Premiere Pro :: How To Set Time Duration Of A Cross Dissolve
Feb 5, 2014How to set the time duration of a cross dissolve?
View 7 Replies
ADVERTISEMENT
Premiere Pro :: Cross Dissolve Still Doesn't Fade Properly
Feb 14, 2014Cross dissolve will not fade out clips correctly. It gets down to 10-15% opacity on the last frame and that's the lowest it goes. During playback, you can see how abrupt the fade is.
Ticking the "Composite in Linear Color" sometimes improves it, but it's still not a smooth fade. Why is it that I can manually add opacity keyframes to fix this problem (regardless of "comp"), but cross dissolve cannot do a smooth fade?
The following are screenshots of the last frame before the clip ends. The cross dissolve is 30 frames long.My system is i5, 560GTX, CUDA enabled, PP CC 7.2.1, Windows 8.1.
-White background, last frame, Composite not enabled:
-White background, last frame, Composite ENABLED:
With a white background, comp enabled is a bit better, but you can still see the content. I'd expect another frame or two before a complete fade. Black background, last frame, Composite not enabled:
Again, I'd expect another frame or two before total darkness. Oddly enough, after adding and deleting opacity keyframes and switching comp on and off, I managed to get a nice smooth fade with comp OFF with the above example. Some kind of bug? Can't seem to duplicate it yet.Black background, last frame, Composite ENABLED:
With the default black background, having comp enabled makes it WORSE. This has been happening since 2011, here's a thread over on the Creative Cow forum talking about the same issue: (and I know there's threads here on the Adobe forum talking about it too)URL....
Premiere Pro :: How To Play Duration Of A Selection
Dec 26, 2013How can you see how long a selection is that you've made? For instance, if I mark the in & out, how can I see how long that selection is?
View 6 Replies View RelatedVideoStudio :: X3 - Change Duration Time To All Of Photos At Once?
Nov 10, 2010I am preparing a slideshow using photos. Is there a way to change the duration time to all of the photos at once? Say to 6 sec. I can do them one by one but I have a number of photos. I am using Video Studio X3.
View 3 Replies View RelatedPremiere Pro :: How To Avoid Or Fix Audio Clip Echo When Changing Speed / Duration
Mar 17, 2014In Adobe Premiere, I am getting an echo when I change an audio clip's speed/duration. The change is from 100% to 103%. I've tried other values in the speed duration but all create an echo.
View 1 Replies View RelatedPremiere Pro :: Cross Zoom Transition In CS6 For Mac?
Apr 4, 2014Is there a cross zoom transition in CS5 for the Mac? I would hate to have to use iMovie and transfer into Premiere to add more stuff...
View 1 Replies View RelatedPremiere Pro :: Cross-hatched Clips In Sequence Timeline?
Jun 3, 2013I see that all but the first 7 seconds of the edited clips on the timeline are now cross-hatched. There's no video or sound when I scrub over the cross-hatched portion. I've tried removing all effects and transitions but no joy. There are several other sequences in this project which are all working normally.
View 9 Replies View RelatedPremiere Pro :: Have CS6 And CC Installed At Same Time?
Feb 17, 2014I am taking editing classes at a community college, which only has CS6. I have CC at home. From all the discussions I've read about non-backward compatability (which does suck btw), I'm thinking I should also have CS6 on my computer. Found CS6 (digital and CD version) on Amazon.
View 17 Replies View RelatedPremiere Pro :: Changing Time Code In CC?
Apr 19, 2014i need to change time of a clip that strat at 00:00:00:00 to 01:00:00:00 how can i do it?
View 2 Replies View RelatedPremiere Pro :: How To Track Time Within The Clip (not Sequence)
Mar 12, 2014I watched a video clip and I liked everything from, let's say the :30 mark to the minute mark. So, I import it into Premiere. However, when I put it at the end of the next clip, it shows the time for the whole sequence. Now, I know that I can do the math, but is there a way to show where the 30 second mark (in this example) is by avoiding doing the calculation? It's do-able, but seems a little tedious. Would like to "reset the clock" so to speak when working on individual clips within the timeline.
View 2 Replies View RelatedPremiere Pro :: How To Turn Off The Time And Date Stamp
Jan 15, 2014I have done one job with new camcorder and the time and date stamp is on the video. I have looked all through the manual and I cannot find out how to turn off the time and date stamp. Do I turn off at camcorder or with Premiere Pro? I don't want it on my videos.
