Photoshop :: OpenGL CS5 Died After CS6 Beta?
Jun 17, 2012
Using Ps CS5 12.04 on win7x64, 12GB, Radeon 6780 1GB, dual HDD and dual monitors since last Oct when I bought this new PC and its always been fine with openGL even with extensions added and dual monitors in workspace setup.Still worked same most of the time while I also had CS6 Ps beta installed and running...CS6 always ran openGL et al in advanced mode just fine.
Â
But when beta ended I uninstalled CS6 beta (correctly following Adobe advice)...and now CS5 does not run openGL...unless I reset prefs (ctr+alt+shift) at startup...then it runs fine. I can even switch to my custom user workspace and it continues just fine (except certain prefs are now reset...like second hard drive use and mouse wheel zoom etc.) until I close Ps.
Â
But when I close and restart Ps for next session; the setup starts as left but openGL not running again. It is a repeatable startup cycle if I want the advantages of openGL.
Â
I tried deleting/turning off all (2) extensions except Kuhler (may have to try that) (I have no plugins in x64). Made no difference.
View 4 Replies
ADVERTISEMENT
Aug 8, 2008
i have PS CS3 with 2 licenses. one is activated on my laptop. the other was activated on my desktop PC. however, the previous hard drive on my desktop PC died.
i now have a new hard drive in it, but it won't activate PS unless i deactivate the installation on the hard drive that died.
what do i do to activate PS on my new hard drive?
View 1 Replies
View Related
Aug 19, 2013
How do I transfer CS2Â from a Vista pc which has died to a new pc running windows8
View 1 Replies
View Related
Oct 25, 2012
The very weird error message (who comes up with these lines lol) my computer is unable to connect to the other render-computers to aid in DBR
i added a scr of my windows firewall, the Network rendering is allowed through so i don't really know the problem
I added the ip adressses of these computers in the list to select but no luck.
oh and we're using Norton as an anti virus - BUT: the network manager works fine, we can send out files to be rendered on other computers
Intel 7 - 2.8Ghz
NVidia Quadro 4000 2Gb GDDR5
8Gb RAM
3D Studio Max Design 2013 x64
Windows 7 x64
View 4 Replies
View Related
May 17, 2012
There seems to be an update available for PS CS6 but I keep getting the message:"Adobe CSXS InfrastructureCS6.. Update is not applicable. Error Code: U44M1P28".
View 10 Replies
View Related
Jun 13, 2012
I checked the FAQs and found general instructions which presume there is an entry in W7 Programs & Features. There is no entry in my system, and I found no Uninstall app in any Adobe CS6 folder.
View 4 Replies
View Related
May 28, 2012
I installed Photoshop CS6 Beta and I just removed it using the uninstaller under Applications/Utility/Adobe Installers/Adobe Photoshop uninstaller alias. I had to find it myself as the information on the Web is wrong. Obviously I am on a Mac (Lion 10.7.4), but now that it has been removed, I still have an Adobe Photoshop 6 Beta folder in Applications that was not removed. Do I just delete the folder or do I need to do something else?Â
Â
I did find the Adobe Creative Cleaner Tool but I also have Adobe Photoshop Elements 9 installed. Can I use the uninstaller tool and not damage the Elements installation? I just want to be sure before I jump. I do have a full, bootable backup of my installation just in case something goes wrong.
View 1 Replies
View Related
Aug 11, 2006
Recently the updater on my version of CS2 started telling me that there was no internet connection, and to check my firewall and connections. Having recently installed a new firewall I spent some time checking that out, together with various other pieces of protective software. Despite ensuring that the CS2 applications (including the updater EXE) had the necessary permissions, I still wasn't able to automatically access the Adobe updates.
After puzzling for a day or so, I checked back on installations and changes to my PC over the previous couple of weeks, and realised that I'd started to try out Internet Explorer 7 Beta 3, at about the same time as I'd installed the new firewall. After removing the IE7 update, and returning to IE6, the Adobe updater started to function again.
I did a quick search to see if anyone else had posted regarding this, but couldn't find anything, so thought I let you know in case anyone else is thinking of installing Beta 3. I have emailed Microsoft to make them aware.
View 1 Replies
View Related
Jan 26, 2009
I'm unable to install Adobe CS3, CS4 on Windows 7 Beta x64. When I open "Setup.exe" - Windows shows error window "Adobe Setup has stopped working" and offers me to send more info about this problem.
How to install it?
View 14 Replies
View Related
May 9, 2012
Prior to seeing or reading the bright red warning of not trashing the beta, it was done.
Â
Now CS6 won't install. Says an earlier version is on the machine.
Â
Which specific files must be uninstalled to allow the CS6 installation?
