I have installed Lightroom 1.4 and some reason it was not installed properly.
So, I tried o uninstall, it would not work.
I went to control panel and program uninstall ... it would not work.
I tried to reinstall and I get the message "Error 1714 The ollder version of Lightroom cannnot be removed. COntact your technical group.
Converting a RAF Raw from Fujis X-E1 or X-Pro1 cameras will result in a harsh blurry JPG. The inCamera-Raw-Conversation or the RAW-Converting from Fujis delivered software results are much much better.
I know, even with Canons or Nikons LR4 does sometimes a better or a worse job than the dedicated converters, but with the new Fujifilm Cameras it is unusable.
Adobe may know the problem, because well known camera reviewer like dpreview stated there point on this topic already in their reviews. Also Fujifilm itself told me they reported the issues to Adobe.
Â
My question here is, what is the current status? The new 7.3 or rather LR 4.3 do not give any improvements on this problem. Which is very disappointing, especially for early X-Pro1 owners.
I created a custom calibration in dng profile editor. I saved in both the global library and user don't see it showing up in light room calibration drop down only the built in stuff'
View 2 Replies View RelatedI have about 20 images that I was trying to Burn in a DVD but , I ended up getting CR2 Alias files with an arrow at the bottom left corner.
I want to open the images either in Photoshop CS6 or in Light Room 4 or in Bridge. How to open the images in jpg. or in RAW.
I need to upgrade my graphics card. Question can either Photoshop CS5 or Light room 5 utilize double precision capable GPUs?Â
Â
Background: Application- photographic RAW files editing (no video editing.) Software- Photoshop version CS5 and Light room version 4, OS- windows 7 64bit, Hardware- Asus P8P67 Deluxe LGA 1155, Intel Core i5 2400 processor, 16GB SDRAM, SSD (apps/temp files), HD (archives), current video card- Quatro FX 1500.
I am trying to create a Schedule that figures out Light Power density for each room. The first issue is getting Lights to register what room they are located in. The next issue is getting the room area parameter to show up in the available fields. It is funny b/c Volume shows up but not the room area. How hard could that have to been to add that to the available list since volume is there.
View 1 Replies View Relatedhey anyone know how to make the effect similar to when your have a dusty room and light enters through the window and you can see the rays?
View 1 Replies View RelatedI have a project in wich rooms functionality is compromised. I don't know why the room tool doesn't recognise a simple room delimited by walls whose property divides rooms is set to yes. If I place a rectangle of rooms delimiters the room tool works properly instead. If I start a new project the tool works properly.
View 1 Replies View RelatedI am editing an old file set up by another firm that is used by our clients to keep track of room sizes etc, which has a room data table and room tags tied to area polylines. It has worked just fine on our 2013 Acad Architecture, but when I sent them (saved down to 2010) back to our client, using 2012 Acad Architecture, the tags disappear and the table is unpopulated.It seems like it must have something to do with the file originally being created way back when, along with some quirk between 2012 and 2013.
View 2 Replies View RelatedI am trying to animate a casino-like light board made of tens of light bulbs/leds. I thought the easiest way to do it would be creating a matrix of bulbs arranged by material ID and then design a pattern in multi sub-object materiel so I could somehow scrub through it and achieve animation effect. The material modifier allows to change ID for the whole object only and MaterialByElement shuffle ID`s in a random manner.
[URL]
I am attempting to build a facsimilie enigma machine, I would like to know how best to create an effect so that when a key is pressed a corresponding letter appears to light up. Btw I am not looking for an animated image, I can take care of the transitions between on and off, I just need to create the two image states.
Attached Thumbnails
How do you lock the pivot point of a light to the light itself? I thought just adding a Axis node would move the light and pivot point but the pivot does not move. Is there a way of parenting them together?
View 2 Replies View RelatedHow do I use the standard Revit can lights in a wood joist floor with drywall applied to the bottom? If I place in a suspended ceiling, can lights light up just fine. However, if I use them in the floor space of a wood joist floor, the light itself gets covered with the floor. How can I get the light to cut the floor out so I can see the light when it is rendered?
View 4 Replies View RelatedI was wondering is there a chat room available for us. If there isn't a chat room might be a cool idea. A private one, by invite only....To keep weird people, bots, and general people who want to reck the professionalism that this forum offers. Just an idea..
