my pen tool is doing the opposite of what i want! im trying to cut a baseball player out so i can past on another document but it's doing the opposite and it's deleting the person and leaving the back ground as below pictures are showing. i want the pen tool to cut the object out and delete the backgorund but its not working for me!
View 4 RepliesIve been messing around with the variable width tool, Im not sure I i changed something, I did try to restore defaults but when I make a change it changes the opposite side of the image. For example In screen shot I changed the width on the left and the effect showed up on the right.
I would like the width to change where I change it.
I want to create the opposite of 'simulate pressure', that is when stroking a path, I want the beginning (and end) of my line to be thicker and in the middle smaller..
how can you do that with PS 7 ?
I have been a long time user of Photoshop Elements, I think since version 2 or 3. I went from 6 to 10 earlier this year and have been working with a Trail version of 11 for a few days now. Overall, I like it, but like so many companies do, when they address a major concern of a large group of customers, they go too far in the opposite direction.
Two major complaints about PSE up through 10 are that it is A) too dark and B) the control icons/text are too small and difficult to see. This is mostly a complaint of the visually impaired. (Which is an interesting side-discussion, given that photography is a visual art).
Although I liked the dark layout, I tended to agre with most users about the latter complaint. The icons and text were difficult to see even for people with good vision. With PSE 11, I see the exact opposite, the layout is too bright for my tastes. After all, the purpose of this software is to work with images. A dark layout lets me focus on the image itself, and not be distracted by the controls.
That much I can adapt to, but the bigger problem is the screen real estate taken up by the Tool Options. It's HUGE! Especially when working with images in a vertical format, which represent a significant percentage of my images. For example I love to play around with vertical panoramas, an often overlooked way to capture a scene such as tall trees, buildings, etc.
I am finding myself constatnly havign to toggle back and forth between the Tool Options bar, and even with the F4 keyboard shortcut, it's a pain in the butt.
my opinion is that Adobe fixed a couple big problems for a lot of users but went too far and created a different set of problems for many other users.
I'd like to see an option between dark and light layouts. Let users decide. Kinda like making the program skinnable, but not all that many options are needed.Or... how about an auto-dimming feature? When the mouse is hovered over the image area, while working with the various tools, automatically dim the surrounding panels and menu bars. Then, when you move over the panels and menus, they would return to normal.Second, find a better solution to the Tool Options bar. Either make it A) moveable, like the other panels, B) resizeable, or C) auto-hide it.
At this point, I've almost decided that the size of that Tool Options Bar is a deal breaker and I won't upgrade. Vertical real estate is hard enough to find on computer monitors and Adobe took up 25% of what little I had. I'll wait for a future version to see if they take it back the other way.
After a reinstall of 5.5 I noticed the secondary drop down menus open on the opposite side of the arrows.
View 5 Replies View RelatedIs it possible to set a clone source point which moves in the opposite direction of the cloning route?
View 4 Replies View RelatedI'm trying to add an effect on a piece of scenery I filmed and I need the opposite effect of Fish Eye. The camera pans right to left and I need the edges to curve in/up to give that "rounded feeling"
Also, I would like to give it a cinematic look. I can add the bars top and bottom?
I just started working with 3ds Max this week and am having trouble pulling 4 vertices in one direction using Vertex selection along with the Uniform scale selector. When I try to pull them along the x-axis, half the vertices go in one direction and the other half go in the opposite direction.
View 1 Replies View RelatedI want to make a ring of polygons on the outside of a polygon-like the inset function when you get to >=2, but without all of the twisted polygons beneath it. Is there a way to do this using a tool, or do I have to manually add them myself?
I can make the larger radii on the connection pieces. Untwisting the polygon (rotating it -180) and then extruding/hinging works, however is there an easier way than that?
I was wondering if you have to solid objects and then use UNION command to make them as ONE object BUT then I don´t after a while you realise that this was a mistake is there a command that you can use to split them as they were before (beside from command undo or slice).
View 5 Replies View RelatedI needed to know the Side Opposite so that I could subtract that amount from a known line length.
I knew the angle (24) and the side adjacent (.9375) therefore SIN 24 = X/.9375 .0467= X/.9375 = .3813
When I measure the side opposite I get .4172
See attached screenshot.
I have an image of a car with a view of looking from the back and to the left, i.e.
[URL].......
I would like to change the view from the back and to the right. Does Gimp have the functionality to do that.
I want to move two opposite anchor points in opposite directions so that they are equally spaced. So if I have one anchor point I want to move right and the other left how can i make sure that they have equal spacing apart without having to resort to rulers. Is it possible to select both points and get them to move in opposite direction together?
