I'am having an Image in Revit but don't have the Image separately but I need it. How can I get that from Revit. I've tried Export-Image&Animation-Image but the view only get exported.
View 2 RepliesI have a dwg that someone imported and I cannot find where this object is. I have tried searching the database with DBLink, Ideate BIMLink and I have gone into every view to no avail. I also used the reviTTools add-in which says there are no drawings in the file. Am I dealing with a corrupted file? I am super OCD and this is in our Template which makes it an even bigger problem.
View 2 Replies View RelatedPreviously i`m using version 2009 and importing Google earth image and surface works fine. However, recently i tried with version 2010 and i`m having some problem here (imported surface / contour seems ok but the image is too large like 3x or 4x). How to solve that?
View 3 Replies View RelatedI have a complete CD set to export from Revit to DWGs and aside from the complete lack of customization needed for correct NCS layer mapping, my current issue is the company logos on the title blocks exporting as separate files. I am in Revit 2013.
View 9 Replies View RelatedEverytime when I try to export a view or walkthrough in revit 2013, I get a blank image or avi. I do nothing specia. I just use the standard settings that revit has, the same way I did in revit 2012, where it works.
View 1 Replies View RelatedI am trying to use it to do something for school. I imported a 3d object from a dwg file and there is a channel that curves along it cut into that. I want to move a cylinder in this channel. I cannot seem to find anything that will allow me to make a spline that mirrors the edge of the object or to constrain the cylinder to the object.
View 1 Replies View RelatedI imported a character model that I downloaded off of the internet into maya, and I have run into a snag as I'm rigging, skin binding, etc. The model has a main body, but its armor is actually separate geometry. My problem is that the shoulder pads and leg armor are mirrored, so that when one moves, the other one does as well, which is a big problem when I want to animate the model. Is there a simple way to split the pieces up so that they are not mirroring each other? My guess is that they were originally created that way so that each side didn't have to be individually worked on.
View 1 Replies View RelatedI just finished an animation in Flash and imported the JPEG sequence and the audio WAV into premiere. For some reason the audio wont sync up to the animation and I cant figure out why. Everything should be set correctly. The audio was originally created in after effects and even when I imported the JPEGs into the audio file in after effects it still wouldn't sync.
View 1 Replies View RelatedWhen i import the skinned mesh from Maya (v2013) to Unity (v3.3) in FBX format, it becomes dark - the object is lighten only in the middle (by the directional light).There is no problem like this, when i import the same mesh, but not skinned to the joints.I tried all options of skinning (Smooth Bind, Rigid Bind), all settings of export to FBX,- no change.
The meshes are imported to Unity differently: in the the skinned mesh object, the mesh component is attached to the main joint object,and in the not-skinned mesh object - to the mesh object.
The dark mesh can be lighten with several directional lights, but then it's colors are uneven and they flicker when the object animates.
I'm designing a piece of furniture in Rhino using Grasshopper. I would like to create my measured drawings of this piece in Revit (as a way of learning the software). I have linked the 5 components of the piece to my Revit project file (as SAT files but I could export them as something else if that would work). All I want to do is create a single sheet showing 1 plan view, 2 elevations, 1 section and an exploded axon. However, I cannot seem to dimension the components. I need overall dimensions as well as the size of radii at curved corners in elevation and filleted corners in plan, and also thickness of the material used.
Is there something I need to do to get the dimensions to 'see' this set of objects?
We just noticed that the imported cad geometry in a Mass family will not cut in a floor plan view which contains a plan region. Regardless of the location or height of the plan region.
View 4 Replies View RelatedI inserted CAD files and erased them from all views once I no longer needed them, yet some CAD files are still listed in the Visibility/Graphics menu under Imported Categories. Need to just select and delete from the menu, but there is no way to select and delete from the list. How can I simply clear out all imported categories?
View 9 Replies View RelatedI'm importing my Revit file and when I try to select only the roof to apply materials it gives me a selection of "Wood-Sheathing-particlboard/osb" which includes the second floor sheathing and other things I don't want in my selection.
I thought I could add an edit poly modifier and select the individual roof polygons and apply materials to them but when I "Apply materials to selected objects" it applies to all of the wood sheathing,... selection.
How do I break these apart and re-name them?
How I can successfully import a 3d .dwg model into Revit so I can cut through it in plan and section? I built the model in sketchup, exported it as a .dwg, then impoorted this .dwg into a new Revit family. I then loaded this family into the revit file I'm working in. Its cuts through the model on basement and ground floor plans but not on 2nd or attic. For the 2nd or attic it just shows me the roof of my model.
View 9 Replies View RelatedCAD file fails to be imported,As I attempted to import dwg file, I got the message below.
View 6 Replies View Relatedi`m trying to import basement and 1 storey plan from autocad to each different plan view under revit and build up the model ffrom there. is there anyway to align the plan?
View 3 Replies View RelatedI have a relatively simple mass modeled in Rhino that I imported to a Revit Mass Family (via .sat file). I then placed walls, roofs, structure on the face of this mass. However I would like to be able adjust this mass, either in Rhino or Revit and the walls and structure adjust accordingly. Now however, if I reload the mass into my Revit family, and then reload the family to my model, and then attempt to Update to Face, the error "Faces defining this Element cannot be reacquired." and my only option is to delete the offending wall/roof etc.
