I was doing some multicam editing a week ago in Premiere CC, and it worked great. But today, pressing the number keys during playback doesn't do anything. I can still make cuts by clicking on the thumbnails in the Multicam Monitor, but I can't figure out why they keys aren't working.
View 2 Repliesi have been working on a pretty long multicam project (About 1h45m) in Premiere Pro CC.I was all done, and during export in Media Encoder i noticed that after about 45m of rendering, the preview window was still showing the beginning of the video. Upon further inspection, i noticed that the video appeared to be Looping. Sencing that something was wrong, i cancelled my render and reopened my project.
when the project reopened i could see that after a couple of edits, there were little white triangles and the top of the clips. I need to stress that before i started rendering, these triangles where not there.
And yes, when i played through my sequence, at every edit (camera change) the multicam clip would play from the beginning again. i have tried to remove everything after where this problem occurs and then drag the footage out. It does allow me to do edits again and it works fine, but i dont really want to spend hours doing it again, not understanding what the problem is and run the risk of it messing up again.
I had a multicam clip already created and have edited it into many sequences. I loaded it into my source monitor and accidently unchecked the enable option. Now that same sequence is no longer a mutlicam clip and when I load it into the source montior, my system crashes. is there any way to make it back in to a multicam clip?
View 2 Replies View RelatedLast week, I was editing a multicam sequence (in Premiere 7.0.1) and I found it always very usefull to see the waveform. After upgrading and choosing Sequence -> Render Audio, the CTI jumps to the beginning of the timeline and starts playing and nothing more. No rendering at all.
View 14 Replies View RelatedRendering from a multicam sequence with in/out points set. Media consists of RED Epic 5K, Canon 7D, GoPro, and BWF sound. Output is for Vimeo 1080p 23.976. All cams and sound are set to 23.976.
Problem signature:
Problem Event Name: APPCRASH
Application Name: Adobe Premiere Pro.exe
Application Version: 7.2.1.4
Application Timestamp: 52aed7f3
[Code]....
When editing a multicamera sequence, I keep running into this weird phenomenon where I can't stop the playback. I hit the space bar, start making cuts, then when I want to stop I hit the space bar again and nothing happens. The sequence keeps playing, sometimes stopping after a couple a minute or so, sometimes not until the end of the sequence.
The nested multi-cam sequence has just 4 streams of DSLR video. The machine I'm using has plenty of CPU power and memory and an nVidia GPU, so I'd be surprised if resources are a problem. The source media is on a Raid-0 array.
I've tried switching the resolution to 1/4, but this makes no difference. I have several layers of audio but have solo'ed just one to see if that would work. No.
What's the best way to copy a selection, via in/out, from a multicam sequence into another sequence? After setting the in/out and then copying the selection, when I paste into another sequence, the entire sequence comes in.
View 5 Replies View RelatedI have just started using the multicam since upgrading to 7.1. Apparently I have got a 2 hour sequence with only two cameras all HDV footage. After about an hour of my live cuts, I started noticing slight freeze of about a second or so when I cut to a camera. I tried this with the mouse and the keyboard and still the same.
I am running Windows 7 Pro 64 bit,
HP XW6600
Dual Xeon 5450 @ 3Ghz
GTX 570
16GB RAM
I can see the chosen video on the right side but I cannot see the previews of the other tracks or switch from one to the other. This project was working just fine and I didn't change any settings when it decided not to work. I just hopped over to make some adjustments to another timeline and then when I jumped back over to the master with the multicam nested inside it decided to stop giving me previews and prevents me from switching camera angles.
This shows my multicam monitor:
And this shows the timeline that contains all the tracks for the multicam:
I have multicam editing enabled on the multicam sequence with the above tracks nested inside.
I installed the latest update for Premiere Pro CC a couple of days ago and now every edit I make in my Multicam sequence takes about 10 seconds to take effect. No matter how small an edit I make. While it´s taking affect the computer just freezes.
View 7 Replies View RelatedI'm new to CC's Mulicam feature, but well versed in the more limited equivalent in FCP. I was delighted with everything about it, until I began actually cutting multicam footage into my sequence.
Whenever I try and overwrite/insert/drag the multicam material into the sequence, it brings in 18 audio tracks- in spite of the fact that my multicam sequences have only 4 audio and 2 video tracks.
No amount of track deselection on the destination sequence works with this.This is going to be a real problem as I add new material into an existing a rough cut, with a 5 track temp mix. how I can specify only 1 or 2 tracks of audio?
I'm running 7.2.2, on OSX 8.5.
PS, Also unable to insert images into this post. Using Chrome Version 34.0.1847.116
I love CC's multicam feature, but keep having this problem:
In Pluraleyes, I would lay all my Cam 1 material on video track 1 (multiple clips), then Cam 2 on video track 2 (multiple clips), add my audio, and create a multicam track that kept all Cam 1 clips on track 1 and all Cam 2 clips on track 2.
in Premiere Pro CC, multicam creation can only be exectued via the browser, not the timeline. So Premiere syncs everything up and throws each clip onto the next video track up, leaving you with a mountain of timeline media that reads out tiny and jumps all over the place when viewed in the multicam monitor (see picture).
What I'm after:
- the ability to create multicam sequences based on the timeline (lay out all clips from each cam on whichever video track I want, select all, then choose "create multicam sequence") so that the end result isn't 20 video tracks I have to manually collapse into 2 (time waster).
I have downloaded a trial version of Photoshop 6 to see how it works with video editing. So far it only seems to be able to do a max of 3-3 cuts and then refuses to do any more. I need to edit a 30 min movie. I need to do hundreds. Is this a limitation of Photoshop 6 trial, Photoshop 6? Am I trying to do more than Photoshop can do? I have no problem using Avid or Corel video editing software.
