Revit :: How To Delete A Particular Dimension Line
Oct 2, 2012How to delete a particular “dimension line”? I wanted to delete one of the “dimension lines” but sounds to delete all the connected dimension.
View 4 Replies
ADVERTISEMENT
Revit :: Dimension Text In Line With Dimension
May 30, 2013is it possible to have a dimension style setup that shows the dimension text inline with the dimension - without having to move it?I have been looking but cannot seem to do it - is it possible and I am just missing it?
View 1 Replies View RelatedRevit :: How To Dimension To End Of A Non-parallel Line
Sep 26, 2013I need to dimension between the face of a wall and non parallel wall opposite it. The non parallel wall turns a 90 degree corner, and it is at this corner that I want to measure perpendicular to my first wall.
1. Is there a way to dimension between non-parallel walls? When you place the dimension you click on the wall at the location you want to dimension, so I don't see why Revit can't place the dimension at that point. That dimension would be particular to that one point along the non-parallel wall.
2. I got around this by placing a reference plane and dimensioning to that, but I'd rather not do this because then if I hide the reference plane, my dimension disappears.
Is there another work around or am I missing a tool I don't know about?
Revit :: Adding Dimension Witness Line?
Sep 10, 2012We have one project were we can't add new witness lines to a dimension. We've checked it being pinned, Workset, etc. and can't find a reason for this. If you select Edit Witness Line, hovering over a most objects (including grid lines) won't highline them.
View 5 Replies View RelatedAutoCAD Architecture :: Avoid Getting Zeros When Creating Dimension Line With Quick Dimension Command?
Dec 4, 2013How can I avoid getting zeros when creating dimension line with quick dimension command. the Zeros indicates the line itself. how it can be avoided?
View 5 Replies View RelatedAutoCAD Architecture :: Producing Dimension Line Without Actual Dimension
Jun 23, 2011I want to insert dimension lines on this project. But instead of having an actual dimension I'd like it just to be a letter that refers back to a chart of possible dimensions for that element. How do I do this? I'm using AutoCad Architecture 2012.
View 1 Replies View RelatedAutoCad 2D :: Change Dimension Line Length When Text Is Outside / Beside Dimension?
Feb 21, 2013Can i change the length of the dimension line 'extension' when my dimension text placement is beside the dimension line (see attached image)?dim line length.jpg
View 6 Replies View RelatedAutoCad 2D :: Angle Dimension With Text Below Dimension Line?
Jul 29, 2011When doing an angle dimension and trying to put text under the dimension line, the text types out straight which if long enough will extend over the dimension line. Other then creating text with arctext, is there no other way to get it curved? I am using AutoCAD 2010.
View 3 Replies View RelatedAutoCad 2D :: Add Text In Dimension Below Dimension Line?
Apr 25, 2008my normal dimension style has text above dmension line & I want to add 'typical' to it below dimension line.
I have done this lot of time in my previous job an year back. but I can't seem to remember what to type between dimension text & the word I want to add in edit text box, so that it appers below dimension line.
AutoCAD LT :: Extension Line Extending Too Far Past Dimension Line?
Apr 30, 2013I am having an issue with my dimensions. If I have a dimension that is 1'-3" or larger, my extension line beyond my dimension line extends the normal length, but as soon as my dimension goes under 1'-3", the extension line then gets twice as long outside of the dimension line (see attachment). I have researched...and i can't seem to find a dim variable that will let me change this. is there anything to control this happening once my dimension goes below 1'-3"?
View 1 Replies View RelatedPhotoshop :: CS4 / How To Get Tool To Delete X Line In A Straight Line
Aug 1, 2012I want to erase the watermark and x mark from a istock image for comping purposes. What is the easiest/fastest way to do this? Clone Stamp/patch tool? If stamp tool, how do you get the tool to delete the x line in a straight line. Mine always copys pixels next to it.
View 2 Replies View RelatedRevit :: Change Line-weight Of Annotation Line?
May 25, 2012I've seen umpteen explanations of how to change lineweights in Revit.None of them address this simple thing I'm trying to do.
I just want to:
1. Create a few lilnestyles that appear along side the other line styles - for instance:
Thin Line, Medium Line, Thick Line, <<Really Thick Line, >> <<Absurdly Thick Line,>> etc, etc..
2. Draw a line
3. Click on the line
4. Select from a drop down list, "Absurdly Thick Line" and have it instantly inherit the linestyle I created.
The only way I can do this is to create a family, make a new subcategory of Detail Items, create the characteristics I want in the line, export it as a .dwg file, then import it into Revit - and then I see the new line style along side the other line styles, and I can then select any line and make it the new line style.
Certainly, there is an easy to find, simple, straightforward way to add line styles to the existing group - and have those new line styles become immediately accessible from the "Modify Lines" Linestyle Drop down Menu.
AutoCad 2D :: Dimension Line Gap?
Apr 24, 2013I need to routinely insert text into or near my dimensions but my dimensions need to be kept as basic dimensions meaning they need to have the box around them as in the picture. What I want to do is what the first dimension shows with the "2x" outside the dimension box but that first one is a combination of suppressing the dimension line and inserting a leader so the 2x will be within the line. Otherwise the normal dimension is what is shown below. How can I increase the line gap from the dimension options without 1) increasing the dimension box with DIMGAP or 2) inserting a line that's separate from the dimension itself or 3) exploding
View 4 Replies View RelatedAutoCad 2D :: Command Line For Dimension Fit?