Is this just a limitation in Revit/Rhino, or am I totally doing it wrong?
Is there any way to change the appearance of a mass imported into Revit? I simply want to change the dark grey that shows in the rendered view and/or the white that shows up in the shaded view so I can control how background buildings (imported through google earth/sketch up) look in my drawings.
I do not want to rebuild the masses with walls, ceilings, etc, because they are just background site elements. I have tried to do this through object styles. I have tried to do this through "Override by Element" and "Override by Category". I am importing the files as in-place masses and there is no way to edit materials because "Materials" doesn't even show up as one of the element properties.
Why can't Revit make extrusion from polylines of imported DXF or DWG models? Revit 2013 update 3.
View 5 Replies View Relatedi have just started using revit. i imported a 3d dwg file into generic model family and loaded into my project.for some reason, the model shows in section, elevation and last level of my floor plan and site plan as well, but it is not showing in my 1st to 2nd last floor plan. can some people tell what are to possible reason for this?how can i get it show show in the plans?
View 3 Replies View RelatedBackground: infrequent user who is in AutoCAD withdrawal but forcing himself to move to Revit.
I've just started a new project. I've imported a survey done in AutoCAD and converted it to a Topo surface.
The surface appears in two of the Elevations (East and North), but not the other two. I have two empty views. I've turned off Crop View. When I did this and a Z A, I was able to find the East and North elevations and move the views over to them. However, I can't find the elevations in the other views.
i have imported a IGES file from Catia to Softimage 2012, i am not able to export it to 3dsmax 2012, if i do this through fbx, obj or other formats mesh is tearing,
View 8 Replies View RelatedHow do I export all the photos I imported back to their original folder just as they were, they haven't been modified, adjusted etc. I imported them by mistake.
View 6 Replies View Relatedi used photoshop to design the website sliced it with image ready and imported as html..but then i check out the website some of the image is pixelated..how can i fix it.to view it as the same thing as i see it in photoshop while designing?
View 9 Replies View RelatedI have an MEP dwg with 3d geometry that I would like to take a lineweighted section through.
I successfully made the section by importing the cad file into a generic mass, but I cant seem to get the lineweights to show up.
I've tried setting overrides and object styles for generic models, but it doesnt register the cut line, only the projection line style.
I also tried importing as an IFC, which also converts the file to generic models, but no dice.
I wish to create a formula for a family parameter which itself references a 'Type' of an imported family. Specifically I wish to create a quoin stack which can be used for a 'reveal' situation either side of a door or window rather than just on a corner. A 'quoin stack,' as that which comes with the revit content files, typically is made up of two vertical arrays which intersect giving alternative long and short sides. Each of the arrays is made up of a different quoin type, a 'Short' and a 'Long' type which swap dimensions from from perpendicular face to the other. This of course is no good for a reveal situation where on the window or door reveal of both interleived courses needs to be the same, whilst maintaining the 'long/short' appearance on the wall face containing the window or door.
I have got so far as to create a 'reveal depth' parameter within the quoin stack family but need to find a way of addressing the 'Long' quoin type to change its 'short' dimension to suit the reveal depth whilst changing the 'long' dimension of the 'Short' quoin type to be the same.
I have a revit file with an imported dwg object. I accidentally deleted all of its layers. How can I purge the object out of the revit file?
View 5 Replies View RelatedWe use Revit Arch as our main familiy modeling software. We are just starting to model familyes in Inventor since we noticed that an EAC exchange new enviroment allows to export Inventor modeled componets into revit whith some advanteges
The problem is than we cant assign materials to the solids, once that we had opened on Revit.
None instance material parameter exist in order to drive the material whit a family parameter, and assignin the material by category is not enought couse we had different components in the same category. sub category assigment is also imposible cause none Subcategory parameter is shown to assign the solid to on sub category created.
assign materials to ADSK imported components?
I have an SAT file that I inserted into a Conceptual Mass Family and then loaded into a Revit project. I have changed the name of the object in the Object Styles/Imported Objects dialog and assigned a unique material to it as well.
When I load it into the project its generally fine, sections/plans/elevations/section boxes work fine. When I try to update the material settings or the material it retains the original material settings. After the second attempt at assigning a new material: Crash Error Unexpected something or other Shut down.
I opened the original Mass famiily and updated the material shading once and it worked fine. I did it again and: Crash Error Unexpected something or other Shut down.
This is not my first time to use this process. Probably the fiftieth time. However it is the first time I've used it in 2014 with the new(really old) improved (fixed) materials dialog.
Is there a bug or known issue in 14 vs. 13. Am I missing a hotfix? It works on 13.
I will start using imported .pcg files for point clouds and I found an extension that AutoDesk has (point cloud feature extraction for Revit) but it is no longer available. I was wondering if there was anyway that I could get it so I can use it. Point clouds are difficult to work with right now in Revit and it looks like this extension will work.
View 1 Replies View RelatedI have a image plane. I would like to move the image of the plane in animation. It looks out then masking. I need only some parts of the image in frame one, and I need other parts of the image on frame 100. The plane isn't moving, only the image is moving in the box.
View 2 Replies View Related