If I create multiple sequences within a project, and 'reset current workspace', only the sequence tab currently selected will remain (at least, this is the case when I save and reopen the project). I tend to sync video and audio on the timeline in one sequence, and build an edited scene in another, so I lose either the synced rushes or the scene-in-progress.
View 5 RepliesThis is all on a single PC. If backburner is half way through a job (like frame 30 out of 300) and the PC reboots, it will start over at from 0. If it completes, it will make that and not restart a completed job. I have also seen is restart suspended jobs on a reboot too. This is all on Windows 7.
View 2 Replies View RelatedMy timeline (no sequences). It does not have columns on the left handside. It does not have a slider on the bottom of the box. It is useless.
View 16 Replies View RelatedI'm making a video with Premiere Pro CS5.0 in Windows 8.1, from footage from an HD camcorder with a 5.1 microphone. When I make the basic sequences, the 5.1 sound is preserved. My New Sequence Settings include: Master track type:5.1, Mono tracks:0, Stereo tracks:0, 5.1 tracks:1, Submix tracks: all zero.
Â
However, when I create a Master sequence (same settings) and drop a basic sequence onto it, the sound appears onto a new Audio 2 Stereo track, although the initial Audio 1 and Master tracks are showing as 5.1.
I notice red cursor jumping back and forth as I play to edit in open project - did not do this before.What can I do?
i recently dragged the Premiere pro cc icon to my apps folder - could this have introduced a time /rendering delay?I think the sound has also become lower!
I recorded video on a Black Magic Cinema Camera (BMCC), which has legendary video quality but an awful on-camera microphone with tinny recording process, and recorded audio on a Zoom H6 which has great low-noise, more bits and greater sampling rate capability.
Â
In Premiere I made a Sequence containing the video footage, then added the H6 audio and synchronized it by waveform to the BMCC's audio, which I subsequently muted. I call this a Source-Sequence, as it is intended as a virtual source media item, to be cut into one or more Edit-Sequences (my term).
Â
Not "holding my breath" but trying it anyway, in Premiere's Project/Bin pane, I selected that source-sequence then did RightClick > Analyze Content. Teasingly, that option was not greyed-out. However all options in the the resulting popup-dialog were greyed-out.
Â
In this situation, to be useful, the speech analysis would need to be available to Sequences, not just to (Master) Clips. Obviously one could render such a sequence to intermediate but that would waste time and disk space and would essentially freeze the state of the Source (e.g. including any sync issues that might be discovered later, or whole-source color corrections issues etc.). If one subsequently altered that state, a re-render, re-link and re-analysis would be required. If a Souce-Sequence were used instead, and no alteration had been made to the audio (or if user indicated "don't care"), then there would in principle be no need for re-analysis.
We are working in a shared storage environment with 4 editors runnig Premiere Pro CC. We set up a Master Project with all the raw media, then split it between 2 editors to sync and create rough assemblies. Afterwards, we need to import the assembly sequences into the master project. I select a bin, Import a project file, select "Selected Sequences", Dynamic Link shows that it's connected to the project, then it takes 10+ minutes (I wish this were an exaggeration) to "load" to project so that I can choose the sequence(s) I want to import. This is even more frustrating when I import a sequence and it brings in duplicate Master Clips, forcing me to go back to the project and figure out what has change with the interpretation of the clips. Is there any way to speed this process up? Projects contain 5000 - 10,000 media elements.
View 3 Replies View RelatedAny way to generate a date created field for sequences ala Avid?
Â
I find a lot of date metadata fields but none of them work for sequences. Im in 7.2.1
We have an iMac workstation here running Premiere that will not open projects or import clips. Here's the sequence of events that led to this:
Â
1. Premiere was locking up on the splash screen whenever it got to "ImporterQuicktime.bundle". I tried trashing preferences and launching with plug-ins disabled and received the same freeze. Based on forum recommendations I removed "ImporterQuicktime.bundle" and "ExporterQuickTimeHost.bundle" from the plug-ins folder inside the package. The software launched fine - but none of the Quicktime files in the project were working. So I then took copies of the above 2 files from the iMac next to this one, with the exact same configuration, and pasted them into the plug-ins folder. Since then - launching the software has generated the below errors.
