Photoshop :: Square Snail Shell
Mar 10, 2008i've got an image of a snail shell
and need to somehow edit it so that it becomes a perfect square shape. i've tried transform-warp in photoshop but that was no good at all.
ADVERTISEMENT
Maya Modeling :: Design Table From Image - Giving Thickness To Snail Shell
Feb 1, 2014I would like to design the table from the image. I am having some problems giving thickness to the snail shell. I extruded it (wasn't that pleased with the result but... it was better than nothing) and tried to smooth it. The result was a horror because there were to many edges and maya took them as a height difference.
My question is:
1. How can i make the thickness better, without all the holes? (can i create edges between vertices)
2. How can i smooth the poly without making it look like a shell covered inside with spikes.
GIMP :: Make Free Select Non-square Selection Perfect Square
Mar 22, 2013I used the free select tool to free select an area of an image that is not a square (odd shape), how do I make that selection a perfect square if pasted to new image or new layer??? rectangular would be fine too...
View 14 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Diesel Expression - Display Area In Square Feet Not Square Inches?
Feb 16, 2010How I can update my diesel expression to display the area in square feet not square inches. See expression below.
^C^Cattdia;0;_-insert;AREABLK;1;1;0;$M=$(getvar,AREA);attdia;1
Photoshop :: Square Selection Tool, The Selection Edges Are Rounded Rather Than Square
Jan 18, 2009When I use the square selection tool, the selection edges are rounded rather than square. I can't remember how to rset this.
How do you make the edges square by default?
Photoshop :: A Square Is Not Square
Sep 30, 2007I'm using CS3 with a new computer and a 17in crt monitor. I set the monitor resolution via windows to 1280x1024. Made a 4 in square in Photoshop. It's square. When I change the resolution to anything less than 1280x1024 the square is taller than wide. It still shows 4x4 inches with the rulers.
View 5 Replies View RelatedPhotoshop :: Saved Files As PSD Now (Windows Shell Common Dll) Won't Open?
Feb 12, 2013I am having a problem with opening some files in Photoshop. I am using Photoshop CS5.1 Extended (Version 12.1) and have Windows 7 64 bit SP1 OS.
I am trying to open a few templates I made in PhotoShop for a client and they worked fine when I used them 3 weeks ago. All were saved as .psd documents. Now when I go to open them they no longer have the PS icon (to show they would be opened by PhotoShop). When I try to open them I get "Could not complete your request because it is not the right type of document." I have had this problem once before but it is confusing to me because 2 of the other similar .psd files I saved at the same timeframe(separate elements for the temlate) are perfectly fine, only the ones I need do not want to open.
I checked file properties and it claims these files are now Windows Shell Common Dll files.
3ds Max :: Ghost In Shell Effect
Mar 22, 2012I am trying to create an effect that I saw in ghost of the shell
The video will explain plz skip to 1:51 sec to see the effect. [URL] ... How can I create this in Max?
AutoCAD Inventor :: Shell Out A Loft
Feb 27, 2012I need to shell out a Loft in the attached IV 2012 part file.The Loft i tried also as a new solid but the shell also cuts into the cylinder ( revolution 1 ) . I only want the 2 sides and bottom of the Loft to be Shelled, not the cylinder. What do i need to change to get the shell to work?
View 4 Replies View Related3ds Max :: Why Shell Skewed When Pivots Are Straight
Dec 28, 2011I have an editable poly that's a 1D circle (not created from circle tool, detached from another), but when I try to apply the shell modifier, it does not extrude "straight" - instead it's skewed.
The affect pivots only are set like this, so it's not going in the direction of the pivot either..
How do I change the direction of the shell?
Autodesk 3ds Max 2012
AutoCad 3D :: Getting Error When Shell A Solid
Aug 31, 2012I am trying to shell a solid. I get error "No solution for vertex". I am thinking this may be due to where I swept two helix's and where they are connected is not a smooth transition. The file is too large to attach. How to make and attach a screen shot of my drawing.
