Photoshop :: Void Created During Photomerge Of 8 JPG Pictures?
Sep 1, 2013
I am encountering a problem with a panoramic picture created using photomerge and 8 pictures (with photoshop cc)The result was quite good with the exception of one segment not quite properly aligned.
I managed to switch it up by a few pixels and the overall picture is almost "perfect" except that I have at one seam some empty space which I cannot fill by none of the tools like stamping, brushing, patching or even paint bucket.
Now i have a snicking suspicion that the problem lies with the layers but I cant figure out to create duplicate layers and when that can be done.
I have a web site I would like to use, purchased it from someone who assured me all that I needed to do was "tweek it" to my clients taste. I am now having difficulties trying to put my clients images into the template. The mask which is on the layer is fine, what I would really like to do is to import or whatever it takes to get my client's picture in place of the template picture. I do understand there are layers, and that I need to be on the correct layer to make the change... my problem is that all I want to do is to drop my clients picture onto the layer instead of the template picture. My alternative was to attempt to recreate all the template web site in my own layers... but, that defeats the purpose of buying the template.
I am working a little 'off piste' currently as I am usually designing buildings, however, I have been asked to design a mould for the casting of an additional mass of lead to be appended to the existing lead in the keel of a yacht.
In order to complete this exercise the volume of the mould must accommodate between 26 and 30 litres of lead which is the volume of lead required to give the correct weight.
I have begun this task by creating a new Revit Family (may have been better to create it in a Project Environment) essentially being a large extrusion, with a number of swept blend voids creating the mould cut out. I have determined this using my clients instructions for the type of cross sectional profile, its profile along its length and the footprint. Thing is I now have to work out what alterations are necessary in order to ensure that the mould volume is correct! See 3D View so far.
I am trying to create a void form in revit architecture, i am following the quick start tutorial from the design academy website and when I try to make a void form i get an error, pics to explain:
I am trying to make a void element but whatever I do this message occurs: "Some Void Forms of this family do not cut anything and will be deleted. To make a Void Form cut something else use the Cut Geometry tool." I am using "Model in place" tool -> Generic models.
When adding an element, say a door, to something like a wall, if there is a void within the door and everything is set properly to cut out a section of the wall, what is the resultant material colour that you see at the cut?
I've been trying this out and in the Realistic display mode, when I have a door with a recess profile around the frame, in brick I see the brick colour, but in plaster I see a grey which isn't the same as the default plaster colour?
What would be possible reason for a void not having any effect on cutting an object? I created a parametric void.Then I created an object.No change to the object. If I create an object then a void, it seems to work.
I am having problems with void that i cant hide in my project. The void is inside my generic family but wont apply a cut unless i apply a length parameter to it. The problem i that in my project it seems to be visible as a yellow box that will also appear when printed.
Is it possible to hide this in the project by any way?
I have inserted a recess paper towel dispenser into an interior wall. Then a 1/8" tile wall was added in front of the hosting interior wall. The opening for the recess dispenser only cut into the interior hosting wall, not the tile wall. I tried joining the two walls, but it didn't seems to have any effect. Is there any reason why the walls won't join?
I am creating a tunnel with a profile consisting of multiple radios. In the attached images can be displayed. The problem I have is that by selecting one of the two tunnels and create a void with the profile of the second tunnel and perform cutting geometry indicates that I can not and I get the error message.
If I perform the same exercise to select a tunnel and create a void with a square profile, rectangular or cylindrical deaja if I make the cut geometry. I select the void that did work and edit it to add the profile you require and at the end of the model throws me the error again.
We are working on four computers of the same features and the same version of Revit Building Design Suite 2013, has installed the update 2.
I have a complex part that will be created using additive manufacturing. Since this type of machining is adding material needed rather than removing material, I would like the make voids and hollow out the part wherever possible to reduce the manufacturing time, and the weight of the part. Are there any features in Inventor that allow you to click on an internal volume and specify a void that produces certain wall thickness? The closest feature I can think of is the Shell feature but that only works for parts with very simple geometry and it doesn't make a void like I would like. The shell feature cuts out material from the face so it is good for making something like a cup but does not make an internal void.
I have created a simple pipe fitting family, a soil vent pipe terminal infact, but I cannot get the solid body created from a rotated profile to be cut by an arrayed extrusion void. I keep getting the error message, 'Can't keep the elements joined'!
I need to resolve the corner condition where two boards intersect. I am not able to create a void in order to cut the corner for the geometry. I would like to shape more than one side of the board and make it rounded. How do I edit the different sides of the geometry?
I created a reception desk in Revit 2013 using solid extrusions and void extrusions and it looks really good. The problem is I need to recreate this thing using some other method since I cannot place door and drawer faces on a plane that technically, geometrically does not exist, ie the area a receptionist would sit. The rendering of my extruded desk is attached.
I took a series of photos (9 shot vertically) of the lobby of AKL. I made adjustments in Bridge (3.0.0.464) then choose Photomerge through tools in Bridge to process the pano in CS4 (11.0). The images were processed for the natural light. Follow the link to see what CS4 came up with. The files were .dng processed with CS3. I have made many other photomerges using this combo, but this is first to achieve this type of result. In CS4, I used the vignette and distortion options.
I'm using Photoshop on Vista 32. When I try to do a photomerge either from PS or Bridge, it does its stuff, then closes everything immediately. Reboots / changed options make no difference.
