boxes. However, when I opened the family editor for a piece of electrical equipment, selected an element (an extrusion), and then went into the Family Types dialog and clicked Add Parameter, it did not give me the option of adding Project Parameters, only Shared Parameters.
WikiHelp, under "Project Parameters", states "Project parameters are parameters you define and then add to multiple categories of elements in a project", but does not say how to "add" them to the element and doesn't direct me to another section that dose.
View 9 Replies
View Related
Aug 11, 2011
Is it possible to show the exterior walls at a different detail level than the interior walls in the same view? Keep in mind they are all apart of the basic wall system family so there is no editing the family visibility at this point.
View 1 Replies
View Related
Aug 22, 2011
Problem: in order to get Revit Mep to calculate roofs in the heatload calculation I the floor I used need to be a roof.
Revit MEP does not calculate any roof area since in my model I used floors to finish a level. Which i architurally correct. But partially it's also a roof. Revit Mep does not use the floor as a roof. So what i want to do is to redefine a complex floor with lots of curved sides etc. into a roof.
The question is: is it possible to just tell revit somehow to change the categorie of the element to roof? or do I have to redraw the whole floor as a flat roof?
View 2 Replies
View Related
Apr 17, 2012
error: Can't obtain permission to edit the element: The Central Model is inaccessible. You can check out worksets at risk, but consider carefully!thats what it says i took the file of my the drive but cant edit it.
View 1 Replies
View Related
Aug 31, 2012
Exist a way to Attach the top of the wall in a element that is not a floor or roof. I have a wall under a stair and i want to make de top of the with a slope.
View 2 Replies
View Related
Apr 11, 2013
following the tutorial in ch 8 of "Design Integration Using Autodesk Revit 2013" by Stine
section 8-36 step 35 Tip "Place all beams and then select them using the Filter tool and change the vertical position all at once"
this sounds nice but the Beams are not an option in the filter tool...
where are the beams in the filter tool?
View 6 Replies
View Related
Aug 28, 2007
I've utilized the Plywood-Section detail component out of the Imperial
Library, and it runs left-to-right, no matter the orientation of the element I drew. Messing with the Fill Pattern settings, it looks identical if I set the Plywood-Align pattern to "Align to Element", or "Orient to View". Nothing changes.
View 9 Replies
View Related
Oct 4, 2013
Is the attached possible? I'm trying to cut out the plaster wrap to a wall, but can't figure out how to do it.
I've had a look at using reference planes in the door family object, but they don't seem to be able to do this?
Simply checking the wall type to wrap at only the external insert isn't going to work as I want the recess in the plaster to be away from the door frame edge.
View 3 Replies
View Related
Nov 27, 2012
My Engineer has a Hec-ras file that he has been working on and I need to change some of the sections. I don't want to re-export all of my sections to a .goe file and lose the work he has already carried out.
Is there any way of exporting the necessary sample line information into a CSV file, as I believe this will be the best way to make the changes to the hec-ras data without losing the work which has already been carried out.
View 2 Replies
View Related
Jun 29, 2013
The photo information isn’t shown anymore in the exported JPGs in the IPTC since LR4, but it still functions in the TIFF format. Is there a possibility to fix this error?I work with Mac OS X Version 10.7.5 - Lion - LR 5
Is there a possibility to export LR5 photos into grayscale?
View 2 Replies
View Related
Aug 11, 2008
Is it possible to use something like a parameter that would allow you to enter a width in the element properties window of the selected wall(s)?
we would like to have a generic wall (outline only) that the width can be changed per wall for layout purposes, then the walls will be selected & changed later to an actual wall with known materials.
View 9 Replies
View Related
Sep 30, 2011
I've been tasked with looking into the capabilities of Inventor, which we (company I work for) may not be using to their fullest. Now, I am not an Inventor user, I'm on the IT side (programming), but I know the general process for how our models/drawings/documents are created. I think a good word to describe our process is "kludgy". From what I've found in searching for a handful of hours, it seems that Inventor could do what we are doing in other programs, easier and faster.
The background: We have a database and application setup for tracking BOM with costs, weights, etc. We are using Inventor 2012 as well as Vault. We already have lots of parts and assemblies drawn/modeled. Most of our drawings/documents are made in AutoCAD, though I'm not sure how much is coming from Inventor. There are some internally developed macros for exporting these to other formats (.doc).
Would it be possible to import in the data that we already have elsewhere, and match it up to our parts/assembles in Inventor/Vault? This could allow us to improve the process by taking out some of the manual work (in AutoCAD), and improve the accuracy of the information (manual data entry).
View 7 Replies
View Related
Feb 24, 2014
After importing my images into Lightroom 5.3, I discovered that the GPS location data was imported for some images, but not for others. When I checked the metadata files for the same images in Bridge, the location data was present for all of my recently downloaded images.
Why would Lightroom import the GPS data for some images and not others?
Is there any way to import the location data from the Bridge metadata files into Lightroom?
View 6 Replies
View Related
Jun 11, 2012
After you you click on view normals to see them in the viewport, is there a way to export that information in some sort of text format that tells you the exact angle of each normal on a mesh? I need this information for the average normal information.
View 1 Replies
View Related
Jun 10, 2013
Is there any way to export a 3D dwf that includes layer information? In searching for an answer to this there were some responses that it really wasn't possible, however those were from previous versions of AutoCAD. I'm using 14 now. Is there any new functionality in 14 that allows this?
View 4 Replies
View Related
Oct 23, 2013
I want to wash my .jpg files through LR 5 in order to display the filenames. Via the Slideshow module I have been able to select and direct the displaying of the desired metadata option. When I export the files the displayed metadata information does not make the trip.
View 7 Replies
View Related
Sep 16, 2012
When I export an image with no copyright data from Lightroom 3, copyright information is being applied from one of my metadata templates.
View 20 Replies
View Related
