i am wanting to do is enlarge a gif or jpg to about 4 feet tall and print it.
i have seen this done were it breaks up the pic into sections and prints each section as a different page that you cut and paste together,
I have a small problem, trying to print from R 2013 some pdf's of a long section of a building...aprox 30 m.With a scale of 1 to 20 ,,,the pdf just looks bad and unclear when you get to zoom a little bit in it.What am I doing wrong,although I use settings like highg quality pdf and so on.
View 1 Replies View RelatedWhen i attempt to plot some layouts to adobe pdf, they are coming out with sections that are blank. They are scattered around the drawing but the drawing content is missing. when i use the built in pdf creator, it is shifting some things around to where they don't belong and i can't have that!
View 1 Replies View RelatedI am photographing and cataloging the paintings and drawings of an artist. There are over 3,000 of them. LR is such a good database that I am hoping I can use just that and add the details into the IPTC data - Title, Medium, Date created, Size, Price, whether sold and to whom, and - crucially - which shelf in the artist's store building they are located.
My idea was to use SlideShow Pro to publish the catalog to the web for dealers to browse, and my experiments show this would work very well, with IPTC data available on mouse-over.
I also need to produce a catalog with images and info for the artist's assistant so that she could quickly locate a requested painting on the correct shelf. Again this seems feasible up to a point as it is possible to print out the photos with IPTC information.
BUT - and here is my problem: I do not want all the info that the artist's assistant needs in the catalog to be available on the public slideshow, so have put different bits of info into different IPTC sections. But then I come across the limitation of printing in LR - only one section of IPTC info is allowed.
As it is I am at the moment also entering the info into a database (File maker Pro). I find on a good day with the wind behind me I can crop and adjust and catalog about 30 paintings an hour in LR. Also adding the info to File maker nearly doubles that. And more importantly it will be clunky and prone to error to have to alter or add to two separate databases in the future.
In LR4 print module the print and print one tabs are greyed out and I can't reset.
View 1 Replies View RelatedI need to create a positive space triangle in photoshop. I know how to create a triangle and fill it with colour but I don't know how to make different sections within that shape so I can assign different colours to each section (a positive space triangle has horizontal bars of each colour of the rainbow inside it).
View 3 Replies View RelatedI made a big image with the intention of cutting it into sections the size of A4 so I could print and put back together after wards. Could someone help me in cutting the image into equal 28cm x 20cm sections. The whole image is 114.794cm x 800cm.
View 2 Replies View RelatedWhen i am designing a layout and i want to put the sections on the left side or the right side with a nice font and blend or filter for the name of the section if the size that i have to work with is limited and i have a lot sections how do I add those sections if the canvas I have in photoshop isnt big enough to put all my sections?
Also, do i just put the name of the sections right under eachother and then slice some sort of content box under them or do i space them out a little bit to put a content box? These parts are really confusing me and I have been trying to figure it out but i cant.
i was working in Photoshop CS5, and all of a sudden my file appeared as above.
I am working on a multiple layered file and sections just instantly became removed from each of the layers in different spots.
I tried restarting photoshop but its still the same.
I'm running a Windows 7 64 bit system with 6gb of ram. I am using PS CS6. Every time I open an image there are large blank squares in it. I can fill in the squares by clicking in the area using the "Move" tool, I would of course to just have my images open the way they should.
View 4 Replies View RelatedI have a flame image. And in between all the flames was black. I made them all white to help me out a bit but now i don't know how to delete ALL the white.
going around all the flames with a lasso?
I have a simple GIF image in Photoshop 6 that is a line drawing of New York State. The background is transparent, the ouline is black, and the interior is white. I want to use this image in another application (FormDocs), but there is no way I can insert it with the transparent background.
FormDoc says that transparency is only supported if the image is Enhanced Metafile and if PhotoShop can save it as an Enhanced Metafile with transparent sections, FormDocs can properly display it. This file format is not available in Photoshop's Save As drop-down and no Copy - Paste Special combination works. I've tried everything I can think of, but I can't get this image into FormDocs with a transparent background.
I've been through the Help files, all the menus, etc. Although I'm relatively experienced with PC applications, Photoshop is a very complex application for a person who does not use it on a daily basis and who is not graphics-savvy.
I want to crop a square section from an image, using the rectangle tool, under options i choose square but then it blacks out the section of the image and is not movable, in PSP7 when doing a similar action, this square part of image is movable, how can i make this the same in photoshop?
Or is there a different action that i can use?
