I have downloaded a trial version of Photoshop 6 to see how it works with video editing. So far it only seems to be able to do a max of 3-3 cuts and then refuses to do any more. I need to edit a 30 min movie. I need to do hundreds. Is this a limitation of Photoshop 6 trial, Photoshop 6? Am I trying to do more than Photoshop can do? I have no problem using Avid or Corel video editing software.
View 1 RepliesI was doing some multicam editing a week ago in Premiere CC, and it worked great. But today, pressing the number keys during playback doesn't do anything. I can still make cuts by clicking on the thumbnails in the Multicam Monitor, but I can't figure out why they keys aren't working.
View 2 Replies View RelatedI have a video clip in VS and i wanted to cut it up every .5 seconds. How can this be done easily?
Is there a way to merger to clips so that they cut back and forth every 5 seconds?
Is it possible with X5 to rotate a video arbitrary number like 8%? I know the video can be rotated 90% but unsure about just a minor rotation. If not possible in x5 maybe in x6?
View 1 Replies View RelatedI just installed PS CS and my short cuts dosent work??? How do i turn them on?
View 1 Replies View RelatedJust made a very cool logo for mysite but the bad part is, it is 35.9KB. This is sort of too big and will take too long to load on dialup. I was wondering, If I sliced the image up in two, will it maybe speed up the load time? Or will the slices still both be 35.9KB?
View 7 Replies View RelatedI'm a GIS tech for a nonprofit and it would be really beneficial if I could make projections of how old clear cuts could look after being tapered and so many years regrowth.
PS is a hobby of mine, but I can't really think of a way to do this outside of regular cut and paste (which looks pretty lame). So I need to be able to:
1. turn the straight clear cut lines into more natural looking tree growth patterns
2. add trees where there currently are none
Why do my keyboard shortcuts work and then all of a sudden, without even closing the program they don't work?
View 1 Replies View RelatedI am trying to print a full page borderless 11" x 8.5". The long side (11") cuts off about 1/16 of an inch.
I have tried using two different printers using the same 8.5x11" glossy paper.
If it is not the printer, it must be some setting in Photoshop (CS6).
What an I missing.
When I use the keyboard short cuts to to zoom (ctrl ++ and ctrl -) they don't work. Any ideas why?
View 2 Replies View RelatedI am following a tutorial Using Layers in PSE 11. The presenter selects the Elliptical Marquee tool to edit cuts. I do not see the Elliptical Marquee tool in my PSE 11?
View 2 Replies View RelatedI'm splicing together a couple of avi files and outputting as a 720p .wmv. The final file is about 15 minutes long. At each of the straight cuts (I'm not using transitions) in the output file, two or three seconds are cut off! I've tried outputting in different formats and it still occurs, but if I shorten the entire file to a minute or so, it doesn't happen. I've tried it with proxy on and off. I've edited in the very same configuration very often previously and haven't had this problem before.
View 5 Replies View RelatedWhen I play the video "clip" mode, it is perfect. When I play the "project" mode, the sound cuts in and out. But not on all clips, just the .mov files. The .wav are fine. I just updated all the patches, (to my knowledge) and tried to make a new project.
I just figured out the the corel does not like .mov files. I converted to .wmw and it works.
I have a .wav file in my composition that I see the waveform going across the entire composition. If I grab the first 10 seconds of my composition and hit 0 on the number pad, it correctly plays the audio the entire time. When I render that composition, making sure audio is enabled, it doesn't work. The resulting .mov file plays the audio for the first 5 seconds and then just abruptly stops.
I'm using the Creative Cloud version.
I have a 3d model of a bridge and I would like to cut transverse sections at every pier but would like to get linework just at the spot to create plans and would like for it to be linked so if you update pier it will update section? Is this possible or something very close? Let me know what are the best ways to do this.
View 1 Replies View RelatedI made an assembly and added cuts on parts at the assembly level, but the part files didn't reflect these changes.
How to update those files with the new cuts?
I want to place a Skylight on a Slope Roof that will be channel vertically thru the Raked Ceiling System. I need to show this skylight on Roof and Ceiling plans. without tracing lines or using Vertical command.
View 3 Replies View RelatedWe recently upgraded from Autodesk Inventor 11 to Autodesk Inventor 13. For some reason the text box cuts off any leader I try to put over it. I thought this might be a glitch on my machine at first till I realized that it would not work on any machine in our office. I must have clicked a wrong button or something when installing Autodesk Inventor 13 because it worked perfectly fine in Autodesk Inventor 11.
View 7 Replies View RelatedI am relatively new to Premiere, having been an Avid editor for the last 20+ years. I need to add cuts to an adjustment layer that correspond to the layer below. Is there an easy way to do this? On the Avid, it is relatively simple, so I was hoping there was an equally simple way in Premiere.
