my LR has all of a sudden started to show an unacceptable lag between making any sort of adjustment and the screen image updating. System info below -
Operating System
MS Windows 7 64-bit SP1
CPU
Intel Core i5 2500K @ 3.30GHz
Sandy Bridge 32nm Technology
[code]...
I'm having a serious problem with the thumbnails in Library/Grid mode taking anywhere from 5-10 seconds to "pop in" the adjustments I've made in develop and/or via the quick develop tab. I need to quickly see if large batches of images are similar in color/exposure, and I've always used the Grid to compare them in bulk. Now it seems the previews refuse to update unless I hover over that image for an extended period of time. I've even tried jumping back and forth between Develop (in order to update the preview) and Library, but 8 times out of 10 it reverts to the old preview. I have tried:
1) Clearing my cache
2) Expanding the cache size from 3 GB to 10 GB to 40 GB with no avail
3) Optimizing the catalog
4) Updating Lightroom & Camera Raw
5) Removing Luminance/Sharpen adjustments from all the images
6) Reducing Preview size/quality
7) Using Smart Previews
Because of the sheer numbe of images I work with, I have to store them on an external drive, not my Mac (3.06 GHz Intel Core i3 and 16 GB DDR3 memory). Even when I edit images locally on the machine, I have this problem. All of my software and drives are up to date, and I've got around 90 GB free on my system. making my adjustments on faith and then "re-updating" the previews...but deleting the Smart Previews/Previews and recreating them doesn't seem to fix the problem.
Looking forward to this update because i use a Fuji X pro 1 and I had read that lightroom 4.4 now supports this camera and sensor.
However after updating all I get in the Lens adjustment under Fuji is the Fuji x100 which has been their for some time.The exif info is showing the correct camera and lens used etc.
I have tried uninstalling and then manually removing any left over files and folders with no luck.
Do i have to install support for this camera as an addon?
Also if i look in the lightroom folder Camera profiles/camera it only lists Canon, Nikon and Sony
I'm using LR 4.3 on Windows 7, 64-bit. It seems to work pretty well in Library and Develop and such, so I don't think there's a performance issue...
When I do a synchronize on a folder (may be 500 files or as few as 20), new files don't show up to be imported. I can look at the folder and SEE the file. It's there. But, it's NOT in the library grid. Synchronize does NOT see the file. If I do an import (separate from Synchronize), the file usually shows up. The file I can't see in the library shows up in the list with a checkmark, so it KNOWS it's not been imported. At that point, I can go ahead and tell LR to add them and it's fine.
ALSO, when I add a keyword to a new file, it doesn't show up when I open the files for that keyword. For example, I take a .dng file edit it, then finish in Photoshop. Saving the file in Photoshop gets it back to LR. I can see it in the files in Develop. I can see it in the Library grid. But it ISN'T in the keyword set. Even if I ADD the keyword AGAIN, it STILL doesn't show up in the files for that keyword. If I shut down Lightroom and restart it, THEN the file shows up in the keyword set. Is there some "auto-update" setting I've messed up?
I just installed Lightroom 4 and am trying to use the maps feature, but panning and zooming it is so slow that it is nearly unusable. I never had perf problems with LR3, and I've got a decent machine:
Windows 7 x64
4-core 2.8 Ghz CPU
8 GB RAM
NVidia GeForce GT 440
Using Google Maps on the web is as snappy as expected. Would installing Google Earth worth?
We have a bunch of shots taken using natural light - the shots all have completely different exposure and white balance adjustments.
Now that the shots feel like they've been shot at the same time of day (and on the same day) we'd like to start adjusting the white balance accross multiple shots - but use the current white balance/exposure from each individual shot as the starting point - not reset the adjustments.
Kind of like baking the current settings or making adjustments on top of current adjustments - or make new adjustments relative to the current adjustments.
I just got Maya 2012 student edition. I created a quick rig with the default maya settings (Skeleton gen, Characterization tool, Character controls).
The position of the rig doesn't update until I let go of the controls. On other rigs the rig updates real time.
I have 2000 objects in my drawing and they all have outline pen widths that are abnormally thick, say 5000 mm. I'm using that method to export additional info with the AI file. Of course, I use Simple Wireframe view model.
Whenever I change an object, X5 takes about 90% CPU for about 8 seconds,and during that time I can't do anything else with Corel Draw.