View 9 Replies View RelatedI am doing a Marketing Course at Uni and part of my assignment is to design a shop how we would like it set up. I have drawn 2 pictures (with Pencil and Paper!) looking down on the shop from a slight angle.
Since doing this, our lecturer has told us that if we wish, we can use some software to also draw them, as long as we also hand in the hand drawn pics. As most of us don't know how to use Photoshop, we've been told that we can get someone to do it for us and we just have to make a note on our assignment of who drew them and what software was used.
Isn't there a way to make a selection of a piece of the bottom (or top), flip it and then paste a few times to make it seem as though the photo has more space (and is seamless-no line showing that the new space is a copy of a selected area from a different part of the photo) on the bottom?
View 8 Replies View RelatedGotta uninstall ps 5 to make room for ps6. Doesn't seem to work.
View 2 Replies View RelatedI'm trying to place a picture/wallpaper on one of our wall in our bedroom, about 174 inches (14.5 feet) wide by 94 inches (7.8 feet) tall using one of my pictures taken with a 3 megapixel camera. Using the max setting of the camera, I took a picture of river. I'm thinking of using this picture as a wallpaper for that wall.
The only software I have on my pc is Photoshop 7.
I shot an interior.  How do I get the lines of a room straight?  I used the straighten tool in the cropping area but one side get straight and the other is off.
View 16 Replies View RelatedWould anyone know how to achieve a frame like this in a dark room and is it possible to recreate from scratch digitally using photoshop or other software?
View 3 Replies View RelatedI operate on a Windows 7 platform and use LR 5. All my photos and LR file are kept on an external HDD with 1TB of space of which 600GB is available. However, I get the following error:
Â
Disk Space is Low
Â
Your disk "(J:)", which contains your Lightroom catalog, is critically low on space.
Â
Please remove file or empty the trash to make at least 20 MB available.
Â
Is there a setting that can be set or changed or how to I get the message to stop popping up?
I'm installing PS CS4 on Visat 64-bit. The first time I tried installing it the setup stopped when it was loading the Language pack for Device Central. I started the installation over again and removed Device central from the install and then started it again. This time it got almost to the end of install but it then stopped again when it was trying to install the Photoshop CS4 English Language Pack_x64.
Has anyone else loading CS4 had this problem in Vista 64-bit?
We have a copy of Adobe Creative Suite 2 installed on one computer that was recently hit with a trojan. The software is still on drive D and is intact. The software was activated a long time ago. Drive C had to be reformatted and the OS reinstalled because of the trojan. I'm trying to reinstall the software since the old registry is gone. I was just going to reinstall over the old version. Since this is an upgrade, it wants the Photoshop 5 CD. We don't know where this is, but we do have the old serial number. When we installed this a few years ago an Adobe tech had us enter a secret keystroke that brought up a box that we could enter the old serial number. I don't remember this keystroke. Q1: Does anyone know the keystroke to enter the old serial number instead of having it search for the CD? Assuming I can enter the old serial number and get past this screen, will a reinstall trash the activation? I do not want to re-activate the product since I assume it will not let me do so. The software was installed and activated on this desktop and on my laptop. I assume it will only let you activate twice. The activation directories are there along with the DAT files, howver. Q2: What can I do to preserve the current activation? And no I can't follow the instructions which would be to launch Photoshop and go to the Help menu and choose Help > Transfer Activation. I can launch Photoshop, but I get an error ""Your Adobe Photoshop user name, organization or serial number is missing or invalid. The application cannot continue and must now exit." The old registry is gone since the OS was reinstalled.
View 7 Replies View RelatedI purchased a Spanish language copy of CS4, having trouble installing the program. gets the following message:
The program says "es imposible instalar algunos componentes esenciales de Photoshop CS4, para continuar con la instalación presione Continuar, para detener, presione Cancelar"
"Some essential components of Photoshop CS4 are impossible to install, to continue installing press Continue, to stop the process press Cancel"
I have an original XP Windows interface (64 bits)
1,56 Gb in RAM working at 600 MHz
160 Gb free in HD
Intel pemtium 4
chipset Intel Brookdale Gi845GEV working at 2.8 GHz
presses "continue" and afterwards he cannot open photoshop because the components are not properly installed.
been trying to install Photoshop CS3 and having great difficulty, it will only install the shared components and nothing else, Ive gone through all the tutorials on the Adobe help pages and still not had any luck, I've tried looking through the log and the only thing I could come across is the following: [Â Â Â 5028] Sat Apr 11 00:41:19 2009 ERRORDefault installation language not valid, falling back to first supported language.[Â Â Â 5028] Sat Apr 11 00:41:19 2009 DEBUG couldn't find any info on the error code or anything, ive uploaded my installation log
View 12 Replies View RelatedI have just obtained Adobe Design Premium CS4 for Windows.
