Photoshop :: Mouse Roll Over The Pic

Jul 23, 2005

when I roll over the pic, it didn't change to its original?

View 9 Replies


ADVERTISEMENT

AutoCAD Inventor :: Turn Off Mouse Function When Mouse Cursor Moves Over A Feature?

Apr 12, 2013

how to turn off the mouse function when the mouse cursor moves over a feature, such as an edge, point, or surface, and highlights it. I don't want it highlighting the features automatically. I want it to highlight once I click over a feature. My colleagues and I are very distraught by this feature, and will be discontinuing our use of your products that do not allow us to turn this feature off. I'm not sure why you'd want to weed your customer base like this, assuming that I can't turn this option off from the research I've done pouring through the hundreds of complaints related to this issue. I haven't been able to find any posts recently, or regarding Inventor 2013 specificially on this issue, so I was hoping this version had the option of turning it off. Does any of Autodesk's software, such as AutoCAD, have the option of turning it off?

View 5 Replies View Related

Edge Animate CC :: Mouse Enter Mouse Leave Not Working?

Oct 30, 2013

I followed the tutorial on this page: [URL]. However, my animation auto plays and mousing over has no effect. I have searched and sreached to no understandable (to me) avail. Here's a link to the file: [URL]

View 2 Replies View Related

Photoshop :: Papper Roll

Jan 22, 2006

I want to roll a image to it's horizontal axis like rolling a paper

I dont have any link to express it completly but,
like paper curl in corel (certainly it does not make it complete roll).

but how to make it a complete roll(on horizontal axis not on inclined axis) so that it looks like a rolled paper.

View 9 Replies View Related

Photoshop :: Printing In 44 Inch Roll

Dec 3, 2012

I am using photoshop to stack 2 frames 12x16 in a 44 inch roll

View 8 Replies View Related

Photoshop :: Image Ready Roll-Overs

Sep 28, 2004

I created some roll-overs in individual Photoshop and Image Ready documents... they work fine as individual photoshop files in Image Ready. However, when I try to move/copy them into a new Photoshop/ImageReady document they do not work.

How can I move/copy them into another Photoshop/Image Ready document so that they still work... to then later save as HTML and move as a web page...

View 4 Replies View Related

Photoshop :: Faint Grey Border When Printing On Roll Paper In CS5?

Jan 4, 2013

When I print in Photoshop CS5 on roll paper, there is a faint grey border that prints all around my image.  I haven't created a grey border in my files. 

what setting is creating this or what's going on?  And how i can stop it?

View 8 Replies View Related

Photoshop Elements :: Is Revel Syncing Camera Roll / How To Disable It

Nov 6, 2013

I have elements 12 and a new iphone.  It seems that all of camera pictures from my phone have automatically been included into my elements library without plugging it into itunes.  What process is doing this?  Is revel syncing the camera roll with elements and how can I disable it? 

View 1 Replies View Related

Photoshop Elements :: How To Create A Row Of 3X5 Photos Spaced Evenly On Roll Paper

Oct 25, 2012

I NEED TO CREATE A ROW OF 3X5 PHOTOS SPACED EVENLY ON ROLL PAPER (FINISHED PRODUCT COULD BE AS LARGE AS 13in.X44in.)

View 3 Replies View Related

AutoCad 3D :: Any Way To Roll Geometry

Jul 11, 2011

Is there a way to roll geometry? Much like in a real life scenario where I have a sheet plate part that needs to be run through a roller?

View 9 Replies View Related

Mudbox :: How To Get Zbrush Roll Effect

Mar 29, 2012

How to get the Zbrush 'Roll' effect on Mudboxs brush alphas? Here's a link to what I'm referring to:

[URL].........

View 4 Replies View Related

AutoCAD Inventor :: Roll Up Shades

Apr 29, 2013

i design shades and need to know is there a way to show material rolling up and un-roll from a roll in Inventor.

View 2 Replies View Related

AutoCad :: Printing On Roll Of Paper

Sep 6, 2011

We need to print a drawing on an A2 paper roll but the drawing is cut off at the length of an A1 or A2 page. How do you set it up so the full length of the roll can be used?

At the moment the roll cuts off at 841mm in length when set to A1. How do you configure it to use more length of the roll so it doesn't cut off the drawing?

View 7 Replies View Related

VideoStudio :: Camera Roll Folder Crashes X5?

Sep 1, 2013

Just accessing the "camera roll" folder crashes VS X5. I have to copy every video I want to edit from that folder to somewhere else in order to edit them. FLAT OUT LOCKS UP AND CRASHES if I access the Camera Roll folder in VS X5 in Windows 8.1.

