Isn't there a way to make a selection of a piece of the bottom (or top), flip it and then paste a few times to make it seem as though the photo has more space (and is seamless-no line showing that the new space is a copy of a selected area from a different part of the photo) on the bottom?
View 8 RepliesI am using Revit Architecture 2012 and I am trying to create a Room Tag. I have attached the file below. I want the tag to read the room name and the room dimensions. Then I would like an option to turn "Unfinished" on and off. I can get this to work as long as it is a type parameter. When I load it into the project it works well and everything is there. But if I change it to an instance parameter (which is what I want) then when I load it into the project the option to turn the "Unfinished" on and off has disappeared.
View 6 Replies View RelatedI have a 3D model from a floor of a building, with 20 rooms on this floor. I have 3D blocks inserted as furniture for each of the rooms and want to create elevations from inside these rooms looking at the 4 walls to show the layout.
How can I position the viewports within each of the rooms to give me a 2D Elevation?
I am creating a schedule to pick up the room areas and additional information to do with artificial lighting. That bit is the easy bit.
What I am trying to do is put a column in the schedule that shows how many light points are within that particular space. I have looked into ticking the quantity box, but that picks up just the spaces. If there was a way that this could be used to pick up the blocks in a particular space, and not the spaces that would be the simplest way to solve this (I think anyway).
Just to let you know, I am using Dynamic Blocks for the light fittings. As I can have all the different types within the one block. I have heard that I can do this using the MultiView blocks (I haven't explored this yet), but the amount of blocks that I need is going to be increased (from what I know about MultiView blocks). The simpler this is, the better I believe.
I have tried using Count under the Automaitc Property, but when used, adds the blocks as an extra row, not into the desired column. I may have to add something to the block to get it to do what I want it to do, but don't know how to do this. At the moment, I am putting this information manually into the space properties.
The next part to my question, and again, I maybe asking a bit too much here, but I want to take two totals from two different columns to create an average. If I could do this in the one table, fantastic! If I have to create a second schedule to pick this up, that is ok I suppose, but I would then do the math for it manually and just write it in if that was the case.
I'm using ACA 13
I have a project in wich rooms functionality is compromised. I don't know why the room tool doesn't recognise a simple room delimited by walls whose property divides rooms is set to yes. If I place a rectangle of rooms delimiters the room tool works properly instead. If I start a new project the tool works properly.
View 1 Replies View RelatedI am editing an old file set up by another firm that is used by our clients to keep track of room sizes etc, which has a room data table and room tags tied to area polylines. It has worked just fine on our 2013 Acad Architecture, but when I sent them (saved down to 2010) back to our client, using 2012 Acad Architecture, the tags disappear and the table is unpopulated.It seems like it must have something to do with the file originally being created way back when, along with some quirk between 2012 and 2013.
View 2 Replies View RelatedI want to create bulging eyes in a photo that i have. I would do this in photo paint?
View 10 Replies View Relatedtrying to recreate this vintage border effects for a lot of photos on my website.
i can make a template and adapt for each one?
I have been searching for a way to create a photo template, not a web template, but a photo template where I have a background, several layers with different stuff. What I would like to do is to have a couple more layers with cut out in different places where I can "insert" my pics. Different pics eact time. Is that really hard to do?
View 3 Replies View RelatedI am trying find out how to create photo album templates in photoshop and save them for future projects to using same template with different photos.
View 5 Replies View RelatedI'm trying to create a small bullet image with a transparent background that i can use on a gradient background.
I have a image with 2 layers. 1 for the image, and 1 for the background which I have tried either masking, or completing deleting. But when I try to save the image it retains a white background.
planning on designing some artwork for a DVD menu that we want to shoot some photos for. However, we want those photos to be in a specific style, namely japanese manga (japanese comics). I suggested the idea of shooting some pictures first, then editing them in Photoshop to make it look as though they were drawn by a manga-artist.
View 8 Replies View RelatedHow can I create a 16"x24" photo collage in PSE8 with 5 photos? I want 1 photo to be the main focal point and to be the largest and then 2 photos medium size and 2 photos smaller.
View 1 Replies View RelatedLoaded my photos into an album. I am trying to create a photo book for Christmas and have started working with a company other than Shutterfly because of page design offerings ? Can I upload an entire album to that company? I have tried and I am having difficulty. Do these photos need to be uploaded to that company in folders or must I upload individually or can I do the entire album at once? I am dealing with hundreds of photos.
View 2 Replies View RelatedI have tried to create a Photo Collage in PSE 11 but everytime I do, the program closes on me. I have tried in both Organiser and Editor.