May 3, 2011Command line for Dimension Fit
View 1 Replies View RelatedAutoCAD .NET :: Dimension Association To A Line With VB
Jun 19, 2012How do you Associate a dimension to a line using VB. I have not had any results searching for an example of this.
View 7 Replies View RelatedAutoCad :: Changing Dimension Of A Line?
Sep 23, 2011I have a dimension line that says 5' and I want to change only the number to 8'.
View 9 Replies View RelatedAutoCad :: How To Adjust Dimension Line
Feb 3, 2012how I can adjust my dimension line to the drawing with the white background ?
drawing.jpg
Revit :: How To Change The Numerical Value Of A Dimension
Mar 29, 2013I was wandering while doing a project of some construction elements if there is any way in Revit that I can change the numerical value of an dimension not with the text but with different value ? and at the same time I don't want Revit to rescale my elements. Something like in AutoCAD that I can type in any number I want and Revit won't rescale i or change the distance between them.
I know that I could simply use AutoCAD instead of Revit but I find it easier in general and I really want to learn it since I'm a student.
Revit :: How To Dimension Imported 3D File
Jun 26, 2013 I'm designing a piece of furniture in Rhino using Grasshopper. I would like to create my measured drawings of this piece in Revit (as a way of learning the software). I have linked the 5 components of the piece to my Revit project file (as SAT files but I could export them as something else if that would work). All I want to do is create a single sheet showing 1 plan view, 2 elevations, 1 section and an exploded axon. However, I cannot seem to dimension the components. I need overall dimensions as well as the size of radii at curved corners in elevation and filleted corners in plan, and also thickness of the material used.
Is there something I need to do to get the dimensions to 'see' this set of objects?
Revit :: Turn Off Visibility Of Dimension With Zero Value
Jun 5, 2012I'm using BIMLink to adjust parameters in a model... If a dimension ends up being zero, is there a way for me to have conditional formatting to turn off visibility of a dimension with a zero value?
View 7 Replies View RelatedRevit :: Dimension Lines Remove?
Jun 30, 2013I'm using revit for my college projects.. When I edit an in placed mass I see these dimension texts, i could use guidance on how to hide these... this started happening today
View 2 Replies View RelatedRevit :: Dimension From One Circle Center To Another?
Jan 14, 2013how to dimension from one circle center to another ("A" in the picture)? Or the angle between two circles ("B" in the picture)? My main problem is that i cant snap to a circle center with any dimension type except for diameter and radius, and then i can only dimension one circle on its own.
View 3 Replies View RelatedRevit :: Mask Regions With 0mm Dimension?
Dec 29, 2013I'm using a couple of masked regions to form symbol linework (so that it obscures background and shadows) in section.
In my screen family, I have a masked region that in theory could end up having a 0mm length - that obviously throws out errors.
The following screen grab shows the regions (at screen soffits) that are set to lock to the frame face and external wall face. Trouble is I have an instance parameter to allow the screen to fill the whole wall thickness (which also then toggles on architraves). This results in the 0mm. I have therefore done a slight 2mm overlap to avoid the issue, but this leaves a residual ovelap in the linework that looks ugly.
Setting the masked region to simply not display doesn't avoid the problem, Revit still 'sees' the errant 0mm.
Is there a way of having this masked region working in both options (ie when needed - locked to ref planes) and then not producing the error when the frame and wall are coplanar ?
Revit :: Aligned Dimension With Text
Oct 27, 2011Is it possible to have an aligned dimension where you can type your own text in the field "under"?
It is only possible to do this with linear dimensions but I have a building that isn't straigth and there I have this problem with linear dimensions that are not parallel with the wall.
Revit :: How To Rotate Dimension Vertically
Sep 14, 2013Is there any way to rotate a dimension vertically?
View 3 Replies View RelatedRevit :: Reference Dimension Points
Oct 30, 2013When I add a wall or door the reference dimensions default to the center of the wall or door, etc. Is there any way to have these reference dimensions default to the structural face of a wall instead of continually dragging with everything I draw?
View 2 Replies View RelatedRevit :: How To Delete View Types
Sep 20, 2012Our template has many view types for floor plans but we don't need them all on every project. I know you can duplicate, but I don't see a way to delete.
See attached.
Revit :: How To Delete Level 0 By Default
Jan 4, 2014I'm creating a Construction Template in Revit 2014. When I create new levels these appear in Floor Plans and automatically generate a new Structural Floor Plan view with the new levels but the previous levels don't appear (those that come in Revit by default).
I dont want to delete the level 0 which comes by default.
AutoCAD 2013 :: Dimension Line Distance
Jan 22, 2013I used direct-distance entry to place the dimensions 3/8 away from the object lines... needless to say, while most horizontal dimensions are 3/8 away, the vertical and inclined dimensions are not. see attached. other than creating construction geometry and physically moving the endpoints of the arrows to the correct location, is there any way of getting this precise and correct the first time i do it?
View 1 Replies View RelatedAutoCAD Inventor :: Dimension Extension Line Jog
Apr 26, 2012Is there a way to do a jog in a dimension line extention?
(Colossians 3:23-25)
AutoCAD 2010 :: Second Line Of Dimension Text?
Mar 4, 2013How do I edit a dimension text to add a second line (so dimension on top of the line and text on the second line)?
View 3 Replies View Related