I have a problem that when I add elements to a layout view. These elements contain parts of my drawing and have an outline to them in the layout view. This is handy when working in the layou view, but they are also being plotted when I export to PDF. How can I make these borders disappear in the plots?
View 4 RepliesI am trying to create a layout view using the view manager in paperspace. Whenever i click on define window, it does not record any information no matter where i click. If i do the same task in model space, it accepts the window i select. I am currently using civil 3d 2013 with the latest updates.
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
i have a template, created a viewport and fit the model view in the layout space. However, when i scale the template... the viewport model doesn't follows the layout scale. Is there any ways to fit it so that when i scale the template i don't have to set the view again.
View 8 Replies View Relatedfollowing the tutorial in ch 8 of "Design Integration Using Autodesk Revit 2013" by Stine
section 8-36 step 35 Tip "Place all beams and then select them using the Filter tool and change the vertical position all at once"
this sounds nice but the Beams are not an option in the filter tool...
where are the beams in the filter tool?
CIvil 3D 2013 / My drawing opens in layout view and all model objects are appropriately coloured by layer. If I hit plot at this point, my colour dependent .ctb file works fine. However, once I swtich to model view, all my linework turns white and if I switch back to Layout view it remains white and plots each line with the weight assigned to the colour white.
View 2 Replies View RelatedI have just switched from Pc to Mac with AC. Not sure if its the platform change, or the later version, but I am having problems doing things I used to have no problems doing!
I have duplicated a layout, but when I click on the inside of it it wont make it active and allow me to zoom the view.
If I create a new layout, I can click inside and zoom, however, in this instance, its quick for me to duplicate and re-zoom, if only I could I have tried the MV > L > off command, but that is wanting me to select an object, and not unlock the whole layout. Same thing if I hit the lock or freeze button on the right hand tool panel.
i already know how to change the viewport scaling from 1:1, to 1:10, to 1:20, and so on but my real issue is someone before me change the view scale from 1:1 to 1:.808XXXXX. when i print my figures from the layout everything that is not in the viewport ( like my scale bar) come out shorter that it is on the the screen in paper space. Ive tried to change it back to 1:1 but it wont accept it and keeps the .808XXX value.
View 2 Replies View RelatedThe problem: I add a dimension in Model Space, but it is not visible in Layout. No problem with drawing items, only dimensions. After some "floundering" (not an official AutoDesk term), I see the dimension in Layout. Don't know what I'm doing wrong, or how I manage to get the dimensions to show again.
LT 2011
Windows XP
I received a drawing that has a layout with multiple mviews in it. There is a light grey grid showing in the layout, that I can't make disappear. Grid on / off command has no effect. Really it doesn't matter if the grid is showing, but it's so annoying! Creating a new layout would fix the problem, but is there an easier way to get rid of the grid?
View 9 Replies View RelatedAs the layout tabs I'd like to have a multiple model-views tabs.
I can use layouts tabs, I can change the background color to same as model tab and all its ok.
However I'm unable to set scale to have text and annotation with a "human" size (that is, thinking on my screen and not on the paper).
Maybe this is a newbie question but I'm lost....
What is what I must to set ? I dont want to use layout to print, but to view my drawing with custom layer settings.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Civil 3D (2013) how much you have to improve....
Can I insert a field in the title block in the layouts that will show the date of the last change made to the part of the model that is shown in the layout view.
View 2 Replies View RelatedI am trying to rotate a survey in layout view so that it will print at 1:1000 on an A0 piece of paper as the survey is orientated NEW. When I try and rotate it in viewport so that it is aligned to the paper and then go back to model space the co-ordinates have changed. It is a important that the co-ordinates remain correct in model space as this is a real world hydrographic survey.
View 9 Replies View RelatedIm using A.cad Mech 13 I'm having a problem with the base view command on the layout tab,I have a 3D object in model space I then click the base view command,select my object and select display in layout 1, I then select my views top,side and Isometric when I hit enter to confirm all views disappear leaving my template empty.
View 2 Replies View RelatedMy instructor had showed me how to add my name to my projects assignments and I have forgotten how to ad my name and project assignment name to my layout projects.
View 1 Replies View RelatedHaving issues with where the first section view starts when trying to place multiple section views on sheets. The problem I am having is that the offset from the bottom of the sheet frame seems to be a half unit off and grid lines will not line up with the sheet gridlines we have developed. I attached a pdf of the resulting offset. what I need to look for to adjust the bottom offset?
View 2 Replies View RelatedI have used the following code in a small app to create named views: LINK_TO_Autodesk_Help_Topic
However...A user of mine tried running the command while in a paper space layout. It appears the view still gets created but only within Model Space.
The help DOES SAY that "a default model space view is created", but how would I specify that I want the view to be created within the "current" layout, either Model or Paper space?
I tried setting the .OwnerID property of the ViewTableRecord to "doc.CurrentSpaceID" but that did not work - no error either.
Why line display in model view and layout view could be different?
For example, a line of width 0.35mm and short dashed style is displayed correctly in model view, but in layout view is displayed as thin as the default width, and its dash style is also changed (dash length and interval).
Why does this happen and how to prevent it?
line.png
My issue is this: While trying to print or pdf a drawing in (lets say 8.5x11) layout view, the edges get cut off. It looks as though the template I copied is too large to be printed in full. If this were the case, wouldn't it be the same even if I tried printing in extents? It still does the same thing printing in extents.
I am using Mechanical 2012.
I have an image (jpeg) showing in the model view as transparent 50.
