i can't highlight it and thus finish scanning. The worst part is that i've tried all the buttons and screen size changes but nothing works except terminating the whole photoshop proccess and starting all over again.
View 4 RepliesIs there a way to move the drop down window that covers the photo that is being edited so we can see what is happening.
View 2 Replies View RelatedI tried to use a scanned picture in photoshop and is said the file was too large I scanned the photo at 4800 dpi. Thats too large. What the highest resolution is, that can be used in Photoshop?
View 5 Replies View RelatedWhen i use standard Acad-functions or even simply select an object like a polyline from land-survey,the "ribbon" changes to the corresponding Topic of the object,and the Map3D window looses its focus. (normal windows-mouse-cursor is displayed, not the AutoCAD crosshair). After clicking in Map 3D window again, crosshair reappears,and work can continue.
It doesn't matter if Map3d-windows is in windowed mode or fullscreen,it also doesn't matter if the windows is only on one of my 2 monitors or on both.
didn't have this problems using Topobase Client 2009,2010,2011...but since 2012 few problems evolved... (drawing-order-bug, memory-leak problem etc. etc.)
How do i edit a text in the middle of a picture that was scanned ? What software will allow me to do this ? I currently have Photoshop and xi.
View 7 Replies View Relatedwhat is the highest resolution I can use in photoshop from a scanned picture
View 2 Replies View RelatedI scanned a picture into photoshop at a resolution of 300. When i print it back out the colours are off and the image is kinda faded/pixely.
View 1 Replies View RelatedI have some scanned pages from an old book, and the lines etc curve downwards near one edge. Is there a way to easily straighten them out?
View 1 Replies View RelatedI have tried this feature with mixed results. Scaning 2,3 or 4 pictures of different sizes, changing angles using an HP8600 Multifunction device. I have tried both scannig using HP software and directly with Elements at 200, 300 and 600 dpi. Elemets will sometime split off one of the pics but is not reliably sepatating them all. What ca I do to improve my results? I have a lot of pics to scan and really don't want to do them one at a time.
View 1 Replies View RelatedI am a newbe with pro4. How do I change a scanned negative image to a positive image? swap black for white and vis versa?
View 10 Replies View RelatedI have a ton of pictures of the window displays there, but alot of my photo's have glare on them so you can see part of the window display, but also cars and people from the street. Is there anyway to fix these pictures? I really hope so, because i really want to save these pictures, the window displays were gorgeous!
View 9 Replies View RelatedI have a pic of myself, and I was wondering how I could get a "album cover" sort of look.
View 4 Replies View RelatedI tried making an ebook cover.
View 9 Replies View RelatedLevel: Newbie'ish OS: Win7 64bit PS:CS6
I am just curious about the following...
Below is the layers panel with the BG layer OFF and the picture below it shows how my image looks when the BG is OFF.
Now here is the layers panel with the BG layer ON and here's my image when the BG layer is ON
I am a bit confused as to why the white BG is covering the 1st layer above it ... isn't the BG layer suppose to Always be Behind the 1st layer? Both BG layers are locked and in the same Z order ....
So, I'm just wondering why this is happening.
I make InDesign photo covers very well. If I wanted to begin using PS (CS3) too to make my photo covers more sophisticated, what feature or technique would I use in PS or how to steps for making a photo cover, using PS, but with final design in IDCS.
I know I can simply use feathering in IDCS but I want to do more sophisticated designs.
I want to learn how to make professional eBook and Print book covers. Which software is best for that?
View 4 Replies View RelatedI want to create cd covers by mixing images from different photos. Collage if you will.
I found a tutorial that describes the selection process and so forth. I also read something about how Image Ready makes it easier to cut up pictures for rearranging. How so?
Also I wonder if I can use photoshop to make images appear "ghostly". Like the ghosts in the Haunted House film. Or the librarian ghost in Ghostbusters.
How do I minimize one picture, in order to view two pictures is the same screen?
More details...In my previous version of PSP, when working on a photo, the tab at the top for the photo had the following options: Minimize ( _ ), Maximize ( [ ] ) and Close ( X ), similar to the options found in the upper right corner of most windows.
However, in X5, the picture window/photo tab only has the Close ( X ) option and no Minimize ( _ ) or Maximize ( X ) option.What am I missing or am I just daft?
I found being able to minimize multiple photos in the same window useful when pasting/cloming one image over another.Or, if I have multiple, yet very similar images, determining which is best without having to tab back and forth.
In Photoshop CS6 the flashing type cursor cuts through several lines of text (see image).
This makes it hard to select text since it is hard to tell which line the cursor will select (see image).
Can the text cursor be resized? This happens no matter what type size is used or what paragraph settings are selected. I am using Windows 7 professional, service pack 1 on a Dell Precision T3500 with 8.0 GB RAM.
I would like to scan the cover of my book but on it has a price tag that is very difficult to remove. Even if i removed it, there will be bits and pieces of it left.
Does anyone know how i can crop the price tag and make sure that that cropped area blends in with the book?
And if the book is a little bit yellowish as it is quite vintage, how do i touch up image?
os windows 7, upgraded to Gimp 2.8.4 I open an .xcf file and go to single window mode. everthing looks ok the zero offsets on the rulers are where they should be and I can see the bottom of the gimp window where the % size change is. I then ask for a new tool bar which is provided and locked to the widow. if i go to full screen and then back the picture is pushed down as are the ruler zero's and i now can't get to the bottom of the screen. this annoying behavior does not seem to happen in multi window mode. attached is a screen capture.
