AutoCAD Inventor :: Assembly To Show Field Cuts?
May 13, 2013
I am making an assembly and some components are "over-sized" and to be prepared/cut down and welded in the field.
I would still like to have an assembly file to show the desired result, but when creating a typical assembly, the over-sized parts do not look good or show a nice final assembly.
What would be the best practice to show a visually appealing final assembly, but not have any effect on the individual part and drawing files?
Only thing I can think of it is to use Model features in the assembly environment.
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
View 9 Replies
ADVERTISEMENT
Dec 4, 2012
I made an assembly and added cuts on parts at the assembly level, but the part files didn't reflect these changes.
How to update those files with the new cuts?
View 2 Replies
View Related
Feb 14, 2013
I have a sub assembly that I am making a drawing of. The assembly drawing needs to also display the main assembly as a reference part (in phantom lines). The sub assembly is made up of flexible hoses that need their connection points referenced.
Inserting the main assembly into the drawing, so that I can see both the main assembly and the sub assembly together, messes up the parts list and balloons.
There must be a way to dislay the sub assembly in the main assembly and still have the part list and ballons reference the sub assembly?
View 1 Replies
View Related
Oct 7, 2009
Sometimes I turn various parts (visibility) off in an assembly. If I want to turn them all on again without doing it one at a time or selecting them all individually, I find IV turns everything OFF first, then I have to reselect them all again and turn evrything on. Can it be done in one step instead of two? IV2008SP1
View 9 Replies
View Related
Nov 16, 2011
I am having a bit of trouble with my "Parts List". What I want to be able to do is show the top level assembly quantity in my part drawing. From our fabricators point of view it would be eisier if they could open/pick up a part drawing and see the total quantity needed to be produced before looking at any assembly drawings. So they could produce all individual parts then grab what they need to produce sub-assemblies. I would like to do the same for my subassembly "Part list" where I would show the total need to produce my final assembly.
So far I can only show my quantity as 1 in the parts list for a single part or subassembly, or use a static value and add the quantity by hand which can change through our design/re-design process, not to mention be extremely time consuming.
View 6 Replies
View Related
Apr 5, 2013
What's the purpose of making modeling edits at the assembly level if those edits don't show up in a drawing of the parts? Sure, it makes the assembly look prettier and more true to the final product, but say I make a bunch of cuts, holes, etc. at the assembly level, but then I make a drawing for one of the parts that was affected... those edits don't show up on the part itself, so all those edits are of absolutely no use to me when I need to give the guys in the shop a detail drawing of how to make the part. Why I would make edits at the assembly level?
View 9 Replies
View Related
Nov 12, 2013
I am working in one assembly. in that assembly i created all the part with using i part & same part i called in to the assembly & created i assembly. while creating drawing i have facing problem to show the model parameters in to the assembly drawing table. How to link the model parameters in assembly parameters with using i assembly.
View 1 Replies
View Related
Jul 17, 2013
I want to show one of the parts in a drawing of an assembly in hidden lines, it's a reference part only.
View 3 Replies
View Related
Oct 13, 2011
I'm referencing an assembly on a drawing. When new parts are added to this assembly, they show up on my drawing, anyway to stop this?
View 5 Replies
View Related
Aug 24, 2012
when open an assembly not all parts are shown. To be able to see entire assymbly need to change View representation to Master manually. How to achieve this in Ilogic?
View 5 Replies
View Related
Nov 8, 2013
I've got a machine designed that has a couple hundred parts - originally built as one main assembly (with a number of weldment subassmblies). The problem is that the BOM is too large to feasibly have on the drawing and still show assembly detail. I'm trying to avoid a multi-sheet configuration.
So I've grouped certain items and demoted into subassemblies. The problem is that all the subassemblies are attached to a main frame- and I'd like to show this frame in each of the subassemblies as a reference. Is there a way to add a "phantom" copy of the framework to each of the subassemblies to that it can be seen? (and the assembler can see how the subassembly is mounted on the frame) Otherwise all these parts are just floating in space on the subassembly (and constraints are lost on the subs).
I'd like to keep the frame on the top assembly, as it may be customized for future machines, while using the same subassemblies.
2014 Product Design Suite
W7Pro-64
Intel Xeon E5-1620 @ 3.60 GHz 16GB RAM
Dual 1GB NVIDIA Quadro K600 graphics
View 9 Replies
View Related
Dec 8, 2011
I have a sketch on a component. That component is being used in an assembly. The assembly drawing (.idw) does not show the sketch on that component. I have made them visible on the component, but don't want it visible on the assembly model. (only the assembly drawing)
View 1 Replies
View Related
Oct 20, 2011
We have a data folder on the server mapped as network drive to the clients. The data folder contains all cad data stored from productstream professional.
