the little red X keeps popping up in the lowest far-right corner ... and it's always the warning of the dreaded malformed GUID string. There's a string of warning messages in there every time I click on the X and open it's warning-messages box.
what the heck is the Dreaded Malformed GUID String anyway? And why do I keep getting this warning?
when I upload a video to You Tube, I get a warning message that my video and audio are out of synch. Once uploaded, the video plays just fine, looks great. But I don't know why I get the warning when I upload. Video clip and audio track are the same length.
View 1 Replies View Relatedi failed to find one which would change string of a text to other for all types of objects. I mean it was usually either only multitext, or only text, dimensions or attributes.creating one which would change in abt 200 drawings:
-001
-002
-003
to:
-00001
-00002
-00003
in attributes, text, multittext, leaders, multileaders, dimensions..... at the same moment?
It is meant to be used in ScriptPro (by loading lisp in script).
If not possible, then can also open each file and run the lisp in each of them - still would save lot of time.
I'm getting this error in the middle of launching Civil 3D2014 x64 hotfix1 from the uncustomized Civil 3D 2014 Imperial icon (see command history):
Loading AEC Base...
Loading AECC Base...
Loading AECC ETransmit...
Loading AEC Base Extended...
Loading AEC Core...
Loading AEC Application...
Loading AEC Project Base...
Loading AEC Base GUI...
Loading AEC Project UI...
Loading AEC Utilities...
Loading AEC Layer Manager...
[code]....
Civil 3D appears to run o.k., no error messages upon opening a drawing...
I've been looking for a solution to remove the unit string ie Lbs, g, kg from the value given from a 'Mass' value in a text string.
As you may all know, creating text and having a 'physical property - mass' value...the unit string is there...
Lots of people on here have the problem...no-one has got a solution.
Until now...
Basically...open the part you need to get the mass property of in your text string.
Follow the instructions on this webpage...this is the first part...
[URL]
Basically, this creates a Mass property value in the parameters table that you can call on as a text parameter.
It's similar to the custom iproperty model - mass but NOT the same.
Once you have done this, you can go to the drawing of the part and create a text string in the drawing and call it up as shown in this procedure. BUT it still has the unit string.
Here's the best bit that you want to know...
To get RID of the unit string...open up the part again from the drawing...click on the parameter icon...find the user parameter...in the Nominal value column, right click on the value and you get a pop-up that gives you 3 options...
Custom Property Format, Make Multi Value & Delete Parameter.
Click on Custom Property Format.
The pop-up window comes up...showing you the property type...in my case...the 4 left columns read Text, g (grams), Format & Precision...
On the right hand side I have a Preview of the text...then 3 check boxes...Units string, Leading Zero's, Trailing Zero's.
Units string is checked.
Uncheck it.
Close it...Save your part...go back to the drawing and hey presto!...the text now shows the weight you require as a straight value...no units!
I was wondering if there is a way that AutoCad can edit one text string and the same change can affect another text string, instead of editing the same thing twice.
View 9 Replies View RelatedCan I use "edit in" in Lightroom to move video clips to premier or premier elements to edit them?
View 17 Replies View RelatedHow can I view a preview how all the video transition looks between 2 clips in Premiere Pro CS5 before I choose the one I want to use.
I always use Adobe Bridge CS5 when I need to see a fosmag on the effects in After Effects CS5, but can not get it to work and then I can also see the Video Transitions in Adobe Premiere CS5
Syncing in plural eyes is good with our pro res files, but when I try and sync with some mp3 files from a zoom h1 recorder it goes black at the bottom of the timeline and responds really buggy.
View 1 Replies View RelatedI have VSx5, and I've gotten an error message or two,telling me that my GPU unit is not up the task. This happens when I'm running a few of the more demanding things, it came up when I was using the Vitascene filter and also in Boris Graffiti. Does this mean I should get a better graphics card? I have an ASUS i5 laptop, and as far as I can tell my GPU card is the Intel HD graphics 3000.