View 7 Replies
View Related
May 27, 2013
Tried to install CC cs6, message is "failed, remove beta version first." Can't find beta on computer??? Can't try again, same message appears again.
View 4 Replies
View Related
Dec 30, 2008
I am starting to have system instability....BSOD 0x00000024 / 0x0000001E, warm boots before the login screen, and weird behavior like the NTFS file system not working ( causing corrupt saves ), superfetch shutting down, Photoshop minimizing - maximising then windows shutting down........Odd
A virus is not out of the question but before I reformat etc I was wondering if the Beta Wacom drivers has caused any issues on other systems. Looking at the reliability records the graph is pointing downward exactly at and after the date I installed the drivers.
Just troubleshooting....
OS Vista Ultimate x64 SP1
CPU intel q9650 3ghz
Motherboard Asus p5q deluxe
Memory 16gb (4x4gb) OCZ PC6400 C5
Graphics Card Nvidia 8800GTS 640mb
Sound Card on board
Monitor(s) Displays Eizo CG301w, Dell 2407
Screen Resolution 2560 x 1600 + 1920 x1200
Keyboard apple slim aluminum jobbie
Mouse intellimouse
PSU ocz 600w
Case coolermaster stacker
Cooling many fans
Hard Drives Raptor 74gb, Raptor 150gb, 500gb x2, 320gb.
Other Info Wacom A3 tablet, Epson 3800
View 14 Replies
View Related
Mar 19, 2007
Is this happening with anyone else? I am running Bridge and it is WAAAAY slow, sometimes 15 seconds to bring up an image from the film strip view. Tagged a couple with a green tag and it's taking forever. Nothing like cs2 that runs great.
Also, right after I installed CS3, I found "mDNSResponder.exe" on my hard drive.
View 3 Replies
View Related
May 3, 2012
When I have a PSD file, and try to save it, It will now let me save it as an JPG, CS5 did. Even after flattening the image, I often find it does not work instead of saving it as JGP as wanted, it PS changes it to IMG.
I have just had the same trouble trying to save to PDF, PS changed the extension to JPF, I eventually found a work around, jut kept ging down the list of files, until PS decided to add the PDF extension I was after.
I have tried to completely remove CS6 and re install it, no difference.
View 3 Replies
View Related
May 1, 2012
Generally, i think the new crop tool is pretty good. However, i'm having some problems with predefined sizes / areas.Let me try to explain:
Â
1. For example, I have a scanned image that is 26.14 x 20.32 cm @300ppi
2. I have defined a size called 'Half Page' which is 23.5 x 15.5 cm @300ppi
Â
Now, what i would expect is that:
1. The moment i open the scanned image, click the crop tool and select the 'Half Page' setting, the crop boundaries would show up up at the correct setting in terms of size and resolution.
2. I should then have a window within which i could move the image to get the parts i want into the crop box.
Â
This is not happening:
1. The crop size (box) is showing as 23.5 x 15.5.
2. The info is showing as 26.14 x 17.24
3. The image size is showing the same and @ 300ppi.
View 10 Replies
View Related
Dec 16, 2006
I've just installed the CS3 beta on my Intel Mac. Everything is fine except...
I can't get my Canoscan 9900F to work. When I select File > Import, it should list the ScanGear 8.2 Twain driver but it doesn't.
I've manually placed the plugin in the CS > Plugins folder, and I've used the ScanGear installer to do the same. The plug in is there in the Finder, but doesn't load.
When I look at the system info from within CS3 (Help > System Info...) right at the bottom of the log is the message: Installed TWAIN devices: NONE.
It's hard to believe that TWAIN would be disabled in the beta.
View 2 Replies
View Related
May 7, 2012
I download PSCS6 beta, and since then, there are some files that I cannot open at all.Got a message ( in both, PS CS 5.1 and in CS6 ) that say;
Â
"Could not complete you request because a program error"
View 15 Replies
View Related
May 15, 2012
how to uninstall Photoshop cs6 beta on Mac if the file (including the uninstall file) have been trashed and emptied.
View 2 Replies
View Related
Apr 9, 2012
I still cannot open RAW files shot by Nikon D800 in Photoshop, even with ACR RC 6.7 installed or even Photoshop CS 6 beta. Some seem to have succeeded by installing ACR RC 6.7.
View 8 Replies
View Related
May 9, 2012
I'm having trouble with applying curves. I import a PDF and try to apply curves to it. After I open up curves and change the settings, I see the live preview on the PDF, but when I press OK to save changes, it goes back to the original PDF as if none of the changes were saved.
Â
I also tried applying curves as a new adjustment layer, and that appears to make the changes stick. But if I resave the PDF or print it out, it still comes out looking like it did before the changes I made.
