Photoshop :: "light-enters-dusty-room-effect"
Jul 9, 2004hey anyone know how to make the effect similar to when your have a dusty room and light enters through the window and you can see the rays?
View 1 Replies
ADVERTISEMENT
Photoshop :: How To Make An "uni-directional Burst" Of Light?
Jun 21, 2006In the Jesus photo 2 lightbursts of different colors irradiates from His heart. How can I make this effect with Photoshop?
View 2 Replies View RelatedPhotoshop :: Creating A "light Beam"
Sep 23, 2007i need to create a light ray image that's going to come off of a huge "hollywood light". i just need a big yellow diagonal beam that gets wider as it goes on.. sorry if this sounds confusing, but i dont' know how to describe it. i would also like it to fade?
View 5 Replies View RelatedPhotoshop :: Getting Light "streak" Effect
Apr 8, 2003how to get the "light" streaks that so so many people do now using airbrushing/blending/layering in Photoshop...
Located in the lower right hand side of the picture, the light "streaks" that are going down and to the right, slightly...
Located in the lower left hand portion of the pic.. the lines that streak up and to the left located under the geometric one or two .. Kinda "fast" looking but a large portion is blurred.
Photoshop :: Installation With Light Room
Jun 22, 2008I have installed Lightroom 1.4 and some reason it was not installed properly.
So, I tried o uninstall, it would not work.
I went to control panel and program uninstall ... it would not work.
I tried to reinstall and I get the message "Error 1714 The ollder version of Lightroom cannnot be removed. COntact your technical group.
Photoshop :: Light Room 4 And Fujis X-Trans Filter?
Dec 16, 2012Converting a RAF Raw from Fujis X-E1 or X-Pro1 cameras will result in a harsh blurry JPG. The inCamera-Raw-Conversation or the RAW-Converting from Fujis delivered software results are much much better.
I know, even with Canons or Nikons LR4 does sometimes a better or a worse job than the dedicated converters, but with the new Fujifilm Cameras it is unusable.
Adobe may know the problem, because well known camera reviewer like dpreview stated there point on this topic already in their reviews. Also Fujifilm itself told me they reported the issues to Adobe.
My question here is, what is the current status? The new 7.3 or rather LR 4.3 do not give any improvements on this problem. Which is very disappointing, especially for early X-Pro1 owners.
Photoshop :: Light Room Custom Camera Calibration
Aug 27, 2013I created a custom calibration in dng profile editor. I saved in both the global library and user don't see it showing up in light room calibration drop down only the built in stuff'
View 2 Replies View RelatedPhotoshop :: Open Camera Raw Alias Or Light Room / Bridge
Jun 22, 2013I have about 20 images that I was trying to Burn in a DVD but , I ended up getting CR2 Alias files with an arrow at the bottom left corner.
I want to open the images either in Photoshop CS6 or in Light Room 4 or in Bridge. How to open the images in jpg. or in RAW.
Photoshop :: Can CS5 Or Light Room Utilize Double Precision Capable GPUs
Mar 27, 2013I need to upgrade my graphics card. Question can either Photoshop CS5 or Light room 5 utilize double precision capable GPUs?
Background: Application- photographic RAW files editing (no video editing.) Software- Photoshop version CS5 and Light room version 4, OS- windows 7 64bit, Hardware- Asus P8P67 Deluxe LGA 1155, Intel Core i5 2400 processor, 16GB SDRAM, SSD (apps/temp files), HD (archives), current video card- Quatro FX 1500.
Revit :: Create Schedule That Figures Out Light Power Density For Each Room?
Sep 16, 2011I am trying to create a Schedule that figures out Light Power density for each room. The first issue is getting Lights to register what room they are located in. The next issue is getting the room area parameter to show up in the available fields. It is funny b/c Volume shows up but not the room area. How hard could that have to been to add that to the available list since volume is there.
View 1 Replies View RelatedPhotoshop :: Light Trails"
Apr 22, 2007I come on these forums sometimes, to browse.
Anyway, I have a "fairly" advanced knowledge of photoshop,
and i finally posed myself a "particular" question on a particular "effect".
So i regestered, and here comes the nutshell (question) :
I've seen these quite often in still images, but also in videos.
They're "light" trails, like fire, but alot brighter, like night lights under a shakey mobile phone camera.
Photoshop :: Static Picture, Make Water "shimmer" Or "move"
May 26, 2007I have a picture of a cabin on a lake, I want to use this as the flash intro for a website. I would like a mist to cover the picture and then float away, and the water in the lake to "shimmer" or make it look as if it is "moving"...kind of like you were looking at a video clip, not a static picture.
Is this something I would do in any of the creative suite programs? or studio 8 programs? or is it something completely different.