View 10 Replies View RelatedPremiere Pro :: Can't Change The Volume Of The Sound Over Time Within A Clip
Dec 16, 2013I want to adjust the level of the sound within a clip. I take my pen tool and just add 2 keyframes a few seconds apart from eachother. I adjust the height of the last keyframe, but when I playback NOTHING happends. This is so annoying because it has always worked. I use Premiere Pro 5.5.
View 11 Replies View RelatedPremiere Pro :: Black Borders Around Time-lapse Movie
Apr 19, 2014I made my timelapse movie in quicktime then imported it into my premiere pro cc sequence and there are black borders all around it whilst the other clips are fine and in the format i want the movie to be shown in.
View 3 Replies View RelatedPremiere Pro :: Warp Stabilizer Freezes Every Single Time - Doesn't Work
Jan 17, 2014I just downloaed the Premier Pro CC 30 day trial. I edited some nice video and was strongly considering adding this to my Photoshop/Lightroom subscription. However, warp stabilzer has not worked once for me. Even on clips as short as 6 seconds.
What happens is that when I drag "warp stabilzer" over a clip it analyzes the clip showing a blue banner stating "step 1 analyzing". Then after a short wait an orange banner appears and states "Stabilizing". Thats when the process stops. It stays locked in that orange banner stabilzing position permanently. I waited 3 hours for a 6 second clip and it still said "stabilizing".
Obviously something is drastically wrong. Had it not been for that I would have probably signed up for a subscription to Premium Pro CC.
I'm on a Windows 7 Pro, i7, 12 gigs of ram setup. Seperate scratch disk used also. Everything else on Premium Pro CC seems to work fine. I don't understand why warp stabilizer doesn't.
Premiere Pro :: Uploading Stills Giving Odd Clip Length For Time Lapse?
Apr 17, 2014I'm putting together a timelapse movie with about 6K stills. I have them gathered in groups of 600. They're all about 4 megs. I'm taking them into a sequence at 24 fps. Why is my clip coming in at about 6 sec's? Then another group of 600 stills coming in at .04 sec's?
View 7 Replies View RelatedPremiere Pro :: Turn Off Time Remapping - Original Clip Gets Grey Stripes Over It?
Mar 31, 2014I'm trying to apply the time remapping settings from my original clips to those that I've colored in DaVinci Resolve. I turned off all effects on my colored clips and graded the entire clip, not just the segment in my original timeline. My workflow thus far has been this:
1) Copy the original clip above the colored clip
2) Revert the speed of the original clip to 100 from where it was adjusted to (the speed of the original clips varies from 500% to 1000% across the timeline)
3) Turn off Time Remapping on the original clips (this is done by deleting all keyframes)
4) Find the In and Out points of the original clip through timecode
5) Set the In and Out points of the colored clip to those of the original
6) Make another copy of the original clip and set it to 100 but don't turn off time remapping
7) Copy the time remapping settings of the original clip to the colored clip
8) Convert the colored clip to the original clip's speed (usually between 500% and 1000%)
Now, in several cases this works, but in others it falls apart at Step 3. When we turn off time remapping, the original clip gets grey stripes over it in the timeline and we cannot see the footage in the Program or Source viewing monitors. We have tried reversing steps 2 and 3, but when we do that the clip gets shrunk down to 1 frame and we lose the original In and Out points.
Photoshop :: Dissolve Effect
Apr 11, 2003I am trying to do the dissolve effect in Photoshop or maybe this is not the name of the effect. I have been trying to find a shot to show as an example and can't find one exactly what I want to do but here is one that is close. Basically to the right and left of the face where the white feathering bleeds in is a dissolved bright yellow white on the cheekbones. I want to get this white dissolved look to some of my images.
View 3 Replies View RelatedPhotoshop :: White Dissolve Around Images
Jun 7, 2013The problem is that he wants the images to dissolve into the background and the person who has done is has saved them as JPEGS instead of PNG files meaning that instead of being able to dissolve into the background it dissolves into white within the image (the background isn't white!)
I've never come across this before and he hasn't got the original files. How to get rid of the white so it will dissolve into nothing or change the white into the colour i need?