View 8 Replies View RelatedHow to “synchronize” the ‘layout number” with “sheet number”?
As in most cases, the arrangements of “lay outs” reflects the way they are regularly printed, then how could we renumbering the sheets such that the first lay out takes number 1, the second lay out takes number 2,…and so forth.
For example, in the screenshot below, the
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I made a part in sheet metal and used the Cut tool for cut-outs...i tried by using flatten Patern,draw sketch but this did not cut part...is there a more better way of making these cuts?
INV 2013
I am working on a project where several holes in a sheet metal part will need to be cut as "knockouts". In previous years, either an engineer or the laser cutter programmer would set up the machine to partially cut a circle, but leave a gap to hold the knockout in place (basically a 340 degree arc).
Now that we are using Inventor, is there a way that we can create these features so that they show up in a dwg as a single line? It must be a single line; some of the holes are very small and if the laser makes more than one pass it could affect the integrity of the feature.
The closest I have gotten to accomplishing this is a surface extrusion on the folded part. When I send it to an .idw file, the line appears in the folded model, but I need it to appear in the flat pattern.
I have recently drawn a steel construction, and I am now in the process of making the drawings. A problem that occurs is the length of beams used for bracing. When I click the two outer points, the lower dimension in the drawing appears. This is the length of the line between the two points. To be able to dimension properly, I have made a sketch with a straight line, which is perpendicular to one side of the beam. This has been used, with the point on the opposite side, to find the true beam length (and is showed as the upper of the two dimensions in the picture).
View 5 Replies View RelatedI am making an assembly and some components are "over-sized" and to be prepared/cut down and welded in the field.
I would still like to have an assembly file to show the desired result, but when creating a typical assembly, the over-sized parts do not look good or show a nice final assembly.
What would be the best practice to show a visually appealing final assembly, but not have any effect on the individual part and drawing files?
Only thing I can think of it is to use Model features in the assembly environment.
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
I have a back plate made out of 2mm Galvanized Steel. And here is the drawing of this back plate flattened out:
You can see that the cut is 5mm between the back plate and bended out part. This part will be laser cut, instead of being punched out.
Here comes the challenge- No matter what is the distance between bended out part and back plate laser will consider there to be two lines for it to cut *one line on the back plate and one line for bended part. And laser will go there two times even if I will make distance of 0,01mm. Is there any way to make this cut as one line, so laser will make one pass cut?
How can You align section cuts to a wall or whatever if it has already been replaced?
View 1 Replies View RelatedI have two simple parts: an (almost) rectangular prism and a simple polygonal extrusion. The polygonal extrusion needs to be situated inside the prism, so I placed them in an assembly constrained the polygonal extrusion made a sketch on the extrusion with a simple 1/8 outward Offset of the profiledid a Model > Modify Assembly > Extrude using the profile and Through All selected removed the polygonal extrusion as a participant to get the desired effect (in the photo, the offset is enlarged for clarity):
This works perfectly at the assembly level. However, I would also like this cut to be propagated to the rectangular part itself (the part through which the cut passes). When I open the part file, I still see the original part without the cut. Is there a way I can cut the part itself without recreating the shape in the part to be cut?
I've tried using Model > Create > Derive with the intention of using Model > Modify > Combine with an operation mode of Cut, but when I Derive the part, it is placed in the wrong location:
We use this function constantly for A1 drawings. It is such a great feature since 2010.
But I get errors with A3 and A4 plans that cut off the top and bottom or even sometimes the left and right hand sides.
I have set it to ISO Full Bleed, but still I don't know how to get it to print.
I am using our standard title blocks which print correctly to paper and to third party PDF creators.
How to wrestle with this command to get it to print with bigger margins?
I've been having a recurring problem with Paint Shop Pro X3. When I try to paste a selection into an existing image, it cuts off the bottom 5-10 pixels. I hover over the existing image with my selection, and the entire selection shows up -- I move it into place, and once I paste it on, it cuts it off -- here is a screen shot -- left side shows full image when still 'selected' -- once I right click it cuts off a part of the bottom portion.
This is a piece of another image being pasted into a blank, new image. They are sized the same height (though that doesn't matter) and after paste, chop chop.
I have a curved solid with a pattern subtracted from it in a model representing a sheet of mdf . is there a way to flatten the surface of the solid to get the geomerty of the cuts. I supose is same as matrial map.
View 1 Replies View RelatedHow can I detect sheet metal cut and extrusion cut features that have the white circular model browser node icon wih the "i" insided it (toolip says "No effect?") via the Inventor API? You get this situation if the sketch does not cut any geometry. I want to delete these features.
I'm using Inventor 2012 and VB.Net.
i7-2720QM Dell Precision M6600, Win 7 Pro 64-bit, 8GB RAM
Autodesk Product Design Suite Ultimate 2013
Autodesk Vault Professional 2013