I currently have CS installed. I have lots of additions to Photoshop
(e.g., filters, and many brushes, CSH, textures, etc). What is the
best way to upgrade to CS4?
(1) Delete existing CS2 then install CS4? I prefer this to get a clean
install but do not wish to loose any of my additions.
(2) Install CS4, assuming that it automatically delete old version,
preserve customizations, and install the new version?
After installing CS4, shortly after its introduction, everything went well, sort of. The GPU feature wouldn't work with my older graphics card, I think. At least it wasn't one of the tested/supported cards.
Then, my D drive (storage and scratch), started not being seen, intermittently. After alternating the cables and moving the drive, to test it, with help, we determined the mobo might be the culprit. Anyway, I decided to do an overhaul, and upgrade my pc.
With the first re-install of Windows, using a quick format, Windows fought us, and Photoshop took 4, count'em FOUR tries to install.
After a week processing pictures, and fighting the occasional crash, which had never happened to me before, and the issues mentioned by others regarding GPU, etc., I decided to do it all again.
Did a full format of C, re-installed Windows, smooth as a baby's.....well, you know.
All running smoothly, so far.... fingers crossed, toes crossed, etc, etc.:)
Before the re-build, I cloned the C drive, as everyone says to do, after de-activating both CS3 & CS4. (BTW, I only installed CS4 on the 'new machine'. Before the 2nd go round and full format, I cloned the C again, to a different folder, both times on the D drive.
Now I'm ready to re-install PS. My questions:
Should I do anything with the cloned folder(s) on the D drive beforehand?
Should I do only CS3 and wait for anticipated patches for CS4? (CS3 always ran smoothly, never crashed, etc.)Or go ahead and install both?
Are there any elements of CS4 I should NOT choose to install?
If a clean install of CS4 occurs, with no hiccups, that is, am I likely to have fewer issues than the first time?
Are there any other issues I should be aware of, or things I should do?
As you probably can tell, I'm soooo not a computer person.
my new system has EVGA 750i SLI mobo, 9800 GTX+ graphics card, Intel core2 quad Q6600 processor, 4 GB OCZ Reaper 1066 memory, 600 w power supply, WinXP pro, 32 bit.
I had photoshop cs2 9.0 ((with imageready and bridge)) installed on my old windows XP computer and it's program size came up to 250 something MB. I recently got a new Vista computer and downloaded Photoshop CS2 tryout ((file size 362 MB)) and put in my old serial number and everything and it installed//activated online just fine. BUT the size of the installed program is now mammoth and much bigger! I checked it in the programs list in control panel and it comes up to a whooping 7.62 GB in size o___O;;
I just wondered what accounts for the significant increase in size as it's the same version I had before. I guess I'm just wanting to know if this is normal? Does it have anything to do with the settings i chose when installing the software? x____X;; sorry again if this is the wrong place to post this, I just don't know who//where to ask.
I have been using Photoshop 7 sucessfully for years but I have downloaded a trial version of Photoshop CS3...
I would like to install the CS3 on the same computer as the Photoshop 7. Will this be an issue or am I expected to uninstall the Photoshop 7 first?
I cannot find anywhere basic instructions to install CS3.
I'm trying to extend the edges of a number of images to give myself extra bleed room for print. The images have bits that are a little too near the edge and I need more room. The effect I'm looking for is repeating the final edge row of pixels for 1/8 of an inch beyond the original image on all side.
Â
The obvious solution, manually repeating the row of pixels is too time consuming for the number of images I need to format.
Â
The solution would have been simple if the imbeciles at adobe hadn't moved the "extend edges" option to the Oh-So-Useful auto lens correction tab in the lens correction filter. (how I HATE thee, Adobe)... Alas, I'm using CS5 and need an alternative solution.
I want get the rooms dimenstions, for calculating the width of the corridors.
View 1 Replies View Related