Â
2. Attempting to open any project gives a long error that starts as: The preset used by one or more sequences in this project requires third-party components that could not be located.
Â
3. Starting a new project and attempting to drag any Quicktime ProRes media into the project gives the error: File Format not supported.
Â
I have trashed the preferences, re-installed the Pro Apps Quicktime Codecs, de-authorized the computer and re-authorized it, and upgraded Adobe Premiere from 7.0 to 7.2. None of which fixed the issue.
Â
I'm thinking about trying a complete re-install of Premiere next.Â
Here's the details:
Premiere Pro CC 7.2
Mac OS 10.8.5
iMac late 2012 model, 32Gb RAM, 2Gb video card
I'm having difficulty accessing the Customization Section for a particular Partial CUI which I need to return the Ribbon Tab Source using AutoCAD 2012.
Here's the snippet
var cuiMain = (string)Application.GetSystemVariable("MENUNAME");
var csMain = new CustomizationSection(cuiMain);
//*** This line return null even when the PartialCUI exists? ****
CustomizationSection csPar = csMain.getPartialCUI("myPartialCui");
[code].......
I have recently installed the newest AC Architecture. Unfortunately I have some problem with tools in one palette CHANGE.
When I choose one of them (f.e. sign door or sign window) I get this kind of allert that "I can not find the tool in the current workspace". I have no ide what can be a problem.
More over on my friend's computer all this tools work correctly but only from the ribbon (it isn't possible to use this tool directly from command space).
I tried creating a custom workspace and was able to do so (without any modifications) but when I was in that workspace, and loaded an old menu, it wiped out all the default workspaces. where / how these default workspaces are stored, or how to upload all my old menu stuff without going through a tedious cui mod?
View 3 Replies View RelatedHave reinstalled Premiere Pro 6.0.5 because I cannot drag Audio Transitions or Effects to any Timeline sequences in my Projects. Have tried modifier keys, but to no avail.
View 1 Replies View RelatedI am realitively new to Premire Pro, and have been working on a stop motion project for my HS. I want to have it to where I can have both of my stop motion sequences playing in the same frame, side by side. I have a sequence of my character doing one thing on side, and another one doing something different, and I want to mash them together to look like they happened at the same time. Like I said I am pretty new to Premire pro, and if you need more infromation, let me know, and I will try to provide.
View 5 Replies View RelatedI want to take a sequence that I had in an old project and put it into a current project, but I dont want it to be one rendered file... i still want too see the fades and make changes to it...
View 5 Replies View RelatedI have made a short film of 6 minutes (in 6 parts on after effects) I have added all the effects and the camera work on AE, but it needs a lot of editing here and there, which I find impossible to do on AE since you can't cut and join scenes like Premier pro. I need to import all these sequences onto premier pro for editing now. The problem is once I import the files, it imports in the right order in systematic folders etc, but it doesn't show any of the camera work or the special effects like gaussian blur etc. All my hard work has gone.
Â
There must be a way you can import the after effects file on premier the way it looks on AE.
Â
Another problem is I read some boards and it has been suggested to edit the clips first on premier and then add effects on AE but I read this really late and I've already composited the whole film on AE. I just need premier for cutting now.
Â
P.S: I also thought about exporting the AE sequences as TGA files but there's ZERO space left in my internal hard disk for that, and it would take forever to export them all anyway. Any other kind of export would reduce the original quality which I dont want, and which I dont have space for anyway, so that option is out as well.
I'm having a really wired problem with Creative Cloud Premiere Pro. All my keyboard shortcuts had disappeared, as you can see in the image bellow:
View 2 Replies View RelatedAfter I flatten a multi-cam sequence, all the video transitions I added have disappeared.
Â
I looked around, and found this item in the list of bug fixes in the July 2013 build-release: "Upon flattening a multicam sequence, transitions are applied on the wrong layers. Can lead to crash with error message […SrcSequenceActionSequenceAddTransitionAction.cpp-57".]"
Â
This does not result in a crash. Obviously, I can put the transitions in again on the flattened sequence (which I have done - client's need the finished vid!).
how do I change the format of my workspace it is limited to vertical only?