View 7 Replies View Related 1. I'm using CS1 and have installed my printer profile. I assume this will show me what the colors will look like when I convert the photo to the printer's color space (to do this I usually choose IMAGE - MODE -CONVERT TO PROFILE
Why then when I turn on the Gamut Warning, does it show that there are colors out of gamut?
2.When I load a photo with an embedded profile and I choose the option of USE THE EMBEDDED PROFILE INSTEAD OF THE WORKING SPACE do I still need to go to PROOF SETUP and choose the printer profile to see the colors as they will look when printed? Or is this doubling-up on the conversion process.
I would have thought that choosing the printer profile to proof a photo that has already been converted to the printer color space should not show any difference. Unfortunately it does, so I'm not sure which is the accurate one.
I was creating a digital scrapbook page this morning, and as I went to save, CS6 crashed without warning (as it does 50% of the time for me when I have a project I am working on). Usually, I go to save, or open a new file to work with and the whole program just shuts off on me without a word. It is simply there one second and gone the next. If I am lucky, it has recovered something of what I have done in the past 10 minutes. HOWEVER today, it crashed, and when I opened it back up, it recovered half of what I had done and immediately crashed again, giving me this error message:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 13.0.1.0
Application Timestamp: 5022da9d
Fault Module Name: ntdll.dll
Fault Module Version: 6.1.7601.17725
Fault Module Timestamp: 4ec4aa8e
Exception Code: c0000005
Exception Offset: 0000000000027b11
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 9e05
Additional Information 2: 9e057b49cc84a2b32beb0976b9fa1666
Additional Information 3: 9357
Additional Information 4: 9357da59a0d0124ba1ff6db7da3265ac
Read our privacy statement online: [URL]
This is the first time I have had this happen with an error message. Usually it just closes up altogether and I have to reopen and redo my projects from wherever the last save point was. I have my recovery set to 10 minutes because I seem to lose my files so often when trying to save. This is getting a bit ridiculous and I did NOT have this problem even one time with the CS6 Beta.
I'm fairly new to Photoshop and I keep getting a warning box after I try to lasso a section of my picture off. The Warning says "No pixels are more than 50% selected. The selection edges will not be visable"
What does that mean and how do I fix it?
I just want to know the secret to the gamut warning. I am in a Photoshop class and we are currently doing color correction. My color corrected image looks good, but my image still has a gamut warning. I know that every image is different, but what are some of the basic things ya'll do to get rid of the gamut warning? Is there any type of conversion that you can do that'll get rid of it?
View 1 Replies View RelatedHow do we get rid of the warning message that pops up telling us that VBA is no longer installed. Since most us now are running 64 bit machines and have changed to .net programming. We do still use many Autolisp routines that work fine but give us that warning message anyway.
View 1 Replies View RelatedI get a warning when I open another max scene on another machine here at work, it says:
"The MassFX authored in this file was created with a newer version of the plugins. Forward compatibility is not supported so things might not behave properly."
I am currently using PhysX for Max version: 2.7.1.0202.1800 and PhysX System Software 9.11.0621.
Third party plugins installed for Max being used in the scene are: Rayfire 1.57.10; Orbaz Particle Flow Box #2 ver. 1.07 and #3 ver. 1.53. I've gotten this warning in scenes saved from another PC, opened in another, and not even using any PhysX or PhysX capable plugins.
I'm transferring from a high poly source model (5million polys) onto a target model that has 3 levels, no layers. At level 3 its pretty much the same polcount.
Whenever I transfer it come sup with a Transfer Detail warning saying that the target model appears to have more detail than the source and do I want to continue or swap. Surely the source model will have more detail, and I shouldn't get the warning ? I get this warning even I transfer from the source to lvl1 (much lower etc)
We are trying to run an automated process on incoming AutoCAD drawings. However, the process stops if a drawing has AEC object references, because the warning dialog opens (and the program does not deal with it). Is there a programmatic way to disable the AEC warning dialog for opening? Similar to turning off the Proxy warning? Perhaps a Registry setting?
