how the latest generation of Intel integrated video performs in Photoshop, Intel HD Graphics 4400 specifically? Does it support Photoshop acceleration, OpenCL etc?
How many graphic memory can it handle? Who is better performer, Intel HD Graphics 4400 or Radeon 6600M?
Between the two processors below, which would you recommend for a system with Vista 64bit and CS4:
Quad Core Intel® Xeon® Processor E5420 (2.50GHz,2X6M L2,1333)
or
Intel® Corei7-920 Processor(8MB L2 Cache, 2.66GHz)
I have read some potential instabilities with the i7 processor, CS4, Vista 64 bit. But maybe this is old info and this processor is fine.
I am thinking of getting a new laptop that uses the Intel 4500hmd video processor. This uses shared memory, but the laptop would come with 4GB RAM and run with the Vista 64 bit OS. The latest Intel driver claims the 4500 has open GL 2.0. Has anyone on the forum used the Intel 4500HMD successfuly with Photoshop CS4.Â
View 4 Replies View RelatedI'm a graphic designer on a terribly limited budget and need a new laptop.I've been looking at the Lenovo G580 laptop, which has:
8GB RAM, 3rd Generation Intel Core i5-3210M Processor( 2.50GHz 1600MHz 3MB)Intel HD Graphics 4000. Ever tried the Intel HD Graphics 4000 on CS5.5, with emphasis on Photoshop, Illustrator and InDesign?
I'm just wondering if it is normal I don't have the 3D feature in Photoshop CS6. I had it installed in my old laptop (an old one with a AMD Vision processor) and the 3D option was available, but after I moved all my old programs to my new one (a Windows 7, 64 bits, Intel Core i5, Intel HD 3000 Graphics video card) this option is not available. I dunno if it's due to the fact that OpenCL is not available in my laptop or if it's anything else.
View 21 Replies View RelatedWhen using Photoshop CS6 on Windows 8 [Surface Pro], it randomly crashes. I normally can only use Photoshop for less than a minute, doing less than ten actions, before it crashes. I get an error message saying "Adobe Photoshop CS6 has stopped working." If I debug it using Visual Studio, I get this message:
Â
Unhandled exception at 0x5442B60E (ig7icd32.dll) in Photoshop.exe: 0xC0000005: Access violation reading location 0x0000002C.
Â
I looked up ig7icd32.dll and it seems to be published by Intel and related to my graphics hardware, so I assume the problem is related to my Intel HD Graphics 4000.how to fix this problem or as to what might be causing it?
Â
EDIT:Also, when launching Photoshop, I get this message:
Â
Photoshop has encountered a problem with the display driver, and has temporarily disabled enhancements which use the graphics hardware. Check the manufacturer's website for the latest software.
Â
Graphics hardware enhancements can be enabled in the performance panel of preferences.For more information, visit:[URL]...All my drivers are fully updated, and all Windows updates are installed. No other applications have any problems with my graphics hardware.
I bought a new laptop Asus k73SV-TY081V version. When i'm working with autoCAD 2012, my videocard crashes and i get a message: "Display driver Intel Graphics Accelerator Drivers for Windows 7® stopped responding and has successfully recovered"
View 9 Replies View RelatedI can't decide between getting the Amd Dual-Core 64bit 4400 or the 4800 processor. Will I see a big difference in performance with CS2? is the price worth it? I plan to have 4GB of memory on the computer.
I currently use an AMD 32bit 3000 processor with 1GB of ram and the computer can barely handle the files created by my 1Ds Mark II. I add just one layer in CS2 to the file and its all over. My computer slows to a crawl.
I have never used an Apple Mac before so I would like to know, what is the difference between using Photoshop in a Mac and in a PC? Assuming that both platform utilizes similar hardware spec...
View 9 Replies View Relatedhow do i migrate my cs4 to an intel mac/
View 16 Replies View RelatedI am trying to find out how far back version of PS I can use
View 1 Replies View RelatedMac Pro - When trying to print a file it quits instantly and you have to restart Photoshop... Now, this only happens AFTER you crop the image... if you print the unaltered photoshop file it prints fine.
