I installed the latest update for Premiere Pro CC a couple of days ago and now every edit I make in my Multicam sequence takes about 10 seconds to take effect. No matter how small an edit I make. While it´s taking affect the computer just freezes.
View 7 Repliesi have been working on a pretty long multicam project (About 1h45m) in Premiere Pro CC.I was all done, and during export in Media Encoder i noticed that after about 45m of rendering, the preview window was still showing the beginning of the video. Upon further inspection, i noticed that the video appeared to be Looping. Sencing that something was wrong, i cancelled my render and reopened my project.
when the project reopened i could see that after a couple of edits, there were little white triangles and the top of the clips. I need to stress that before i started rendering, these triangles where not there.
And yes, when i played through my sequence, at every edit (camera change) the multicam clip would play from the beginning again. i have tried to remove everything after where this problem occurs and then drag the footage out. It does allow me to do edits again and it works fine, but i dont really want to spend hours doing it again, not understanding what the problem is and run the risk of it messing up again.
I'm new to CC's Mulicam feature, but well versed in the more limited equivalent in FCP. I was delighted with everything about it, until I began actually cutting multicam footage into my sequence.
Whenever I try and overwrite/insert/drag the multicam material into the sequence, it brings in 18 audio tracks- in spite of the fact that my multicam sequences have only 4 audio and 2 video tracks.
No amount of track deselection on the destination sequence works with this.This is going to be a real problem as I add new material into an existing a rough cut, with a 5 track temp mix. how I can specify only 1 or 2 tracks of audio?
I'm running 7.2.2, on OSX 8.5.
PS, Also unable to insert images into this post. Using Chrome Version 34.0.1847.116
Whenever I edit text in the pop-up dialog, there is usually an extra line inserted at the top of the text (a blank first line). I can't get rid of this extra line through the pop-up edit window, I can only delete it using the text tool directly on the page. This only started with the latest update.
View 2 Replies View RelatedI had a multicam clip already created and have edited it into many sequences. I loaded it into my source monitor and accidently unchecked the enable option. Now that same sequence is no longer a mutlicam clip and when I load it into the source montior, my system crashes. is there any way to make it back in to a multicam clip?
View 2 Replies View RelatedLast week, I was editing a multicam sequence (in Premiere 7.0.1) and I found it always very usefull to see the waveform. After upgrading and choosing Sequence -> Render Audio, the CTI jumps to the beginning of the timeline and starts playing and nothing more. No rendering at all.
View 14 Replies View RelatedRendering from a multicam sequence with in/out points set. Media consists of RED Epic 5K, Canon 7D, GoPro, and BWF sound. Output is for Vimeo 1080p 23.976. All cams and sound are set to 23.976.
Problem signature:
Problem Event Name: APPCRASH
Application Name: Adobe Premiere Pro.exe
Application Version: 7.2.1.4
Application Timestamp: 52aed7f3
[Code]....
When editing a multicamera sequence, I keep running into this weird phenomenon where I can't stop the playback. I hit the space bar, start making cuts, then when I want to stop I hit the space bar again and nothing happens. The sequence keeps playing, sometimes stopping after a couple a minute or so, sometimes not until the end of the sequence.
The nested multi-cam sequence has just 4 streams of DSLR video. The machine I'm using has plenty of CPU power and memory and an nVidia GPU, so I'd be surprised if resources are a problem. The source media is on a Raid-0 array.
I've tried switching the resolution to 1/4, but this makes no difference. I have several layers of audio but have solo'ed just one to see if that would work. No.
What's the best way to copy a selection, via in/out, from a multicam sequence into another sequence? After setting the in/out and then copying the selection, when I paste into another sequence, the entire sequence comes in.
View 5 Replies View RelatedI have just started using the multicam since upgrading to 7.1. Apparently I have got a 2 hour sequence with only two cameras all HDV footage. After about an hour of my live cuts, I started noticing slight freeze of about a second or so when I cut to a camera. I tried this with the mouse and the keyboard and still the same.
I am running Windows 7 Pro 64 bit,
HP XW6600
Dual Xeon 5450 @ 3Ghz
GTX 570
16GB RAM
I can see the chosen video on the right side but I cannot see the previews of the other tracks or switch from one to the other. This project was working just fine and I didn't change any settings when it decided not to work. I just hopped over to make some adjustments to another timeline and then when I jumped back over to the master with the multicam nested inside it decided to stop giving me previews and prevents me from switching camera angles.
This shows my multicam monitor:
And this shows the timeline that contains all the tracks for the multicam:
I have multicam editing enabled on the multicam sequence with the above tracks nested inside.
I was doing some multicam editing a week ago in Premiere CC, and it worked great. But today, pressing the number keys during playback doesn't do anything. I can still make cuts by clicking on the thumbnails in the Multicam Monitor, but I can't figure out why they keys aren't working.
View 2 Replies View RelatedI love CC's multicam feature, but keep having this problem:
In Pluraleyes, I would lay all my Cam 1 material on video track 1 (multiple clips), then Cam 2 on video track 2 (multiple clips), add my audio, and create a multicam track that kept all Cam 1 clips on track 1 and all Cam 2 clips on track 2.
in Premiere Pro CC, multicam creation can only be exectued via the browser, not the timeline. So Premiere syncs everything up and throws each clip onto the next video track up, leaving you with a mountain of timeline media that reads out tiny and jumps all over the place when viewed in the multicam monitor (see picture).