View 4 Replies View RelatedI have managed to reflect objects but cannot manage to reflect one object across the Artboard to show up on the opposite side. If you see my image below, I would like to reflect the horizontal stripe at the top of the design and make it appear at the bottom of the Artboard so it finishes the design. Almost all of the work I do requires only one quarter of the design to be created, then I could just reflect it across and then reflect it down so this would be a useful piece of knowledge
View 1 Replies View RelatedI am having an issue in trying to get my hole axis to offset in the opposite direction. In the image below I want the slot to be centered on the hole. I can get it to offset moving the slot to the left, but can't get it to go to the right. I have tried a negative number, but both positive and negative move it to the left.
View 7 Replies View RelatedIs there a tool to mirror objects like there is in Max inside Maya? I am trying to copy my rig controllers to the opposite side but I cant find any tools to do it in 1 click...
View 1 Replies View Relatedhow to make the fillets goes the opposite direction.I want the fillets to round the edges not join the edges together
View 6 Replies View RelatedI have a dynamic block for HSS column. Previously it was always 1"x1" and I would just scale it to the proper column size I needed. Ignoring the wall thickness.
But if there was an asymmetrical HSS (i.e. 4x6) the wall thicknesses and radii of corners would look funny.
So now I want one that has Stretch Actions to change the size of the column. I added a Stretch to one side, then the other with distance multiplier of -1. But as you can see on the attached, the Linear Parameter baseline doesn't stretch. I want to have the Parameter Distance the actual full width of the column so I can change the columns with the Properties Palette. Otherwise, I would just start the Parameter from the center of the column.
I am trying to draw a sun-like shape. I started with a star polygon and apply the Twist effect. That gets me pretty good arms on the sun, but I'd like for something a bit more flame-like, so I'd like to get the arms to now bend back in the opposite direction. Is there any way to use or modify the Twist effect so that I can apply it a second time but bend further out in the opposite direction? Or is there some other good way to get the rotation along all the arms.
View 6 Replies View RelatedI need to mirror a feature to the opp side of a part, then supress the parent feature. Can this be done?
View 5 Replies View RelatedI made internal gears with design accelerator.
It's calculation is OK. And drag it,the rotation is good, But the direction is opposite. The tooth's move opposite direction to each other.
I used Autodesk Inventor 2013, And sp2, update DL22436649.zip But, this appeard before And after sp2 patch.
I made a half section view and it cuts what's above the plane of section in the Z direction, i mean all that's above this plane.
I want it to cut everything that's underneath, below the plane, at my choice, so i can inspect everything what is above the plane of section.
I have a formed beam I would like to mirror in an assembly to avoid the work of forming the opposite bent part. I have mirrored it however the cuts in the lower side of the beam are mislocated as if the part were rolled over rather than mirrored.I am in Inventor 2012.
View 9 Replies View RelatedI'm detailing a simple square plate with a good number of holes in it. I create an ordiate set running vertically along the LH edge and select the holes that are close to that side. Origin is the lower LH corner. Works great, easy.
The holes that are closer to the RH side though I'd like to show on that side. So I go to create a second ordinate set for the RH side and choose the lower RH corner as the origin and choose my holes that are close to that edge. The 2nd set will automatically show a second "0.000" dimension on the bottom edge and I can't supress it by right clicking.
Is there a better way to do this? What I've done now is to not use a set but just choose ordinate dimension and go from the opposite edge, which works.... But alignment is better with a set.
I have created a linetype with the text GAS OPTION in it. The line is continuous with a break around the text. In a straight line the linetype works fine (breaks around the text etc). However, when I use a polyline and spline the line for a curved line the text aligns with the direction of the line at the start, but when the line bends, the text suddenly changes direction and reads in the opposite direction. It looks like AutoCAD is trying to keep the text upright rather than following the direction of the line. When the text changes direction it also changes its insertion point and overlaps the continuous part of the line. I have 2013 AutoCAD.
Here is the string I used for the linetype.
*GAS_Option_LINE,Gas line ----GAS OPTION----GAS OPTION----GAS OPTION----
A,8,-15,["GAS OPTION",STANDARD,S=2.54,U=0.0,X=-2.35,Y=-1.27],-12
Just recently upgraded from Photoshop CS5.5 64bit to Photoshop CS6 64 bit. Crashes when using burn tool, crop tool, or dodge tool?
View 2 Replies View RelatedIs it possible to create folders within the tool preset panel to group tool presets, instead of having a long list?
View 2 Replies View RelatedIn ps7 editor I can have 2 pictures cascaded and using the marquee tool and the move tool insert a section of one picture into the other. I cannot do this in ps11, what am I doing wrong?
View 3 Replies View RelatedI have CS5 for Mac. The crop tool from the left vertical tool bar mysteriously disappeared.how to get it back...
View 2 Replies View RelatedThe brush tool loses the outline of the tool as the diameter gets larger. e.g. at 175px there is a fill outline of the tool. At 200px only a semi-circle is shown.
View 6 Replies View RelatedIs there an Adjustment Tool or Graduated Filter Tool in Camera Raw for Photoshop Elements 12?
View 2 Replies View Related