Â
Lastly, I tried adding curves adjustment layers, and then merging all the layers, or flattening the image. In both cases, the PDF went back to what it looked like originally.
View 6 Replies
View Related
May 11, 2012
I removed the PS CS6 manually from my Imac. Now I can,t install PS CS6 from the cloud.
View 3 Replies
View Related
May 26, 2012
Unfortunately I attempted to uninstall my CS6 beta by dragging the app to the trash, then emptying the trash bin. Now the install disk for CS6 still sends an error message and says there is a beta version of CS6 on the disk and won't install the real CS6.Â
View 1 Replies
View Related
May 19, 2012
I installed Photoshop CS6 beta on my Mac, OS 10.6.8. Once I purchased and went to install CS6, the installer informed me to uninstall the beta version of Photoshop, but didn't say how, or that there was a catch. I went and uninstalled Photoshop CS6 beta by dragging it to the trash. OOPS! - now the release version won't install, and I can't find anything on the Adobe website other than private messages from Adobe employees to specific users with the same problem as to how to rectify the issue.
Â
Aside from venting my frustration at a situation I (and others have found ourselves in that could have been prevented by a little better planning and installer design.
View 3 Replies
View Related
Mar 3, 2009
Brand new computer, 32-bit XP, 4GB RAM (sorry, but too many of my important programs don't run on 64-bit), Intel 9650 quad, 3.0 GHz, RAID array, etc. And an ATI 4850 graphics card with 512 MB DDR3 RAM (on the Adobe tested list) and it doesn't work properly with OpenGL turned on: brush lines do not complete until I start another line, or click someplace in the image (which creates another line!); preview for the stamp tool doesn't work (there is no preview); 'ghost' panels over the image stay there even when they're moved (a mouse click is needed to make them disappear). Animated zoom works (nice feature), flick panning does (not really needed), birdseye view does (also nice feature), rotate canvas does (not needed that I can see), pixel grid (might be useful); I haven't tried the others. Bottom line: if I turn OpenGL off, it works fine, but those features are absent. I've been updating my drivers as ATI has (they've done several in the past month or so),
I don't know how the beta testing was done or how this card could be on the approved list, but someone fell short.
View 4 Replies
View Related
Jan 11, 2009
Konfiguration Dell
Win XPpro SP3,
CPU Pentium 3 3 Hz,
3GB RAM,
Graphic card: ATI FireGL V3100 128Mb with driver 8.543.0.0 ( 08october 2008)
Latest directX
The PS CS4 do not recognise the graphic card and GPU settings are grayed out in Preferences> performance.
View 1 Replies
View Related
May 8, 2009
im a photoshop cs4 user,But openGL doesnt work,i have an dell XPS m1730 laptop with 2x 8800M GTX sli,those cards are probably the high-end cards from the 8M series, so i think openGL should work on it...
View 7 Replies
View Related
Oct 7, 2013
Why Can I not enable OpenGl and thus 3d rendering in Photoshop?
Â
Adobe Photoshop Version: 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2693 MHz
[code]....
View 10 Replies
View Related
Feb 6, 2013
I have been trying to use the 3D features of Adobe Photoshop CS6 Extended and have been having no success. I have enabled the 'Use Graphics Processor' in the Edit->Preferences->Performance dialog box. I have also ensured that I have the latest version of the drivers installed. The video cards (in a CrossfireX configuration) are Sapphire HD Radeon 7970s. The thing is, when I installed Photoshop a few weeks ago, I tested the 3D functions and they worked fine. Now they no longer do so. I have updated video drivers and Photoshop since then but when I reverted back to the older drivers, the 3D features still didn't work. I have tested OpenGL in Modo 601 and Houdini FX 12 with no problems.
View 5 Replies
View Related
May 9, 2013
The are some unpleasant bugs on CS6 when OpenGL is turned off. bug in PS-13.1.2(only) on Win7x32.When making selection, for example, with magic wand it`s edges are terribly blinking and shaking.
Â
And very old bug on all versions of CS6 for win.When the rullers are visible, try to shake the canvas with, for example, hand tool to left-rigth. The rulers will be cracked with artefacts.
Â
main bugy-feature is thaе the contrast of path`s lines is very poor on noisy midle gray areas, even when the antialiasing is off.
View 2 Replies
View Related
May 5, 2012
i did notice a lag (almostac ceptable, passable) using the brush tool , painting black and white on the maskes..i tried different video card from nvidia to ati , but did not find a real solution..the only solution is set the opengl off or set to basic,
View 20 Replies
View Related
Feb 25, 2013
How can i enable OpenGL in my Photoshop CS6. I have GTX 650 Video Card. Here is screen. [URL]
View 15 Replies
View Related