View 1 Replies View RelatedI currently own a laptop which I use heavily for image editing. It is powered by a very fast Core 2 Duo 2.4GHz and a power-efficient yet perfectly capable Intel X3100 integrated graphics chip.
My chip supports all of the necessary Shader versions, OpenGL 2.0, etc. ( http://en.wikipedia.org/wiki/Intel_GMA#GMA_X3100 ). However, when I visit the Preferences menu to enable the OpenGL acceleration, I am presented with a grayed-out option telling me I may need to upgrade my drivers or graphics card.
I have tried new driver versions. Certainly I should not have to purchase another card (impossible in a laptop in fact) seeing as my chip supports all of the requisite features.
I have bought my first mac, a brand new Mac Pro dual 2.6ghz.
I am a graphic artist, and so of course photoshop cs2 will be the main program I use. I am wondering how they will be running on the Intel chip that is shipping with the MacPro.
I know that the macbook and imac both run a different intel chip, does CS2 run pretty good on those? Or are the intel mac users at a serious disadvantage until adobe releases a universal version of photoshop?
I thought it interesting enough to share because of the odd discussions we've had around drives in recent months. a lot of the regular posters seem to be conspicuous by their absence since I got back from my trip. Have they all been at Photoshop World? URL....
View 1 Replies View RelatedI have installed several times fresh copies of ps9 and same results the imac intel duo computer WILL NO RESTART unless shut down from back button ,then computer will have to be started manually and thereafter the computer will re start every single time UNTIL I USE ps9 Why ? I have taken the computer to Apple (under apple care) these people don't find anything wrong with the computer,but PS9 software and they are correct, is there any "plist" that needs to be trashed or updates.
View 8 Replies View RelatedBought Elements 4 in 2007 for my previous Power Mac and now just upgraded to a Macbook Pro and the program won't install . Get the message that this version no longer supported for new the Intel Chip Macs. I know the version is old but worked perfectly well for my purposes.
Â
So do I just chuck that money away and fork out for another prologize? What is the next version?
I have Adobe Design Collection (before it became CS this and that...)
 Â
eg Photoshop 7
Illustrator 10
InDesign 2
Acrobat 5.
 Â
I've installed Illustrator 10. Fine. It recognised the lack of Classic environment and installed. It runs ok. But Photoshop 7. It installed as per above. But when it attempts to load it hangs with the error, "An unexpected and unrecoverable problem has occurred because of a program error. Photoshop will now exit."
Â
I have an iMac dual core Intel 3.O with 4 gigs of ram. SnowLeopard 10.6.8
It is stated quite clearly on Corel's website that Video Studio Pro X3 is "Enhanced! NVIDIA® CUDA™ GPU acceleration and Intel® Core™ i7 CPU optimization "
Post on this forum seem to indicate a serious problem and that users with i7 processors have to change their Bios settings each time they use Video Studio and disable one of the great features of this CPU, i.e. Hyperthreading. Is this true or only under certain conditions ?
I am a new VSX5 user. I installed the software last night, and today when I tried uploading a picture (PNG) to the timeline, I got the following error message: "These files cannot be added to this project. These files may be of unknown file format. The computer does not have enough memory or the file is copyright protected." I am able to add a video to my timeline. The picture was a screen shot from an ipad I took, so I doubt it is copyright protected.
When it comes to computer parts, and things of that nature, I don't necessarily know too much. Upon research my Toshiba Satellite C655-S5512 (low end computer, but it was all I could afford earlier this year) has an Intel Pentium B960 processor. Is that why I'm getting that error? And, is there anyway to be able to use this software in the mean time until I upgrade to a desktop computer in a month or two?
I updated the Video Studio Prox5 software with the Service Pack1.