However, when it is viewed in Layout view the image is not tranparent. The VP transparency is also set to 50 in layer properties.
Centering the drawing (or viewport) in the lay out, I’m not sure about the best practice to center my drawing in the lay out so that it will be centered as it sis printed from the lay out
This issue is already discussed in the link below
[URL].......
The size of the A4 is 29.7x21The size of by title block is 27x19Then I have like 1 cm margin from top, 1cm and bottom, 1.35 cm from left and 1.35 from rightI managed to have the view port / drawing centered on the A4 layout by setting the “plot offset” to be: X=13.5 and Y=10 using the printer “dwg to pdf.pc3”
It looks fine in the printed pdf, but when it is printed using printer “HP LaserJet P2050 Series PCL6”, the drawing is not centered on the hard copy A4 paper (attached)
What might be the issue here? Is the approach that I used to center the drawing in the layout is efficient? Why the drawing is centered correctly on the pdf but incorrectly centered in the printed A4 paper?
I am looking to import an Inventor file and create views of it in AutoCAD 2013, However this is what appears under my Layout ribbon.
View 9 Replies View RelatedI would like to find out if it is possible to produce a drawing with more than one view frame plotted on a single sheet/layout. I was thinking of minimizing on the number of sheets used for Linear features.
View 2 Replies View RelatedI am having trouble trying to change the View Scale in the the layout tab. Someone before me changed it to be 1:0.808 and now when i print my drawings they are all smaller than what is shown on the screen. how do i go about changing this number so its 1:1?
View 9 Replies View RelatedFor some reason some of my files are displaying as black and white in Layout view. The files display as they should in color in model space. These files contain color layers but the color can only be viewed in Paper space when I select an object and am moving it.
View 4 Replies View RelatedWhy the dashed line (view area) changes on a page layout between plotting to pdf and plotting dwg to pdf? I have a title block that measures 16.25 x 10.25 that will print fine to pdf (for 17x 11). This same block will not print completely when using dwg to pdf.
In creating the page layout for pdf (only)the offset is .125 x .125. Once created, if I use this layout and then choose dwg to pdf as my plotter I do not have the ability to "fit to paper"
In creating the page layout for dwg to pdf the offset is .228 x .70. When bringing in the title block at 0,0 there is no way for this block to fit inside the dashed viewing line. The amount that this block extends beyond the top dashed line is way beyond what is available at the bottom.
I am having an issue with my template that I created from an old drawing: the quick view layout thumbnail still shows the old drawing in model space. All of the paper space thumbnails update themselves as I work, however model space does not. It shows the old drawing both when I hover over the model space tab, and also when I pull up all of my quick view layouts. I am using AutoCAD 2009
View 4 Replies View RelatedI have a 3D drawing in model space which I want to print with different views. I know how to make viewports for top orthographic view, side, front and 3D perspective view, but I can't figure out how to make a sectional view viewport from the 3D drawing as well.
Also, I can't figure out how to have autocad place hidden lines and centerlines for me.
In modelspace I have a drawing that is aligned perfectly, but when I create a new viewport in a layout the drawing that was created in modelspace seems slightly rotated in the layout view?
View 3 Replies View RelatedI have used Autocad since 1991, and my current job required me to use Microstation. One feature I liked from Microstation is the ability to select and open an external DGN reference, and then match the view of the parent DGN, called the "EXCHANGE" command. In AutoCAD, you can also select and open an xref, but the DWG opens to the previous saved view, and not to the desired view that matches the layout.
My thought was to experiment with lisp or script and export the "Viewctr", "Viewtwist" and "Viewsize" variables to a text file, then importing the text file and using the "Viewtwist" as my "SNAPANG" value, then "Viewctr" as my "ZOOM, CENTER" value, and finally the "Viewsize" as the "Enter magnification or height:" value.
But, alas, I have no time, and not quite the knowledge to duplicate MicroStation's open-xref-and-zoom-to-view feature. I hesitate using the REFEDIT, which works fine for regular AutoCAD, but not so much for Civil 3D and the objects it creates (labels and other items with data shortcuts).
We have a map of our primary lines in an ESRI .shp file, that superimposes nicely on our other shape files, for shoreline and rivers and everything else, that works fine. As part of some project planning I'm doing, I'm making a series of layouts, each taking a snapshot of an area, with a revision cloud around the lines we're planning to replace.
I loaded the map up this morning and everything was as I saved it, but as I was creating a new layout and zooming to the correct region in my view port, every single revision cloud I drew disappeared. As did all the annotations and other labels I'd made - absolutely everything that isn't from a database just up and vanished.
I've turned off all the database links, there's nothing covering them up, I had none of them selected and used no delete commands, all I did was create a new layout via copy and adjust the viewport on it, they're just gone.
I have used Autocad since 1991, and my current job required me to use Microstation. One feature I liked from Microstaiton is the ability to select and open an external DGN reference, and then match the view of the parent DGN. In AutoCAD, you can also select and open an xref, but the DWG opens to the previous saved view, and not to the desired view that matches the layout.
My thought was to experienting with lisp or scipt and export the "Viewctr", "Viewtwist" and "Viewsize" variables to a text file, then importing the text file and using the "Viewtwist" as my "SNAPANG" value, then "Viewctr" as my "ZOOM, CENTER" value, and finally the "Viewsize" as the "Enter magnification or height:" value.
But, alas, have no time, and not quite the knowledge to duplicate MicroStation's open-xref-and-zoom-to-view feature.