View 9 Replies View RelatedAutoCad 3D :: Missing Shell Command?
Jan 17, 2012I am trying to shell an object in AutoCad 2010 and I cant find it? I tried typing "Shell" but it didnt work either.
Autocad 2010, Windows 7 x64.
CorelDRAW X5 :: Installing Windows Shell Extension?
May 16, 2012I lost my ability to see thumbnails in my file preview after I installed an X6 trial, and I can't get them back. I uninstalled X6 and read to uninstall the extension and reinstall it to get it back....but can't find the file.
View 3 Replies View RelatedCorelDRAW Graphics Suite X4 :: Shell Extension
Oct 31, 2013i dont see corel draw icon as default, only blank one and also i dont see content preview in explorer window.
i have win 7x64, corel x4se and wse installed. from cd.
what should i do?
tip: 1 week before i had win7 x86 and everythink was fine.
Corel PHOTO-PAINT X6 :: Shell Extension
Aug 11, 20131. I did a clean reinstall of Windows 7 and then installed X6. Photo Paint works fine.
2. However, I don't see any CPT images in Windows Explorer. Just a Corel icon.
3. Uninstalled the Shell Extension. Then reinstalled first the 64 bit and then the 32 bit msi Shell Extensions from the DVD.
4. Windows still does not show CPT images.
AutoCAD Inventor :: Possible To Fill A Shell With Sand?
Jan 24, 2012Is it possible to fill a shell with sand? The end use of my design will have sand - like in a childs plasitc basketball hoop/stand assembly and I would like to try to approximate the center of gravity and other useful info.
ACAD 2010
ACADE 2008
AIS 2009
AutoCAD Inventor :: Shell Connector Tolerance
Jan 10, 2014Whats the importance of "Shell Connector Tolerance"in the create new simulation dialog box. Any example or some kind of illustration to explain this.
C1
Inventor Professional 2013
Vault Collaboration 2013
AutoCAD Inventor :: Error When Trying To Shell A Part?
Apr 22, 2012When trying to shell a part i get the error: the attempted shell operation was unable to solve for a vertex....etc. i have attached the problem part file, of which the drawing is a fairly complicated frame (a chassis concept for a 3 wheeled race car i am designing)
How the part was made:It was created in an assembly using the frame generator tool and then converted to part file using the shrinkwrap feature. When using the shrinkwrap command, i selected: single solid body merging out seams between planar faces, All hole patching, break link, and remove all internal voids. and then when trying to shell i get the error message when selecting a wall thickness of 2mm.
i cant understand why the shell feature does not work as i have successfully shelled a very similar part file (with only slight differences in geometry from the file attached in the same way as what i am trying to do with this part). i can provide this part file upon request or the assembly file from which either was created. i need to shell the component in this way so that i can run accurate FEA (stress analysis) for crash simulations on it
I am using inventor 2013 (64bit OS)
AutoCAD Inventor :: Making A Shell Of A Mesh?
Dec 22, 2012I am trying to make a shell of a mesh feature after I have upscaled it.
I do not think the regular shell technique will work as my mesh feature has hundreds of surfaces. So, I decided to open the file with my part in it and then derive the same part but a little bigger using the derive button. I would then subtract out the smaller, original, one to make a shell of the bigger, derived one.
Unfortunately, when I use this method to upscale, the 2 objects are not concentric so I cannot make the uniform shell that I want to.
I have attached the file of my mesh feature in case you want to see it. not that you will have to convert the object you see on my file into a base feature before doing anything with it. I did not because it would have made the file to big to attach.
AutoCAD Inventor :: Shell Command On Sphere
Aug 22, 2013I have a funnel with a curved top. I'm trying to project an inset of the border onto the curved surface and use the shell command to create a hollow funnel with an overhanging lip. I have projected the inset successfully, but cannot select the resulting smaller face, just the whole original face.