Due to an over 10 year old environment the data folder contains a huge amount of cad files, library parts, iParts and so on.
Due to historical growth of the environment there are some missing parts (not available on the file system anymore), because they were deleted, are corrupt, and so on. At the root of the data folder there is located the typical cmpinv11.ipj inventor project file.
If you open an assembly either from productstream or via inventor (without productstream) directly from the data folder and the assembly has an unresolved child component because the file isn't there anymore it takes a very very long time until the dialog box for unresolved link comes up (waiting time several minutes 1...10min). Once reached this point one can skip and repair the assembly, of course.
But the question is, how to speed up the time for getting the unresolved link dialog?
The network connection itself is quite OK und the project file itself is also OK. The project file list of every user is pretty small (only cmpinv11.ipj and some standard ipj's).
We think inventor internally scans the whole project-file folders to ensure that the component is really missing but due to the huge environment this takes many minutes and is annoying.
Any bypass for that? Is it possible to apply a temporär setting before opening a potential inconsistent assembly? Or is there a setting like skip unresolved components by default or by a defined timeout?
Because it is Inventor 2010 (Productstream PRO 210) there is no File open Option Auto-Skip unresolved components (like in 2012) but even if it was I guess it wouldn't reduce the time to get the dialog either.
View 2 Replies
View Related
Feb 21, 2011
Found a link to some code (URL...) to automatically place an Mtext field to label assemblies. It was written for C3D 2009/2010 but I can't get it to work for 2011 - any VBA gurus care to take a look to see if it will run (or not) on 2011.
View 7 Replies
View Related
Jul 21, 2011
We created a field that is grabbing an object, the property of the object is the standard scale. Fields will not show the scale, it instead shows the word custom. This appears to be a AutoDesk bug. Please see the attachment.
View 9 Replies
View Related
Mar 2, 2012
I have placed a field directly into my paper space ( not in a block ) to show the current date. This is a company requirement so when the drawing is printed, it shows the date of printing. The field just shows the date that the field was inserted and doesnt update. If i replace it, i get todays date but it stays on the date.
How to get this to always show the current date?
View 9 Replies
View Related
Dec 21, 2013
I want to do something a little different in my math class unit on volume - I want to bring up AutoCAD 2014, and have a 3D solid on the screen. As I change/edit the object, I want the students to see the volume amount change, onscreen. Is there a way I can put in a field, preferably, that with a quick regen will show the volume of a 3D object?
View 3 Replies
View Related
Nov 21, 2012
I have a dynamic steel section block with a btable to choose which size member you want. What I want to know is there any way I can add a field to the block that shows the selected size so that I don't need to add a separate call up. The field would be linked to the block so if I was to change the size of the member, the field would update and no risk of someone not updating the call up by mistake.
View 3 Replies
View Related
Jul 15, 2013
Basically we set up our file names with a # and the title of the drawing. I want to create a field that only shows the number thats in the file name.
Example:
if the filename is "10101template.dwg", i only want the 10101 to show up in my field.
is there a diesel expression or something along those lines that would chose only the first 5 characters in the file name? (our job numbers are 5 #'s long and are the beginning portion of the filename).
if not, is there an expression that would show all numbers in the file name?
I realize there are a few simliar posts, but I haven't found exactly what i am trying to do, but if i do find a solution elsewhere, i will post it here.
View 1 Replies
View Related
Dec 11, 2013
I am a little new to assigning attributes. My company had a block with two attributes that I need to alter. When the block is inserted, it asks a quantity. The other attribute is titled location. I am told if needed, all these quantities can be totaled per drawing. It has a title of "location". Two things: How to replicate this action? And is there a way to show all properties of a field for an attribute?
View 2 Replies
View Related
Jul 16, 2013
I have a dynamic block.
It has length and width stretch actions activated by grips. (Works fine).
It has an attribute for the user to type in a height value. (attribute insert box appears on block insert and when double clicking block).
It has Mtext "worktop [field] High" the [field] is looking at the attribute value so in theory should return the value the user types. But no only ---- shows. regen/regenall/battman fieldeval 31
Am I missing something i have pointed the field to tag/prompt as test and they show up in the mtext.
View 5 Replies
View Related
Sep 13, 2012
We recently upgraded from Autodesk Inventor 11 to Autodesk Inventor 13. For some reason the text box cuts off any leader I try to put over it. I thought this might be a glitch on my machine at first till I realized that it would not work on any machine in our office. I must have clicked a wrong button or something when installing Autodesk Inventor 13 because it worked perfectly fine in Autodesk Inventor 11.