This is what my system is running on:
Intel Pentium CPU B960 2.2GHZ processor
RAM: 4.0GB
64-bit operating system
If I upgrade my RAM, will that work?
Just downloaded a trial of VideoStudio X4, so far so good. However, is there an option inside the program to use Intel Quick Sync or does the program does detect and use it automatically when you encode with H264?
View 7 Replies View Relatedwhy (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.Â
View 14 Replies View RelatedOften whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
View 6 Replies View Relatedi´m using CRD since X3 so I think i´m quite experienced with all the crashes and uncompatibilities but now I have a problem which I can´t solve.
 I made a graphic project which is quite large (2,6m x 2,0m @ 300dpi) and including raster grahics. The CDR file itself has about 400MB. When I tried to export this graphic to the png or jpg at the current size Corel X5 always crashes. I tried almost everything on many computers but always the same problem.
It looks like the project is too large for export. At this moment I desperately need to export the file to jpg or png at full resolution. Maybe X6 is more stable when exports or I have to simplify the project somehow but...
FILE IS UPLOADED here and I need to have it 2,6m x 2,0m: [URL]
I have a 900 x 500 px image in Adobe Illustrator, which overlaps a bit the canvas on the left side.
When I open this file with Corel, it adjusts my graphics so that it's centered on the screen. The AI file is centered on another point. Also, the canvas Corel creates is A4 sized. I always have to resize the canvas and then manually adjust the position of my graphics.
Question: How can I save an AI file so that when I open it at Corel, the position and size of the canvas will be exactly the same?
I often create graphics in CorelDRAW export it and inserting it into my MS Word documents and finally convert my documents to pdf. When it is vector graphics, exporting as EPS works fine: The increase in file size is small and lines are displayed perfect independant of how much you zoom in the final pdf document. When I handle bitmaps, I usually export as JPG (or PNG), which works well too. My problem arise when I have a mixed vector and bitmap image. I have imported a bitmap into CorelDRAW and created some lines on top of it. I want to export it as a whole. If I export as EPS, the final result is fine, but filesize has increased considerable. If I choose to export as jpg, the filesize is fine, but the lines are getting slightly blurry. Is there a way to get the best of both Worlds - resonable filesize and perfect lines? Maybe settings in some dialog??
View 7 Replies View RelatedHow on earth do you export bitmaps cropped to the size of the canvas? This seems like the simplest functionality ever but i can't get it to work. For example, I am designing an advert for use online. It needs to be 600px wide x 150px high. I may want to use a background image or a photo that when placed goes beyond the edge of the canvas. Logic dictates i would only want to export the canvas with a web image (otherwise why would i have set an exact number of pixels.) Â However, Corel insists on exporting everything on the canvas and desktop. Surely it should allow us to choose the bounding area of the exported bitmap.
Just to clarify what I mean, i've included a screen shot showing and example original graphic and the export result. I'm sure there must be an easy way to do this. If it's one like this i can crop it easily, but sometimes a print customer will ask me to send them, for example, a 32pp booklet we have designed for them with each page as a JPG and to crop each one manually is a right pain.
X5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.
Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects.  Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.
Very costly and time consuming - print preview shows all correct but output is not the same.
Running Win 7 64bit 8GB Ram
I have some Ai files that I need to open in X6 but they use linked images which I have, but when opening in CorelDraw all I get is the basic Ai stuff but not the linked images, is there an easy way to open the Ai file and see it as it was intended?
As a sub note I can't go back to the supplier of the Ai file to make any changes.
I just used the help file for the first time in ages and noticed all the links to the graphics are broken hence no diagrams etc. I tried to search out where they are usually stored and it gives some weird Address under properties. It's a vba so suppose it's a database? How do I restore the links without having to do a re-install?
As to the pen: How do you stop the annoying over-the-top predictive curve that happens past the node in the next section after a long drag to form the first curve. i.e. you simply want to draw a straight line after dragging out a curved section previously and you get this unmanageable curve to deal with ?