What I'm after:
- the ability to create multicam sequences based on the timeline (lay out all clips from each cam on whichever video track I want, select all, then choose "create multicam sequence") so that the end result isn't 20 video tracks I have to manually collapse into 2 (time waster).
I had an alert to update Photoshop but after three attempts it reaches 56% then fails. It is accompanied by a message to contact customer care and gives the number: U44MIP34. I have retried after a restart but with same result. Then I tried again after running AVG registry cleaner equally without success. Could it be a time difference between US and UK?
View 1 Replies View RelatedI get an error message after downloading and trying to install that lightroom cannot locate the lightroom-64.msi file due to the network.
View 1 Replies View RelatedI have Windows 7-64 and I can not install the latest update 13.0.2 for Adobe CS6 (Swedish)! How to fix it?
View 7 Replies View RelatedI applied the lateset automatic update to Photoshop CS6 (the one that adds Retina display support) and it's corrupted the Photoshop icon (Mac OS X).
Here's a composite screenshot showing the icon in the Dock, the small icon in the Finder's Column View, and the large icon in the Finder doesn't display at all, and is replaced with a generic icon. They all exhibit a different type of visual corruption.
Since the latest update earlier this week, I've experienced major issues with the character palette - particularly the point size and tracking. The tracking issue is by far the greater of these two evils and the following explains the issues I've observed:
tracking - the number you type isn't the number used to set the tracking. The slider and up/down arrows do not remedy this problem, though they make it slightly more predictable. The number that appears seems random, though I've noticed a pattern in some instances (typing 20 sets tracking 18, typing 40 sets it 36, typing 60 sets it 54, and so on). This issue also appears to be connected to free transforming a text layer, so the pattern is possibly based on the percentage of scaling.
font size - the number you type works if size is increased in small increments to a certain point. Then it max's out, and this error appears repeatedly (after ok is clicked the error pops back up)
I've searched the web for resolutions to the issue and haven't found anything. This is what I've tried and none of it worked to any lasting degree:
- set units to pixels in preferences and restart photoshop
- set units back to points in preferences and restart photoshop
- restart photoshop and pc (several times)
- shut down photoshop and pc (several times)
- unplug pc and discharge static
I am not able to update photoshop CS6 to the latest version. I have this problem on two computers. I get an error message which refers me to a file in the ../common filesadobeinstaller directory, but the file is not readable (gz). I have repeatedly tried to install the update. I have de-installed the program and re-installed it, but am still unable to apply the update.
View 2 Replies View RelatedAgainst my better judgment I let the latest update install on Video Studio Pro X3 (now at 13.6.2.69) and now all my videos are skipping. This is happening in the time-line with camcorder and other source videos, and worse, when produced as output videos from VS is then in those permanently. The source videos are fine because I checked in Media Player. VS produced videos played in Media Player show the skipping - ugh. Prior to the upgrade everything was perfect. how do i downgrade?
View 6 Replies View Relatedunable to open Ai CC after latest update bcuz missing pdf plugin.
View 1 Replies View RelatedUnable to use Photomerge in Photoshop CC latest update 14.1.2x64. IU get the following error message
View 6 Replies View RelatedI am using a Mac retina display with OSX version 10.8.5. It has an internal flash/solid state drive. I am a member of Adobe CC. Since I installed the latest Photoshop update (14.1.2, x64), my Photoshop crashes when I try to save (command+S) a .psd file.
View 2 Replies View RelatedWhy does Lightroom not "see" the photos from my catalog since the latest update? Ever since the latest update it says file not found but I can open and work on the photos in other programs. How do I get the prgoram to "see" my photos again?
View 7 Replies View RelatedI have Creative Cloud subscription and Photoshop 3D Extrusion used to work fine (though slow).
After latest update several days ago it stopped working, displaying an error message instead:
"The 3D features require that 'Use Graphics Processor' is enabled in the Performance preferences. Your video card must meet the minimum requirements and you may need to check that your driver is working correctly"
The Graphic Processor is enabled, and the driver is working fine.
Is this a bug or a "feature" in new version? How to make it work as before the update?
After installing the latest fix/update/patch Paintshop Ultimate X6 crashes continuously. After startup it goes for a minute or so and then crashes. I have uninstalled and reinstalled it without any change. I've emptied the temp directory.
View 4 Replies View RelatedHow can separate Multicam Monitor from Program Monitor? I would like to put Multicam monitor on one monitor and hte Program on another.
View 2 Replies View RelatedI'm having a major issue here, I use custom colors (created in my custom palette), X^ used to hold it very nicely, even in PDF exports etc.
Now - with the latest update, X6 "forgets" the custom colors, it resets it to default color, I have to manually set every object to the custom color all over again.
my LR has all of a sudden started to show an unacceptable lag between making any sort of adjustment and the screen image updating. System info below -
Operating System
MS Windows 7 64-bit SP1
CPU
Intel Core i5 2500K @ 3.30GHz
Sandy Bridge 32nm Technology
[code]...
I just got Maya 2012 student edition. I created a quick rig with the default maya settings (Skeleton gen, Characterization tool, Character controls).
The position of the rig doesn't update until I let go of the controls. On other rigs the rig updates real time.
Just as the headline says. I shot a wedding and accidently forgot to change the frame rate (Sony AVCHD, if it matters). I need the clip to get to 24fps without using slow motion (I need it to look real time) and I need the audio from the clip as well. So, clearly going to Interpret Footage>Frame Rate won't work because the audio and film slow down. Even unganging it as instructed by Adobe in the manual doesn't work quite right.
View 1 Replies View Related