It starts off OK and comes up with the sizes. I choose 297 x 210, the landscape option, which is not the default and the only other option is Basic layout - no other options available.
I then hit OK and the screen comes up with Adobe PSE11 has stopped working. Check online for a solution to the program or Close the program. I have tried to check online but it just closes anyway.
I have not created a document yet and would like some thought on how to do this: I want to use a continuous tone black and white image which is somewhat close to what would be a 'knockout' but with soft edges - so it gradates appropriately over the background image I want to use, making the black part of the image used as the mask become much of the effect of a gradient mask: the background image shows through whereever there is the 'black' and 'tone' of the image.
my first thought is to create a layer mask and then paste the black and white image onto that, but I'm not sure if that will work to accept the 'soft tones' of the image and work appropriately. What steps I should take to make this effect work?
I am starting to sell online and i would like to be able to cut out the images on photos so they have a completely white background.
View 5 Replies View RelatedPhtoshop CS3 had a function, filter, script or something that produced an HTML page or code that allowed you to post the image, view it in a browser and you could, "click to view larger image" but photoshop produced some extra code that would also allow you to zoom in on this image.
View 2 Replies View RelatedHow do I create a simple 4 photo collage with 4 different pics? Not looking to waste time with all the collage layouts and moving stuff around.
View 3 Replies View RelatedI am trying to create a FB cover photo in Photoshop Elements. I have a background color. I am inserting an image on top but it is not blending with the background color. The image has a white space I want to send to the background. Can not figure this out.
View 2 Replies View RelatedI am using Photoshop Elements 10, and in Organiser I am creating a photo slide show, but when I come to burn the slideshow to a DVD, Help seems to indicate that I can only burn the slideshow using the Premier edition.
View 3 Replies View RelatedI have photoshop elements 7.0 and I am having difficulty making making a photo with a transparent background. According to the tutorials I watched, I am supposed to bring the desired photo which I do and can be seen on the right in the layers box dialogue. Then there I create a copy which is "unlocked" which shows up on my screen. Then, I select the brush tool and I select the areas of the photo which I wish to make transparent and then hit the letter "D" on my keyboard, or the delete button. Although the background is seen gone in the photo in my layers box, the background is still shown in my photo on my screen. The perforated lines are seen and although I keep pressing the D button it does not work.
View 1 Replies View RelatedI would like to create a wallpaper in 2560x1440px. When I try to make a photo collage there are only 3 different sizes I can choose. How can I add a custom size?
View 2 Replies View RelatedCreating web photo galleries?
View 2 Replies View RelatedI was trying to make an animated GIF with 30 static GIF images I made with PhotoPaint X5 itself.
The crash happened every time I tried to close the program without saving the animated file – which I couldn't make due to not achieving what I intended (I'll have to learn a bit more about background and objects).
It happened on a 64-bit Windows 7 Professional system with 12 GB of DDR3 RAM.
i am interested doing a galaxy background for one of my photos. i don'y know how to create another backorund for my pic but and i was wondering how to, and also i am wondering if it is possible to make is so like you can't see anything from the original background. This is the galaxy background i would like to use
View 5 Replies View RelatedHow do I create a gradient with paint.net with a photo - a landscape photo, from white on the left going darker to your right with colors being more prominent on the right?
View 2 Replies View RelatedI am trying to animate a small thing. A smiley face which bounces up and down. I have set it all up etc. but when I preview nothing happens. On the right hand side, in the movie docker, it shows the correct frames, (all 6 of them).
In the main window, when I click through the 6 frames, they are all frame 1. And when I press play, nothing happens (it says processing in the bottom corner, and keeps filling up the bar and starting again (assuming it is playing, but playing the same frame repeatedly?)
Not sure what to do with it? When I saved it, and opened the file, it kind of worked, all though frame one stayed there throughout the animation, the others did appear and do their thing, just behind frame one.
I am trying to create a textured Mask from a photo of a floor & am having problems. I am following this tutorial: [URL] ...
I have performed the following steps but am unable to select&delete any of the white areas in the Live Trace and am thus unable to create my Mask:
Live Traced > Default
Select > Same > Fill Color
I have been able to make a trace file in grey scale but can't seem to export to a .dxf file. When I do the file show a size when I do a properties but shows noting when I import it to EZCAD.
View 1 Replies View RelatedI am trying to use corel draw x5 to create a template for a photo frame. I want my inside rectangle to be used as a stopping point for my images so the engraver doesn't engrave in the blank area in the middle of a frame.
View 1 Replies View Related