View 1 Replies View RelatedI am relatively new to Premiere, having been an Avid editor for the last 20+ years. I need to add cuts to an adjustment layer that correspond to the layer below. Is there an easy way to do this? On the Avid, it is relatively simple, so I was hoping there was an equally simple way in Premiere.
View 8 Replies View RelatedHow can separate Multicam Monitor from Program Monitor? I would like to put Multicam monitor on one monitor and hte Program on another.
View 2 Replies View RelatedCreating a format to keep a number following a code.
My code is BCCD#
My format is DFL CC $+
My result now is:
Raw Desc. BCCD1 B (Bottom of Concrete Ditch)
Full Desc. DFL B CC (Ditch Flow Line and Type)
I am attempting to create a key that will create the following full description from the raw description:
Raw Desc. BCCD1 B (Bottom of Concrete Ditch)
Full Desc. DFL1 CC B (Ditch Flow Line and Type)
The reason that I need to change the description is to comply with certain standard codes from an outside entity but I do not wish to change the filed coding that we use in house. I cannot seem to find a parameter that would allow me to keep the number behind the DFL descriptor
I always used the number keys to set opacity in brush tool. Suddenly it now affects flow, not opacity. At the same time this functionality changed I started having to click on a mask for the [ ] keys to change brush size. I used to be able to change size without selecting the mask. Did I inadvertently change some setting? I am using CS5 12.0 x 64 on Mac in 10.6.8.
View 2 Replies View RelatedI'm trying to bind the number keys to specific values for opacity/transparency of brushes, so I embarked for the shortcut key editor where I found that the "set transparency" does exactly the same as "completely transparent".
Is there a way to define what value "set transparency" sets it to? what I'm trying to do even possible with GIMP?
I'm on a macbook pro and it seems that I cannot move a clip by selecting it and entering + or - and a number. This can be accomplished with a full sized keyboard by using the number pad on the right, but cannot be accomplished by using the regular laptop keyboard. Am I missing something? Is there a way to edit the keyboard shortcuts to do this?
View 2 Replies View Relatedway of making a merged copy of a number of layers?
I know the Alt/Ctrl/Shft/E shortcut, but this requires turning evertything off except the layers to be merged. In a large doc with some layers already turned off, turning everything on and off quickly is not always straight forward.
Is there a way of merging linked layers perhaps?
I am using Photoshop Elelments and Premier 9 and cannot open a number of my previous jpegs. How can I correct this?
View 6 Replies View RelatedWhen I want to make a DVD in Premiere Pro I go to File/Adobe Dynamic Link - the Send To Encore does not show up...why?
View 3 Replies View RelatedI'm using Premiere Pro CC on Windows 7. I previously was able to import and edit clips via exactly the same workflow - but now, not matter what clips I import, they all appear as the 'white screen'. The thumbnail is a frame of the video, but as soon as I mouse over, scrub, or try to play the clip, it turns totally white. Audio will play fine though.
I'm almost positive it has to do with using an AOC display that plugs in via USB. This is based on a similar issue I had using that display on a Mac and having part of a Blackmagic Design software UI not appear while using that screen.
I've tried lots of things, including updating the driver for my graphics card, from the manufacturer's site. I can try - especially a way to undo whatever was done when I plugged in that USB display (worked without manually installing any drivers).
I've just installed GIMP to see if it can replace Photoshop for me. But I experience some weird troubles. When I try to use the text tool I can't type anything because all the keys acts as shortcut keys. Aren't these supposed to be overridden when using things like the text tool? I also have the same problems with dialog boxes. The tab key is used to hide toolbars, but when I open dialog boxes I would rather want to use tab to jump from one input box to another. Plus I couldn't enter numbers because the number keys was shortcuts for zoom level.I guess I'm just doing this all wrong? I'm on OSX Maverick.
View 5 Replies View Relatedis there a way to make "hot" keys so you can get to a function with out navigating ......like flatten an image has none but hue/saturation has ctr-u
and selective color has none ...any tips tricks or insults...... just playin
i waste a lot of time navigating photoshop add those seconds up and you have another work day....
After selecting 2 (or more) files and right clicking and choosing Multi camera sequence from source, I drag the newly created sequence on to the time line but all I get is the two files on the time line stacked over one another. the sequence never gets created.
View 3 Replies View RelatedI'm splicing together a couple of avi files and outputting as a 720p .wmv. The final file is about 15 minutes long. At each of the straight cuts (I'm not using transitions) in the output file, two or three seconds are cut off! I've tried outputting in different formats and it still occurs, but if I shorten the entire file to a minute or so, it doesn't happen. I've tried it with proxy on and off. I've edited in the very same configuration very often previously and haven't had this problem before.
View 5 Replies View RelatedWhen I play the video "clip" mode, it is perfect. When I play the "project" mode, the sound cuts in and out. But not on all clips, just the .mov files. The .wav are fine. I just updated all the patches, (to my knowledge) and tried to make a new project.
I just figured out the the corel does not like .mov files. I converted to .wmw and it works.
I just installed PS CS and my short cuts dosent work??? How do i turn them on?
View 1 Replies View RelatedJust made a very cool logo for mysite but the bad part is, it is 35.9KB. This is sort of too big and will take too long to load on dialup. I was wondering, If I sliced the image up in two, will it maybe speed up the load time? Or will the slices still both be 35.9KB?
View 7 Replies View RelatedI'm a GIS tech for a nonprofit and it would be really beneficial if I could make projections of how old clear cuts could look after being tapered and so many years regrowth.
PS is a hobby of mine, but I can't really think of a way to do this outside of regular cut and paste (which looks pretty lame). So I need to be able to:
1. turn the straight clear cut lines into more natural looking tree growth patterns
2. add trees where there currently are none