I suppose it is drawing somewhere and thick lines take too much time.If I change all the objects to Hairline, or I enable Manual refresh, things work smoothly.
Is there anything I could do to prevent X5 from drawing all objects somewhere? I've tried disabling Use Off-screen image, but that doesn't work.
I thought it was Windows Aero, creating taskbar thumbnails, but I suppose that happens only when the thumbnail is actually visible on-screen.
BTW, Corel 11 and Corel 7 don't care about pen thickness...
I installed the latest update for Premiere Pro CC a couple of days ago and now every edit I make in my Multicam sequence takes about 10 seconds to take effect. No matter how small an edit I make. While it´s taking affect the computer just freezes.
View 7 Replies View RelatedLightroom adjustments that I make to an image are not being carried over when I "Edit in Photoshop CS6". I'm using LR 4.1 and ARC 7.1.
View 5 Replies View RelatedI don´t know why, but suddenly there seems to be no way, I can get edit in PS with LR adjustments. There used to be an options box in LR when selecting "edit in Photoshop". Now I get no options, and my adjustments from LR does not show in PS. I have tried both the tiff and PSD setting in preferences/external editing, but no luck. I have also used the "Reset Warnings" in LR, hoping this would bring back the external edit dialog box, but no luck.
as I have a lot of urgent work to do, and I go back and forth between LR and PS a lot.
Mac OS 10.8.5
Photoshop CS6 13.0.5 x64
Camera Raw 8.2.094
Lightroom 5.2
I have recently opened a LR catalog from an external hard drive connected to a new mac pro. All the 'user templates' are there and all the images in each respective collection, although I had to re-connect them as the originals had moved to a new external hard drive but... most (not all), but most of the images I had adjusted in 'Develop' have gone. Most of the images I made a virtual copy of before adjusting have reverted back to the original raw image without the adjustments.
If I have to start all over again from scratch or is there a magic 'LR Develop adjustments' file I haven't transfere to the new laptop and hard drive?
Are the modifications that you make during development added consecutively as you make each one or are they all added up and applied once at the end?
In other words: say I have a RAW file, well exposed, but it's flat and boring. So I choose to knock the whole thing down 1 eV in exposure. Then I use the adjustment brush and add 1 eV to just my subject. Is my subject essentially untouched as to exposure, or has the subject been brought down and taken back up and thus would have some inherent noise and whatnot?
And does the same apply for adjustments other than exposure, like clarity or tint?
I am using LR4 and PS-CS5. I just upgraded to LR-4 but now when I select an image to edit in PS, the LR adjustments have been stripped. I have looked at preferences and menu items but cannot find how I can change this.
View 3 Replies View RelatedI have reinstalled LR4.1 to the new hard drive on my computer. Had to import all the images again, and all my LR adjustments seems gone? Mapping, keywords, rating, development adjustments etc... The old catalogues are on the new hard drive. How can I get LR to find my ajustments? Or do I have to do it all over again :S ?
View 2 Replies View RelatedWhen I use send an image from LR to PS using "Edit in..." Only some of the LR adjustments show up in PS. (E.g. color adjustments are visible while crop and exposure are not). All versions (LR, PS, ACR) are the newest. I am on mac OSX 10.9.1.
View 11 Replies View RelatedI upgraded to LS4 without a hitch, and updated my catalogs. Everything seemed to work fine for a few days. Then I tried to drag my LR catalog onto another drive and open it from there. Afer that, it all went down the tubes, regardless of which copy of the catalog I open.
Normally I'll make adjustments my my imported RAW files in LR, then hit "command-E," and edit original to PS CS5.1 (all software is current release), with LR adjustments rendered to that TIFF file. Now, I don't ever get that dialog box, but I do get another box telling me to update to Camera Raw version 7.0, which I understand is not available yet. So I hit "open anyway," and the image appears in PS but without any adjustments. Furthermore, it appears to be an opened CR2 file, rather than a TIFF. I didn't even know PS could open a CR2 file without the Camera Raw plugin dialogue launching. So, it appears I have a CR2 file opened rather than a TIFF, despite the external editor presets being correct (TIFF, 16bit, etc.).
I can render it using lightroom, but that doesn't work for me because I need to be able to not save a tiff I've created (layers of different adjustment settings I discard), I need to be able to click "don't save" but that way just automatically saves them. Also,
I am running windows vista with lighroom 4.1 and CS4 11.0.2.