When i run a Photomerge (using jpegs) i have even tried using the sample jpegs that come with the software of the SF skyline.
I select my images, and it runs the usual sequence of starting the layers and merging then when it ends its just dissappears looking like the software has just opend with nothing happening.
Ive tried every combination to make them work and nothing. i never get to see any results.
I am using CS4, and ive also tried in CS3 again which is still installed on my partition. and its not working in that either. it used to work with no problems bit not now.
Just created a panorama out of 4 jpegs (together about 33MB) and saved it as jpeg. Now I want to create another panorama out of 10 jpegs (together about 73MB), it worked fine, but I can't save it in jpg format. CS3 only offers .psb, raw or tif.
I tried 4 times consequently to stitch 4 images in Photomerge activated from Bridge - with same settings (auto and defaults i.e. blending images on, vignette removal off, distortion correction off). I was surprised of the result because each time I tried PS generated different panorama. Just to make sure I thoroughly checked if the stitch settings were really the same - they were... Am I missing something essential?
When I click file automate - photo merge, I get an error message popup saying "Photoshop CS5.1 has stopped working." with options to check on internet for solution or close program. No error codes!
I reloaded my Photoshop to my C: drive about a week ago, but everything else seem to be working as it is supposed to. I have also installed a wacom pro, but I can't see where this would affect it.
When I have two or more photos open and I want to move them around, everytime I drag one over the other it becomes transparent. This transparency seems to happen once I drag the photo over the ruler but I could be wrong. Once I release the mouse button the two merge into one photo. I believe this has something to do with the photo merge feature. Can I turn this off?
I've seen recent posts about Photo merge crashing, I tried all the workarounds and remedies to no success. I run as Admin and still crashes, and only Photo merge is causing to crash. All other presets and automates are working just fine. I've deleted all Temp files and App Data, still nothing.
My stats are:
Windows 7 Professional Intel i7 vPro (2860Qm @ 2.5GHz) 16GB Ram Nvidia Quadro 2000M (lastest drivers, 266.96) Scratch disk is 200GB and I'm using about 9GB of Ram
So I don't think it's my computer that's the problem, but either the java script file for the automate or possible update?
Photoshop CS5 crashes when I try to use photo merge. Is there anything I can do so this wont happen?? Now I can't make panorama pictures. It's on my laptop it doesn't work. Samsung laptop with Windows 7. It works on my stationary computer with Windows Vista. I have the same version of PS CS5 on both computers.
The Photomerge in Photoshop CS4E is a fantastic tool when it gets it right, but what can you do when it doesn't? I've got a bunch of 9 images (in a "Noughts and Crosses" or "Tic Tac Toe" layout), all with 50% overlap, but a lot of fairly blank areas - this can't be avoided, they are nautical charts. When I do Auto Photomerge on these, a couple of the images get put in the wrong place. Is there a way to position the images in their approximate place, then get Photoshop to finish the job automatically?
cs3 had this option when creating a photomerge that made it so much easier to combine several photos when cs3 got lost in trying to merge.
I looked and looked in cs4 for the interactive command, so much simpler than grabbing the eraser and opacity, but I could not find the interactive addition for photomerge. Has it been moved or what ? IIRC in cs3 it was interactive from bridge..
When using the Photomerge tool in CS3 to do merges of 10+ images (10MP RAW), the process almost always stops at the blending step. Images are laid out properly, but the edges are not blended. Is there a particular reason for this? System has 3GB RAM, running XP (SP3).
Note that for smaller merges, the process completes fine.
I'd also be curious to know if the Photomerge facility has been improved in CS4. It works well enough, but on a dual-core 2GHZ system, it still can take 5 minutes to do an 8 image photomerge.
I have read and understood the Photomerge tool (and tried the process with the sample images that are in CS2). All this seems to be fine except for a couple of things...
1. To achieve 180 degrees I am going to need more than 3 images right? (overlapping each image by 15%-40%).
a. Can Photomerge in CS2 work with more than 3 images, or is 3 the maximum??
If 3 is the maximum, then it wouldn't be difficult to just increase the canvas width and add on? Or not? Or do 2 sets of 3 then hand stitch those together? What is the best process for achieving 180??
Also, I like to shoot just before sunset,usually. If I did a 180, say with the sun setting in the right hand side of the image, then panned to the left snapping as I go, I am obviously going to get different gradients of blue in the sky, (lighter sky to the right, a darker sky to the left)
Should I shoot in Manual or Aperture?
How will I get the tones in the sky to be seemless?. As long as I overlap by 15% - 40% all should be good?
What is the best process for achieving equal exposure in all shots?
My new instal of CS3 does not have FILE|Automate|Photomerge showing as an option. It did previously. It also lacks the icon to shift to Bridge. When I use the File command to start Bridge I get an error message about missing a JAVA script.
When I start Bridge (which appears to work) and try to send files to CS3 for Photomerge, it tells me that CS3 busy and asks if I want to queue up the work (even if CS3 is open).
This has happened a number of times now, both in CS3 and CS4. When I run the process as I normally do for a motomerge, the process goes along swimmingly until the output stage where the image is closed and nothing is left for me. I don't close the image and I have no idea why it does.
I have used photomerge successfully before, so Im unsure of what the problem is.