View 5 Replies View RelatedI just downloaded 2013 Autocad for MAC and I can't manage to see my drawing toolbars and also don't know where to find workspace settings to change my workspace to autocad classic.
View 9 Replies View RelatedI am trying to go from the 3D Modeling workspace to the 2D workspace without the XYZ coordinate gizmo on the drawing screen (just want to see the XY ucs) to work in 2D format.
View 1 Replies View Relatedis there a way to have the profile be on 2d drafting already as yoju open a new file or should you always open a new file and then change the profile from architecture to 2d drafting?
View 2 Replies View Relatedhow can i know if the current view/display is align with the current ucs?
let's say i have rotate the ucs about z axis 45 degrees and make it plan now i draw some things and then i change back to world
worlducs = 1
viewdir = 0,0,1
ucsxdir = 1,0,0
ucsydir = 0,1,0
but the display is still in the ucs z 45 (ucsfollow = 0) set the view to PLANÂ current (now the view is aligned) but the system vars does not change.
For a plan UCS, you would need to compare the VIEWDIR system variable and the cross product of the UCSXDIR and UCSYDIR system varaibles.
[URL]
Is there a macro/script/deisel that will automatically print a pdf (cute pdf autocad lt 2007) to current plot settings in current drawing directory and give it the current drawing view name and number? Disk space not a problem these days and would save time to have a pdf copy of all drawing tabs readily stored in the directory ready for issue.
View 3 Replies View RelatedTechnique that can check the current plotter name for the current tab and assign it to a variable?  i.e. can it be assigned to a variable to check if if equals "myplotter1".  The next step  - is there a technique to change the plotter name to "myplotter2.pc3".
I have partially done the latter part of this in the past using the -plot command line to ASSIGN a  new plotter but I would really like to only run the routine if it really needs to. Â
I have 1 Next button that is used on the timeline. Each position has a pause then a play so there is only 1 button. I need to get the label info so I know where I am so I can save the location of the timeline that the user was at if they exited before they finished the process.
View 6 Replies View RelatedMY QUESTION : MAYA or 3D MAX or BOTH?
I've been playing around with digital film with chromakey lighting and Adobe After FX post production & compositery techniques.
I now what to continue to develope this stylisation with big 3D digital sequences.I'm in at the deep end but a fast learner..I've got a great TRON scenes tutorial kit which uses MAYA and I've got some great 3D models (landscapes, trees, vehicles etc) but they only seem compatible with 3D Max, not Maya...
What are the main objectives of each suite MAYA and MAX 3D? For example why is my TRON template kit MAYA based, not MAX 3D.How do i make my files universal... for example I require a dragon, what model / file format is compatible for both packages?
I've also seen nice animation results with Blender 2.57... Are these file formats compatible with Maya and 3D Max.
I want to create a file with image sequences; not a video file, a long png file. Example: I have 10 jpeg or bmp images, each image needs to sit at the side of the last image in a line, so instead of stacking the images one on top of the other as the Scripts > Load into a stack would do, I would have 10 images side by side, abit like the three images below but butted up to each other on the right-hand side. Is it possible to automate this task?Is there a script already made for this?
View 3 Replies View RelatedCalling all RED users (and not RED users as well). I have just posted a new 2 part series on dealing with upscaling RED sequences in Autodesk Smoke
This user requested topic shows how you can achieve the workflow of doing your editorial and basic effects with a small debayer setting followed by unlinking the sequence, upscaling the debayering settings and relinking everything together at the higher debayer setting. We also cover the affects of ConnectFX created before or after upscaling a sequence.
As I said, "Debayering Fun for Everyone!"You can check this out now on the Smoke Learning Channel. URL....iTunes - Do a search for the Smoke Learning Channel.
I've downloaded the trial of Photoshop CS6, and imported image sequences and video files. But whenever I use a filter or make another edit, it only affects the frame currently being displayed. Is there any way to apply a change to all frames of the sequence or video at once?
View 3 Replies View RelatedI have used VideoStudio 11 happily for some time now but when I recently captured a HDV video in the DV format I found that the audio in some of the sequences plays back normally BUT some does not play back at all or only at a very very low level. The audio on the original tape is fine and I can see the audio waveform on the sequences that don't play back.
View 1 Replies View Related