When dragging and dropping a video from Photoshop to Premiere to burn a DVD, one of the videos is split into several sections. How can I restore the video to one complete item?
View 5 Replies View RelatedSo I am working on this document and it has silver background. I go to print preview (Photoshop cs3 and cs4 on Vista) and I get color looking more like bronze looking but when I do print, it comes out just like it should (in working mode which is Monitor RGB with Proof colors checked).
This setting is the only one I've used to make sure image/psd looks exactly like what it should when printing. I tried the default Working CMYK with and without Proof colors but it's still showing me the bronze look instead of silver. I've looked on the net and no exact easy fix for this was found. I really really appreciate any help.
Another simple question is regarding size. I'm working on a document size of 17.5 x 8.7 inches and the actual Banners will be printed at size 175 x 87 inches (5 banners each at 35inch wide but combined into a big one). So essentially, I'm working at 10% the size of what the final print will be and my file size is 760mgs. You can only imagine how big the file would be if I work on the actual size.
When printing from PS CC using the print dialogue box I am getting a severe red shift in the final print. When I print the same image from PS CS5 or CS6 I get a color-correct print.
I am running a MacPro with OS 10.7.5, and printing to a Canon iPF8300 with its latest firmware and print driver. I am using the proper ICC profile for the paper. In the print dialogue box, I select "Photoshop Manages Colors".
A couple things I noticed: In the "Print Settings" where I dial in the printer setup, the settings for "Color" are both turned off (Colorsync & Vendor).In the printer driver settings (still within "Print Settings") the "Color" tab is grayed out, but when I click the "Settings" for that sub-panel, Colorsync is selected.When I printed the image from the Canon PS Plug-in, the red cast was gone, but the blacks were too heavy (there is no "Black Point Compensation" check box available because the Canon plug-in uses Adobe Color Engine for that, and it's only 32-bit and won't run).
I closed the Key Tag section and do not know how to get it to reappear on the screen? How do I do this?
View 2 Replies View Related-PC based system running Windows Home Premium 64 bit8 GB ramLots of hdd spaceCS5.5 Master Suite
-Epson Sylus Photo R1900
Operating system, CS5 suite and printer drivers all updated.
When attempting to print a photo, it can take anywhere from 5 to 15 minutes for the print dialog box to open up. It takes SO LONG that it appears that Photoshop has frozen, but it has not. The print dialog box opens eventually. This started about 2 months ago. I have looked at all preferences, assigned more RAM to Photoshop, uninstalled and reinstalled the entire suite, ran all updates, uninstalled and reinstalled the printer drivers - all to no avail.
I am at a loss as to why it would take SO LONG for the print dialog box to open after selecting print? I thought there may be a problem with the print spooler or print queue, but the slowness happens BEFORE the print back system is touched. The print queue is empty, and there is nothing stuck in there. I've checked.
I'm having trouble printing in Photoshop CS2. Rregardless of which printer I try to print to, I get the message "Could not print because of a problem writing the print file". I have never encountered this error before.
The psd file I am printing is a wall banner, and is quite large (~200MB). It contains elements copied/pasted as pixels from Illustrator CS2. However even if I flatten the file, or save as a flattened tif, I still get the same error message.
Thinking that the psd file is corrupted, I tried printing an earlier version of the file, with no luck. I've even tried printing other, small unrelated files, and can't print those either. Even after rebooting the computer.
The computer I'm using has a dual core processor, 4GB RAM, a decent graphics card and is running under XP. I have gob-loads of HD space and also use a scratch disk.
I really only want to print the file myself as a proof. However, I'm concerned that the banner printers won't be able to print the file either.
I have Windows 8 and am new to Elements 11. How do I get print to completely fill a 4 x 6 print paper?
View 5 Replies View RelatedI have trial version of Elements 11; Also have full version, but have not installed yet, as I wanted to wait until I completed current project. I created/edited an album of wedding photos in the Organizer. I tried to upload album to Shutterfly to make an archival DVD and also make a photo book in Shutterfly. The photos uploaded individually to the Shutterfly print page to print individually, but the album will not upload to My Pictures, it shows the album name, but it is empty. How do I get the photos to upload?? Shutterfly was not sure how.
View 1 Replies View RelatedWhen I print sections of Help, italicized words become jumbled and intelligible. They are usually "Note" paragraphs which are normally significant information. Both printing to my default printer and a PDF creation program have failed.
View 3 Replies View RelatedUsing a Mac, what is the best way to print multiple images on a 4 x 6 print in Photoshop Elements 11?