Photoshop :: Scratchy And Dusty Look
Dec 5, 2002How to make those scratches and dirty in a photo, so it looks either old or just like it have been in the drawer for much too long? (like picture number 15 in the site's entrance for example, or even that cool effect in picture 9 - the left side.)
I already got the hand on doing the borders using masks and filters, but I still don't know if I need a filter to do the rest or there's another way. (OT- oh my, sun! after that scary storm! ain't this one crazy planet).
Photoshop :: Put 4"x8" Image Into 4"x6" Space Without Too Much Distortion?
Mar 29, 2013I want to put a 4"x8' image into a 4"x6" space without too much distortion.
View 5 Replies View RelatedPhotoshop :: Remove "copy" From "save As"?
May 20, 2006At work, whenever I "save as" a jpg or tif or whatever, it just renames the extension. eg. 'Work.psd' -> 'Work.jpg'. But when I work from home, whenever I "save as" it appends "copy" to the end, which I really hate. eg. 'Work.psd' -> 'Work copy.jpg'. I know this is a trivial matter, but it puts an annoying kink in my workflow having to remove "copy" from the file name during my extremly frequent saves. I've tried to google this, but I'm at wit's end trying to find where the preference is hidden.
View 9 Replies View RelatedPhotoshop :: 'Instruction At "0x1a3c4b6b" Referenced At Memory "0x00000028" Memory Could Not Be Read
Jul 22, 2009when I try to open an existing file or create a new one -- the application will shut down unexpectedly and without warning.But I also experience application errors: 'Instruction at "0x1a3c4b6b" referenced at memory "0x00000028" Memory could not be read.
View 9 Replies View RelatedPhotoshop :: Old Dusty And Yellow To Pure Black And White
Feb 1, 2006Anyway I'm trying to create an image that's supposed to look old dusty and yellow .. as a result of the centuries that passed since it was written.
The image is supposed to be purely in black/white.
Any good ideas on how I do this?
Photoshop :: "Paths" Or "Curves"
Oct 31, 2005I'm having a heckuva hard time figuring this one out.
At the bottom of my canvas, I have a half-circle, with the curve facing up and the flat edge at the bottom border of my canvas.
At the top of my canvas, I have some text that is actually a graphic instead of text.
I'm trying to make the picture of the text curve to the same arc as the half-circle at the bottom of the canvas.
Photoshop :: Getting Animation To Play When Someone Enters My Website
Aug 5, 2004how to get my animation to play when my website is first opened...much as this website does with it's really cool "PT" plasma logo...I've gotten VERY inspired by the animation example on this forum and want to animate something of my own, need to know how to get it to play in Dreamweaver though..
View 4 Replies View RelatedRevit :: Why Room Tool Doesn't Recognize A Simple Room Delimited By Walls
Aug 30, 2012I have a project in wich rooms functionality is compromised. I don't know why the room tool doesn't recognise a simple room delimited by walls whose property divides rooms is set to yes. If I place a rectangle of rooms delimiters the room tool works properly instead. If I start a new project the tool works properly.
View 1 Replies View RelatedAutoCAD Architecture :: Room Data Table And Room Tags Not Showing Up Going From 2013 To 2012
Jan 16, 2013I am editing an old file set up by another firm that is used by our clients to keep track of room sizes etc, which has a room data table and room tags tied to area polylines. It has worked just fine on our 2013 Acad Architecture, but when I sent them (saved down to 2010) back to our client, using 2012 Acad Architecture, the tags disappear and the table is unpopulated.It seems like it must have something to do with the file originally being created way back when, along with some quirk between 2012 and 2013.
View 2 Replies View RelatedPhotoshop :: "outer Glow"/"inner Glow" No Longer...
Aug 16, 2009I'm created a photo of an alien boy being beamed down to someone's house in a cone of bright white light from a flying saucer, and I tried to use the "layer style" to create the glowing light effect in this cone of bright light - but somehow I'm not getting the "glow" effect that I got before. I'm stumped as to what I'm doing wrong/not doing right to produce the glow effect. In other words, the outer/inner glow effect no longer works. Can anyone please help me?
View 2 Replies View RelatedPhotoshop :: "save As" Becomes "save As A Copy" In Action
Jul 14, 2005I've got a couple of actions that do various things and then as a last step do a "save as" (without a dialog). They work just fine on MOST images but on just a couple of images when they get to the "save as" step I get a dialog and the "as a copy" box is checked. It happens on the same images every time so it must be something about those particular images but I can't figure out what it is.
View 5 Replies View RelatedAutoCad 3D :: How To Make Oval Dish 15" X 12" X 5" Inches
May 18, 2012how to make an Oval dish that's 15" x 12" x 5" inches
View 9 Replies View RelatedLightroom :: 4.3 Stopping Processes When Mac Enters Sleep Mode?