View 4 Replies View RelatedWhen I want to upload pictures into Lightroom 5.2RC the window is black and no picture is shown. This was also true for Lightroom 5. The same pictures are imported into LR 4 without any problems.
My system: 27" IMac newest generation, 16GB Ram. Uploading from a Ricoh GR, Fuji X-Pro 1, Fuji X100 directly or from a Hama cardreader USB 2 or 3.
I've got two ebooks coming out with "A NOVEL" in one and "a novel by" in the other. I put those in there thinking that they would distinguish them from other kinds of books, but hanging around in the ebook forums the great majority of people are like, 'Using 'a novel by' is amateurish and unnecessary as the book will be amongst other novels.'
Well, I've looked at plenty of ebooks online I thought were novels that ended up being short stories and I was not pleased, so I'm not entirely convinced I should be getting rid of them (the 'a novel by,' that is).
question #1) Do you think I should be getting rid of them?
Question #2) If so, any good way of doing that, where it still looks good?
The Find I did in paint.net before I knew about layers (unfortunately), so everything there is on the same layer.
Man of God was done by a professional cover designer and I have asked him to remove it, but I'm not sure if he will or not. (He did the cover maybe 7 months ago and I've got an email into him three days ago and haven't heard back.) So I don't know how this one was made.
And one last question: what is up with the file re-sizing action? I know that's vague, but when I re-sized The Find photo to 50% the paint.net uploader said it was too big. When I re-sized it to 40% paint.net said it was only 33.24 kb. Can that be? Plus paint.net was calling the file sizes just about double what they were in the file's properties.
I am new to In Design having come from years with QuarkXpress. I need to put an 8 page owners manual together. The front & back pages have to be set up properly for the printer. How is this don in ID?
View 3 Replies View RelatedI'm trying to take the square cd cover image and make a cassette tape cover, or j-card, with that image.
Here's a picture of a j-card template.
Right now all I want is the front cover, spine and tail. I wasn't sure if the templates I found were compatible so i tried to make my own template. What I did was make three separate ones. One for the front cover, one for the spine and one for the tail. I was able to take the square image and use the scale tool to make the image fit inside the front cover. The first problem I had was not knowing if the image quality was good enough to print. It seemed easier to use inches when I made the template and not pixels. So I made the front cover template 4 in by 2.5625 in. I exported the image as a jpg but the final image looked too small. So now I'm not sure how many pixels I need for a printable picture.
Now with the spine and tail most likely I'll just chose a background color and type over it...Artist, Album Name, Song Titles ext. My plan was to use the jpg images I exported and paste them together, then save that final image as a jpg. and print.
I am aware of the 64 bit versus 32 bit issue. When I ugraded to Windows 7, 64 bit and CS 5.5, I did so because both Adobe and Microsoft indicated I would have to. In CS 5.5, the issue of the 32 bit versus 64 bit driver was not serious because--although Windows 64 bit had no trouble scanning and Photoshop 64bit did, I installed the Photoshop CS 5.5, 32 bit version, and it worked.
Today, CS5.5 disappeared, "Photoshop has ecnountered an error with the display driver, and has temporarily disabled GPU enhnacements. Check the video card manufacturer's website for the latest software. GPU enhancement can be enabled in the Performance panel of Preferences." Not really [it's not a driver problem], Photoshop won't stay on, it simply closes.
I am scanning with Adobe photoshop 7.0 using Vista WIA driver from Microsoft and Scanner is from Toshiba. I am using the Automatic document feeder with 3 pages but i am getting only one page(First page) in the photoshop Window.
With Twain driver it is working fine i am able to get all the three pages. is the Adobe photoshop is not supporting the ADF scanning with WIA?
I want to scan from within CS4 x64, like we used to in the old days! I appreciate that TWAIN is making way for WIA, however, I can't find a way to scan from within photoshop and NOT have to immediately save the scanned image. In want to just scan and open, and then make the decision to save (or not) later on.
View 1 Replies View RelatedI have cs6, I want to scan from the program, My all in one Lexmark is not recognized? I tried to get a plug in from Lexmark, they said they don't support cs6?
View 2 Replies View RelatedI've been using this product for a few years and only a few months ago I re-installed it on Windows 7 and a few days ago I closed it and it stopped working right when it says "Scanning for Plug-Ins". I haven't changed anything with the product. While I had it installed on the D-drive (The C and D got mixed up) it hadn't had a problem until a few days after continually hearing that the C: drive was full (leading to mass deletions of unused programs and files). Just today I had fixed the problem of the drives and the program had the same problem. I've tried the multiprocessor plug-in, uninstalling and reinstalling it, There are only a few oddities I can say happened during the reinstallation, it was unable to activate.
Operating System: Windows 7
Program: Photoshop CS version 8.0
Error Message:
Description: A problem caused this program to stop interacting with Windows.
Problem signature:
Problem Event Name: AppHangB1
Application Name: Photoshop.exe
Application Version: 8.0.0.0
Application Timestamp: 3f8fad4d
Hang Signature: 472f
[code]...
Running PS 7 on Windows XP.
Is it possible to do a multipage scan in Photoshop 7 and to have all the scanned pages saved as one PDF file. At the moment I can only find a way that gives me the same number of files as I have scanned in.
The reason I am having to do this is because I am having a problem with the scanning facility in Acrobat 8.