View 5 Replies View RelatedI use CS6 on a Mac pro os 10.8.3 & print to an Epson Pro 4900. If I print an image via LR4 print module the print comes out at 12 X18 in. Recently I have tried that same image via CS6 and the print comes out at 6 5/8 X 8 1/2 in.
In Print Settings in Printer Setup in the print module of CS6 stats "Super A3 / B 13 X 19 but the printed image dimensions are a little over half of that.The printer used to print normally in CS6 print file.
I've been using Photoshop CS3 for awhile and printing fine. I just updated my print driver (Epson 3800 to version 6.5) as well as my graphics driver (NVIDIA GeForce 8500 GT)at the same time. After rebooting I cannot click on the Print menu selection to print. IE: When I click on Menu the Print option is greyed and not selectable. Print as well as Page Setup, and Print One Copy are all greyed out (not selectable). I rolled back my graphic driver and rebooted and it still doesn't work. I then upgraded my driver again and it doesn't work. I've opened jpg's as well as psd files and no matter what file I open the Print menu's are greyed out. I can print from Word and other programs. I also reset my preferences (con-alt-shift) and still can't select print. I've done everything but uninstall. I'm hoping not to do that. My computer is on: Vista Ultimate 32 bit SP1, 4gb ram. In addition to updating the print driver and graphics driver I updated: Ultimate Extra Sounds, Group Policy Preference Client Side Extensions, Samsung CLP-310 Printer driver, and Microsoft Tinker.
View 4 Replies View RelatedI am not able to find the proper folder in Windows Vista for installing additional actions.
My folders are as follows:
C:ProgramFilesAdobePhotoshop Elements10.0Localesen_US - (at this point there are 4 folders below but not one that says Workflow Panels)
notice the differences from what the other forum entries state:
C:ProgramDataAdobePhotoshop Elements10.0Localeen_USWorkflow Panelsactions
We just upgraded a project from 2012 to 2013. After upgrading, there are two floors which do not show up as cut in any sections (they displayed correctly in 2012). The two floors in question appear in the section, but not as cut elements (no cut pattern) and it is showing edges of the floor that should be well behind where the section is cut. One floor is 8" concrete and has been made to slope using the modify sub elements command. The other floor is a variable thickness floor modified in the same way to be the earth below the concrete floor since the topo is not nimble enough to follow the shape of the concrete floor.
I tried remodelling the floors. No luck.
I can model it in a separate file, cut sections in that file and have it display correctly. If I insert or paste that into the main model, it goes back to displaying incorrectly.
Our structural engineer had copied the lake floor into their model which is linked into ours, so I deleted the lake floors in the structural model, reloaded it and then remodeled the floors again. And it worked... in only one of the dozens of sections that show the lake floors! So that's one more than before...
In one of the attached images you can see the sloping lake floor and the earth floor below it as it should appear and in the other image you see them both in elevation rather than section. The 3d image shows the lake floor and the surrounding "earth floors". The center of the lake floor is 7'-0" below the outermost perimeter of the floor.
I have a structural model linked into my architectural and I cannot seem to cut the link in sections. All I can see is the 'elevation' of the link whilst my architectural cuts. I have the link set as by host view and the view extents correct.
View 4 Replies View RelatedI am digital printer and I am running into an issue printing an .EPS. I can open the file in AI ( I've used AI5 and 6) and all the layers are the layers are there and good. The only this for some reason the file has been cut into a pile of clipping masks and groups. I think all those layers and sections are causeing wierd transperancy issues. Any way of possible flattening the whole thing? I am attaching screen shots of what the file looks like .This is what it looks like with all the objects selected in AI5 this what the layer pallete looks like this is what it looks like as a pdf. Notice the outlined boxes. They shouldn't be there. When printed the bottom right square, the one with the play symbol in it, comes out discolored. Also there is a discoloration behind the stacked white items.how to unite all those sections?
View 1 Replies View RelatedAdobe Colour Management Print defaults seems to be assigning RGB meta to B&W pages and incurring Colour Print charges for B&W prints.I can manually change the print colour management to Printer managed on a per print basis instead of the default adobe colour managed which "cures" the issue but I do not seem to be able to save that setting as the default.
View 1 Replies View RelatedI have a 3d topographic survey plan. I need to take sections at various locations and would like to know the best way of going about this.
I am used to working with solids and so would normally just take a section plane but this won't work as the 3d topographic survey plan I have is made up of polylines.