Mar 26, 2013I have been finding that when i have a process running that requires some time to complete in LR 4.3 (e.g creating timelapses, or exporting large sets of images, or creating many 1:1 previews), that if my mac goes to sleep these processes stop. When I wake my Mac again these processes start up again though.
After a little reading I seem to have found that the latest mountain lion upgrade has removed a macs ability to check hard drive activity before going totaly to sleep. So previously the screen will be sleeping but processes can run in the background. If what I have read is accurate this is also true for downloads and other processes. Furthermore they go on to say that applications now have to create "power assertions" to keep processes running.
I assume Lightroom does not yet have these? Are they looking into it?
Lightroom :: Correct Way To Print A 16" X 20" Print On 17" X 22" Paper Using LR5
Jul 27, 2013What is the correct way to print a 16" x 20" print on 17" x 22" paper using LR5.
In LR4, using 17" x 22" paper, I used to set the cell size to 16" x 20" and print. Doing the same thing in LR5 gives me a slightly larger print.
Photoshop Elements :: Pull Up Picture / Blue Background Appears Behind Picture - Circle Enters Screen
Oct 7, 2012when i go into the editor and pull up a picture and blue background appears behind the picture and circle enters the screen. how do i get out of this?
View 1 Replies View RelatedPhotoshop :: "Photoshop Jpgs" Vs "jpgs." Files Default
Apr 28, 2006I have given a disc of photos to a client that she can't access without launching Photoshop on her Mac. They were scanned by me on an Epson as jpgs, then run through Photoshop (CS1) for touch-up and resaved as jpgs by me. Now I look under "get info" and see that they are all saved as "Photoshop Jpgs". this can be a big problem, as I intend to make a lot of discs for clients in the future. I don't want to have to tell them to use "Open with" every time they want to view a photo.
View 1 Replies View RelatedPhotoshop :: How To Create A "spot Of Paint" Or Whirlwind Image Effect?
Nov 22, 2006(using his Mac)... It ended up our logo and I need have to make some changes desperately (to adjust it for printing on shirts/ change the image for embroidery logo, etc.). Despite all my efforts to find out how it was created.
View 2 Replies View RelatedPhotoshop :: Scrapping "Layer History" Plugin I Made (Pic Attached)
Feb 23, 2003making a Photoshop plugin entitled "Layer History". What it does is provide History for each unique Layer (check out the pic i attached to this message). Right now i am not quite sure of its use to anyone out there and so i just wanted to ask all of you gurus what you think. I am just playing around in learning how to do plugins so dont think i am trying to go commercial or anything...please feel free to be as honest as possible! =)
Right now, i am able to capture pretty much anything about how a layer was created including brush strokes (as you can see in the snap). From there the user can move back in time by jumping to one of the previous states and modifying its content (while still maintaining later states) and thus creating a potential uniquely different compounded result. For example,i am able to say, select a brush stroke state (from the Layer History states panel --- the bottom panel of the 3 visible -- btw, the top-right two icons
toggle on/off whether the two other stacked panels which show "Snapshots" and "Folder Sets" appear as well so dont think they are on all the time...i left them on so you could see them ), and then select a different Brush type, Mode type, opacity which would automatically update the stroke inside the document to the new modifications, but also keeping the other states (possibly other brush strokes, etc) that follow it.
Right now it stores information about when the entry was made and allows for internal commenting, creating folder sets (you can select a group of states and organize them under folders for quicker access), color states based on type and by sets, reshuffle states, and modify them. Because the Layer history information can get huge (e.g. Brush strokes) i added in a compression technique while it stores Layer History information inside the PSD file (while saving) which seems to work quite nicely. Currently I also have a number of discard management options that can allow the user to select the # of states (or types of states) that can be in the window before they are discarded (or converted into a Snapshot). Notice the icon near the bottom of the pic on the left of the last "Brush Stroke" entry (its a gray arrow): Because subsequent entries may be the same e.g. multiple Brush strokes, it is able to know when more than 1 entry is of the same type and thus this icon appears to the left of the first of its type. When the
user clicks the arrow it collapses (hides) all states of that type (leaves the 1st entry though) thus clearing out space for the user inside this window. If the user clicks the collapse arrow again (now shown as an expand arrow) it re-expands the content revealing all the items of that type.
Is this program of any use to anyone? I am thinking of trashing it and moving on to another plugin...It was fun for my 1st plugin nontheless, but boy did they have a lot of bugs in the sdk. Though i actually made it compatible for photoshop 5.0,6.0, and 7.0.
When i think back about this Layer History plugin i guess no one would really find a use for it since no one has ever complained about needing one before and Actions, and History provide part of the solution.
Photoshop :: "the Configuration Data For This Product Is Corrupt" Installing Adobe
Dec 30, 2005Well this is the error I am getting when I try and install Adobe Photoshop CS 2 so I am at a loss as I cant find any help.
View 3 Replies View Related