View 7 Replies
View Related
Sep 3, 2013
I made a part in sheet metal and used the Cut tool for cut-outs...i tried by using flatten Patern,draw sketch but this did not cut part...is there a more better way of making these cuts?
INV 2013
View 2 Replies
View Related
Jan 8, 2014
I am working on a project where several holes in a sheet metal part will need to be cut as "knockouts". In previous years, either an engineer or the laser cutter programmer would set up the machine to partially cut a circle, but leave a gap to hold the knockout in place (basically a 340 degree arc).
Now that we are using Inventor, is there a way that we can create these features so that they show up in a dwg as a single line? It must be a single line; some of the holes are very small and if the laser makes more than one pass it could affect the integrity of the feature.
The closest I have gotten to accomplishing this is a surface extrusion on the folded part. When I send it to an .idw file, the line appears in the folded model, but I need it to appear in the flat pattern.
View 9 Replies
View Related
Sep 20, 2013
I have recently drawn a steel construction, and I am now in the process of making the drawings. A problem that occurs is the length of beams used for bracing. When I click the two outer points, the lower dimension in the drawing appears. This is the length of the line between the two points. To be able to dimension properly, I have made a sketch with a straight line, which is perpendicular to one side of the beam. This has been used, with the point on the opposite side, to find the true beam length (and is showed as the upper of the two dimensions in the picture).
View 5 Replies
View Related
Dec 4, 2013
I have a back plate made out of 2mm Galvanized Steel. And here is the drawing of this back plate flattened out:
You can see that the cut is 5mm between the back plate and bended out part. This part will be laser cut, instead of being punched out.
Here comes the challenge- No matter what is the distance between bended out part and back plate laser will consider there to be two lines for it to cut *one line on the back plate and one line for bended part. And laser will go there two times even if I will make distance of 0,01mm. Is there any way to make this cut as one line, so laser will make one pass cut?
View 9 Replies
View Related
Feb 5, 2012
I have two simple parts: an (almost) rectangular prism and a simple polygonal extrusion. The polygonal extrusion needs to be situated inside the prism, so I placed them in an assembly constrained the polygonal extrusion made a sketch on the extrusion with a simple 1/8 outward Offset of the profiledid a Model > Modify Assembly > Extrude using the profile and Through All selected removed the polygonal extrusion as a participant to get the desired effect (in the photo, the offset is enlarged for clarity):
This works perfectly at the assembly level. However, I would also like this cut to be propagated to the rectangular part itself (the part through which the cut passes). When I open the part file, I still see the original part without the cut. Is there a way I can cut the part itself without recreating the shape in the part to be cut?
I've tried using Model > Create > Derive with the intention of using Model > Modify > Combine with an operation mode of Cut, but when I Derive the part, it is placed in the wrong location:
View 3 Replies
View Related
Mar 14, 2013
How can I detect sheet metal cut and extrusion cut features that have the white circular model browser node icon wih the "i" insided it (toolip says "No effect?") via the Inventor API? You get this situation if the sketch does not cut any geometry. I want to delete these features.
I'm using Inventor 2012 and VB.Net.
i7-2720QM Dell Precision M6600, Win 7 Pro 64-bit, 8GB RAM
Autodesk Product Design Suite Ultimate 2013
Autodesk Vault Professional 2013
View 1 Replies
View Related
Jun 6, 2012
I am using INV 2012 and I wan to to know a trick how to convert the weldment assembly back to regular assembly template.
View 1 Replies
View Related
Jul 10, 2012
I'm looking for the best way to create a separate assembly out of various component parts in an existing assembly so that the whole thing can be placed in an assembly as you would a part, I know it's possible to demote components within an assembly but are there any other methods similar / better ?
View 2 Replies
View Related
Sep 18, 2012
We have an iLogic assembly with to parts in it. Maybe to cylindrical parts. The iLogic rules should do the following.
1. Start a Rule after open document.
2. This Rule starts a Rule in the first cylindrical component.
3. This Rule ask the user for a diameter.
4. The assembly gives this new parameter value to the second component
5. Then the assembly calls another rule in the second component to change it with the new parameter
Everything is working fine when the following combinations are taking place:
1. I open up the assembly out of vault or from a local drive or an accessible server drive
2. I insert the assembly as sub assembly in another assembly from a local drive or an accessible server drive
It don't work with the following situation:
- I insert the assembly as sub assembly in another assembly out of vault
Then the user becomes the dialog "Choose a diameter" twice.
I don't know why, but I have the idea it has something to do with the functionality of inventor to insert a component more than once. If you insert a component in an assembly Inventor gives you the opportunity to add more than one occurence after each other.
change that behaviour? Maybe a switch to change that inventor "add more than one occurence" behaviour.
View 1 Replies
View Related