View 7 Replies View Relatedhow to do the string art on the text.
Can I do this with PS?
I'm getting this messsage when I try to open an Illustrator file: "Acrobat PDF file format is having difficulties. Non-hex character in a string."
I', using illustrator CS6 and I need my file opened..!
with saving on Photoshop CC? Quite often it has happened to me that I will hit Command+S, but I won't see the saving bar at the bottom of the document, and if I then close the document it won't prompt me to save, but if I close the file it won't be saved.
If before I close the file I go to the File menu, the "Save" option is grayed out (as if I had just saved), but the file is not saved. If I close the file, I loose all my work
I recently opened a video in PS CS4. Ever since then I get 'pixel aspect ratio' warning and some of the images I create in PS are distorted on screen or when I tile the window and move a layer form one to the other. I can't figure out how to disable or keep this from happening.
View 2 Replies View RelatedWhenever I edit any text - be it editing an existing text layer, or with a new one, whatever text is there just randomly and without warning disappears. Doesn't matter wether I'm changing the color, font, font size or any other type settings. Sometimes I just move the mouse while in editing mode and the text just vanishes.
Made a video of the bug in action. Virtual keyboard on screen so you can see that I'm not hitting any keys to make the text disappears. Latest version of Photoshop, CC, OS X etc.
[URL]
I just installed a 2 TB hard drive and now my Photoshop 7 will not open. A warning comes up that the scratch disks are full .
View 2 Replies View RelatedImage (Line drawing). Save for Web (*gif). Receive following warning: "Some names of the files being saved will be truncated to 31 characters for compatibility with Macintosh browsers. To change your filename compatibility options, click the Optimize pop-up menu, choose Output Settings, and select Saving Files."
I could not find the Optimize pop-up menu. Therefore, I did not do this step.After save, I simply went to the appropriate folder and changed the file name to what I originally wanted (i.e., essentially correcting the truncation).
In PSP X5 I usually keep my JPEG Compression Factor set to 2. Just occasionally, I find it reverts to the default of 20 without warning. I suspect it is when I use a a Ctrl+F12 Save Copy As or when I change Image Type (JPG/TIF/PSP).
I nearly ruined some photos of my new grand-daughter.
how to disable the "You have selected more than 10 files" warning in PSP X5. It's not listed in the warning preferences and as I work with more than 10 images every day it's a total pain.
View 8 Replies View RelatedI want to know how to disable some of these pointless warning notifications. For example if I move something to a layer that is 'off' I get a notice that I am moving to a layer that is off and I then have to drag my mouse up and click 'ok'. I have been drafting for over 20 years and I know this and do not need or want this dialog Also, in the layer manager same issue, 95% of the time when I turn the active layer off I WANT to turn it off I do NOT need to waste my time telling the program, yes I want to turn it off or no I do not.
View 2 Replies View RelatedI have a few viewport on a drawing and when I hit Print I get the following warning:
" some viewports do not fit the right zoom conditions. Do you want to update them before plotting"
It then proceeds to print correct.
What is the reason for this error message and how do I get rid of it?
While opening the autocad file it is showng some warning & I dont know what is this.
View 2 Replies View RelatedI have a mass print script and I have it save then close the drawing after it's done printing each one. The problem is the script updates the mass properties and some times drawings just update when opened. So when it saves different "warnings" can pop up, which pause the script until the pop up is taken care of. The warnings are typically for saving other files like the ipt linked to a drawing or if the drawing was saved in an old version. Is there a way to just accept those while running a script so it does puase?
How I save and then close the drawing.
ThisApplication.ActiveEditDocument.Save
ThisApplication.ActiveEditDocument.Close True