Photoshop :: How To Create Dissolve Effect
Jun 14, 2007I'm after creating a series of spot/dots that gradually get smaller the further away from the center in a dissolving effect. Ideally stemming from a radial pattern if this makes sense?
View 9 Replies View RelatedAutoDesk Smoke :: Can't Dissolve Between Two Clips
Oct 25, 2011I'm trying to add a dissolve on the timeline between two clips as I have many times before and one of them will not allow me to dissolve to or from it. It won't allow any dissolves at all actually.
Both are 1920x1080 10bit clips rendered out of action. Any attempts to put a dissolve on the cut ends up with it being only on the end-tag (the second clip). If it tell it to be centered it puts a one frame dissolve on the end-tag. If i tell it Up To Cut it does nothing. From Cut works as expected.
AutoCad 2D :: Cross-section / Elevation And Detail Cross Reference Labels
Apr 6, 2011I am trying to annotate a floor plan to show the location/orientation of section, elevation and detail drawings. The labels must also indicate the appropriate drawing cross reference. (basically a circle with a arrow, text inside circle showing drawing cross reference). My question is - is there an automated way/library to insert such labels or do I have to create each of them from individual elements and make a block?
View 1 Replies View RelatedGIMP :: Dissolve Surrounded Colors Of Cropped Image With Background
Apr 17, 2013I have two layers: a background in yellow and a cropped image in the other layer. Now I want to dissolve the cropped image in the background, how can i do that automatically? I know I have the smudge tool, but the results are not so good for me...
[URL]
2.8.2
GIMP :: Dissolve Surrounded Colors Of Cropped Image With Background
Apr 17, 2013I have two layers: a background in yellow and a cropped image in the other layer. Now I want to dissolve the cropped image in the background, how can i do that automatically? I know I have the smudge tool, but the results are not so good for me...
[URL] .......
2.8.2
Lightroom :: Set Slide And Transition Duration?
Feb 20, 2012Set slide and transition duration?
View 1 Replies View RelatedPhotoshop :: How To Extend Timeline Duration To More Than 10 Seconds In CS6
Mar 29, 2013How can we extend the timeline duration to more than 10 seconds in Photoshop cs6 extended for a 3D object layer? It seems you can not make it longer than 10 seconds. Other layers can be made longer.
View 8 Replies View RelatedPhotoshop :: How To Extend Video Timeline Duration In CS6
Mar 5, 2013I’m trying to make a 3D text video intro in Photoshop CS6. It seems like the default time line is only 10 seconds long. Is there any way to extend the duration of the time line?
View 3 Replies View RelatedVideoStudio :: X3 - Changing Duration Of Clip Without Affecting Next?
Apr 3, 2013I’m using Corel VideoStudio Pro X3
I’m making a very simple movie using photos only. I need to change the play time of each photo to vary in duration. When I click on the individual photo in the Timeline view and drag it to extend or decrease the amount of time it plays for, it affects the duration of the following photo, either lengthening it or shortening it. Is there a way to adjust one photo’s duration without affecting the next in line? In other words, is there a way to fine-tune one photo, while having all others maintain their current time properties?
VideoStudio :: Pro X5 - Global Photo Duration Change?
Feb 25, 2013I have produced a movie which is a mixture of mostly still photos and some video clips all in the VS X5 Video track. Having now watched the finished movie on my TV, I now wish to extend the duration of all photos. Is there a way to globally change the duration of all photos?
View 9 Replies View RelatedVideoStudio :: Change Duration Of Multiple Images
Sep 7, 2008I have a 9 minute video of about 100 or so pictures. Each image plays about 5 seconds. I want to increase each picture to play for 7 or 8 seconds. Can I change the duration of each image without going into each image separately?
View 14 Replies View RelatedVideoStudio :: Explanation For Pause Duration Tabs
May 8, 2012I've been making great progress in learning and using videostudio... but I still can not figure out what the orange tabs are that are called "pause duration". during a clip review I can move them and nothing appears to happen... what would I use them for?
View 3 Replies View RelatedAutoDesk Smoke :: Changing Sequence Duration?
Nov 17, 2012I have a sequence that's 2 and a half minutes long, but my final edit is 2 minutes. I want to change the duration to 2:05 so I can export out various versions.
View 1 Replies View Related