A similar problem that I tried while attempting to figure this out was shelling a sphere. 2d sketch -> 3d sketch project onto surface, and try applying shell to the resulting "face". However I can only select the whole face when trying to shell.
AutoCAD Inventor :: Shape Will Not Shell Out With 3mm Thickness
Dec 12, 2013This shape will not shell out with a 3mm thickness.....i suspect i may have not modelled correctly....how would you model this shape part so as it can be shelled out?
View 8 Replies View RelatedMaya Modeling :: Subdivision To Poly Shell?
Apr 7, 2011so this is the most annoying thing ever. I have a subdiv. i turned it to a poly (to get rid of the bloody shell in render view, i dont even know why its showing) when i did this previously, the shell went away when it became a poly, now its not. I'm new to how subdiv's work so am i missing something?
View 1 Replies View RelatedMaya Animation :: How To Keep The Body From Penetrating The Shell
Apr 30, 2011I'm rigging my first character in Maya 2011 using Advanced Skeleton.
It has a hard shell breast plate, so I'm a bit worried about how to keep the body from penetrating the shell.
Any tips for a neophyte when using Advanced Skeleton - or any issues that are obvious when using my model?
Also, I'm going to be applying some motion capture in Motion Builder as well as animating by hand, so ... any comments
BTW - another thing I'm worried about is getting the non t-pose character rigged. This is how the artist gave it to me, and I know that MotionBuilder wants a t-pose. Hopefully, I can rig it in AdvancedSkeleton - and use that to get to a t-pose. But ... I'm not exactly sure of the best way?
AutoCad 3D :: SHELL - No Lumps Left In Body
Apr 29, 2012SHELL.jpg
Tried do the model as diagram shows on the left. But got the message "No lumps left in body" when doing the SHELL command. What does it mean?
AutoCAD 2010 :: Trying To Shell A Solid Object
Nov 26, 2012I'm currently encountering issues when trying to shell a solid object (any). The command doesn't work for me.
View 1 Replies View RelatedAutoCAD Inventor :: Shell Out The Part With 2mm Thickness Walls?
Nov 16, 2012How can i shell out the part with 2mm thickness walls?
View 1 Replies View RelatedAutoCAD LT :: Multiline Text Says It Cannot Find Shell Program
Sep 11, 2013After installing the 2013LT application the Multiline Text Function worked fine, however, now it will not function at all. "Cannot find Shell Program"--is what displays at the Command Line when attempting to create a text box in a file.
View 2 Replies View RelatedAutoCAD Inventor :: Splitting Sections Of A Tank Shell
Jun 1, 2012Is there a way to use the Split Solid tool to partially split a circle and have multiple solids after.
Ex) I would like to cut the tank at the 180 and 270 deg marks. Using the split tool still cuts through 0 and 90. I tried drawing a line from a top view that started from center going through 180, but it still goes through 0 as well.
I've attached an example shell of where I would like to have 6 solids after.
AutoCAD Inventor :: Shell Feature / Removing Any Outside Walls
Sep 17, 2013Using the shell feature. I have used a bit in the past and its always done what I want. This go around what I want is to shell without removing any outside walls, which it does no matter I seem to try. I can easily add a new outter wall back in, but if I can shell without removing an outter wall it would be just that much cleaner in my tree.
View 5 Replies View RelatedMaya Modeling :: Give Shell Thickness Without Extruding
Mar 27, 2012I am converting over from Softimage (which I love, but is Windows only) to Maya for OSX. Is there an equivalent in Maya to the new thickness tool available in Softimage 2012 SAP? For instance, if one creates a sphere polygonal object in Maya and slices it, is there a way to give the shell a thickness (like creating a bowl) other than just extruding?
View 1 Replies View RelatedAutoCAD Inventor :: Turning Assembly Model Into Shell?
Oct 5, 2012I would like to be able to the share external geometry of a fully assembled mechanical model without surrendering any part or assembly data. Is there a way to turn this assembly into an external surface "shell"…?
View 1 Replies View Related