If I edit a photo with lighroom and send it to CS4 for final editing I am not getting any lighroom adjustments transfered with the image. I have been using lightroom 2.5 with no problems and now I have upgraded to lightroom 4 I am having problems..
I'm having a problem exporting a DNG file as an original or as DNG with adjustments. All the exports is the original DNG file. I do get a clean export with adjustments when I export to jpg.
here's the details: software is lightroom 4.1 and camera raw 7.1. File was NEF converted to DNG on import. numerous adjustment to tone, w/brushes, etc. xmp written to file. tried dng export preset as well as through the export module. exported to various versions of camera raw. all with no luck. opened in CS 5 and Preview, with the same results: no adjustments to DNG.
I have won a free high-end print and the printer says DNG will be better.
I have upgraded from LR4 to LR5, but my adjustments from developer module, stars, keywords tag etc is missing. I think I moved the catalog from 4 to 5 instead og copied
View 5 Replies View RelatedAs you can see, I am in a frantic stage. I just finished editing through close to 800 photos of a wedding that I recently shot. After I finished editing them I went to the floder location, in Windows, not Lightroom 3 (huge mistake), and I made a folder inside of that folder called "raw". I selceted all of the photos and then moved them into the that folder. So, the files were in weddings/021812/ and I put them in weddings/021812/raw/ . When I went to Lightroom, of course it said that the files were offline. Instead of finding the missing folder, I clicked "synchronize folder" and pointed towards the "raw" folder. I noticed that the images were importing without their setting and I cancelled the synchronization. I went back to windows and moved all of the photos back to their original folder and now when I try to "update folder location", the photos do not show up in Lightroom.
View 13 Replies View RelatedI would like to be able to sort a set of photos by those that have Develop Adjustments and those that do not. For now, I don't want to sort by the type of adjustment.....just whether or not an image has one.
View 3 Replies View RelatedI use [k] to get me into local adjustments, and [z] to zoom in, how I can pan around without deselecting the local adjustments (which loses which local adjustment I have selected). I tried [fn]+[arrow key] without any luck. This is very disruptive for me.
retina MBP + OS X 10.8 + LR4.1
I need to pass raw files, but I would like to apply my adjastments. Can I do it with Lightroom?
View 9 Replies View RelatedI just bought LR5 yesterday. I own Photoshop CS5. Normally I open my images in LR, make my raw adjustments and then open in CS5 for my creative editing. When I do that now from LR5, the adjustments revert back to the original settings when opened in CS5. I downloaded and installed the new Camera RAW 8.1... it didn't make a difference.
LR5 is useless to me if the adjustments don't transfer over to CS5 as I ALWAYS use finish in CS5.
I am having trouble with RAW files in Lightroom, and also camera RAW.
When I import a RAW file into Lightroom (i have the current version, 3.5) Lightroom adds adjustments to the file, for example in the basic section of the develop module exposure will be set to 0.25, recovery will be at 100, contrast 54 etc...
I have tried shooting on different cameras and I do not have the problem. I have put the same RAW files into another computer with Lightroom and it works fine. Just seems to be a wierd combination of my camera and my computer.
Everything was working fine, and I recently purchased a new camera, and still everything was fine. Then one day it started adding adjustments to the RAW image automatically. And the same when I open a file in camera RAW..
If I want to clear all History and adjustments, I know I can "Clear All" on the History but how do I clear the "Adjustments" so the little icon on the filmstrip thumbnail image (+/-) "this image has adjustments" goes away, too?
View 7 Replies View RelatedSometimes when I want to edit a LR edited photo in PS, even when I open a copy with LR adjustments, some of those settings get lost when the PS file opens, especially brush adjustments.
View 7 Replies View RelatedI transformed an image in LR 5.3 and gave it a 70s look including some adjustments with the brushes.
When I create a new preset, I cannot import the adjustments of the brushes as well.
Is possible to create a new preset that includes the adjustments of the brushes (see red areas)?
I am trying out lightroom 5 beta and the basic adjustmentsin the develop bar have disappeared (everything before the tonal curve). Am I missing something obvious here...did I hide them somehow?
View 1 Replies View RelatedI have 3 separate external HDs I use, all with the same images backed-up for safe keeping. I’ve made adjustments in Lightroom 5 to approx 200 images scattered throughout the 7000 images on 1 external HD. Is there any way I can copy and paste these changes so they are consistent on the same images on the other 2 HDs? All images are displayed in Lightroom 5.
View 14 Replies View Related