Crossfade is extremely buggy, it leaves pops and sometimes even cuts out the sound completely if one is using a crossfade on a video that has the sound already on it. I usually end up having to record the output of the audio from VS X5 through "stereo mix" with Audacity, save it as a wav, and then mix it into the video again later while muting the original video.

Crossfades are extremely glitchy in general when using AVCHD, the only high quality format that doesn't degrade the sound to oblivion.

Saving as an HD MP4 results in such bad sound degradation that it's almost not usable if it contains music, everything above 12k is pretty much completely hosed.

Thumbnails will randomly unlink themselves, and when you try to re-link them, even though they're there, it doesn't know how to get the name, so you either have to type it in again or select it from the list.

Are these things fixed in X6?

View 3 Replies View Related

CorelDRAW X5 :: Roll Plotting On Roland Camm-1 Pro

Jul 29, 2012

i designing in CorelDRAW x5... Plotter is roland camm-1 pro... everything is ok but i want roll plotting.. i want to plott 58cm x 300cm but then have 1 issue: Output doesn´t fit on media... and if i do print... they start printing but in 160cm they stop... plotter area is 58cm x 25 m...

View 10 Replies View Related

AutoCAD 2010 :: How To Plot Different Scales With Different CTB Onto One Roll

Dec 12, 2013

I have several drawings and which have different scales (1:50, 1:20 and 1:10) all in one dwg file. I made different .ctb files for each of them to make easier to interchange drawings between two different scales. But now I'm plotting each of them onto seperated rolls. I wonder if there is a way to plot all of them onto just one roll?

View 9 Replies View Related

AutoCAD Inventor :: Making A Roll Of Tape?

Mar 28, 2012

I have to make a roll of tape in Inventor, but I'm not too familiar with/used to the program. It's the small invisible adhesive tape, like the kind you'd find in office. So far, I sketched and extruded the plastic part the tape gets wrapped around, which is basically just a small tube. I also have a rectangle that's really long for the actual tape part, and that's extruded but very thin. they're both made as standard.ipt files. I opened a standard.iam file to put them together using constraints, but I'm not exactly sure how. I have the edge of the rectangle on the outside of the circle, so I just have to wrap it around. I'm assuming I just bend the rectangle (tape) around the circle (plastic part), but I don't know how to do that.

View 1 Replies View Related

AutoCAD LT :: In Stock Ribbon Some Of Panels Fly Out When Roll Over Them

Apr 4, 2012

In the stock ribbon, some of the panels fly out when you roll over them, some you have to click to get them to fly out.  How do you set this?  I have created some custom panels but they all require a click to fly out.

View 7 Replies View Related

AutoCAD Inventor :: Contour Roll With Flange?

Jan 6, 2012

I'm having no problems creating the contour roll, but it won't let me add flanges to the outside edges.  I have attached a file that shows the measurements that I want.  I need to be able to create a flat pattern.  The material thickness is .1046" and 3" deep.

View 1 Replies View Related

AutoCAD Inventor :: Cooling Roll And Sheet

Oct 24, 2011

I have two cooling rools( just two cylindrical drums) a sheet is been passed on this. Wonder how do i draw the flexible sheet, actually i have many cylindrical rolls placed at different locations - all i want is a thin sheet to be passed onto each of those drums. Just like belt and pulley, but here sheet and a drum. Its very difficult to calculate dimensions and constrain, instead am wondering how do i create a flexible sheet of fixed length and constrain it so that they rest on top of the drums.

View 1 Replies View Related

AutoCAD Inventor :: Follow Radius Of Roll

Jul 12, 2012

I'm still new using autodesk inventor and still learning. I have trouble to cut the plate (Penahan Depan.ipt) follow the radius of the roll (Roll.ipt).

View 4 Replies View Related

AutoCAD Architecture :: Properties Palette Not Available When Roll Over It

Jun 29, 2011

AutoCAD Architecture 2009 - Something new started today!!! Working in either design or construction workspace the Properties tool bar will not operate.  When I select an object and roll over to the Properties Pallette it simply starts to blink and does not open.  Also, the Quick Properties panel will not open.  Background, the new file I am working on was last saved on my laptop and transfered via a thumb drive.  I have done this often with out a problem.  However, the laptop is a new one with Windows 7 and my desktop has Windows XP. 

View 1 Replies View Related

Revit :: Transaction Counter With Roll-down Shutter

Jan 27, 2012

When I am placing a roll-down shutter family in the same wall and same place as a transaction window family that is the same size gives me an error stating the family is not cutting anything and has to be deleted.  How do other people do this?

View 1 Replies View Related

AutoCad :: Get 2010 To Print To Roll Of Paper?

Apr 24, 2012

Trying to get my Autocad 2010 to print to a roll of paper? I have a new printer and I have a 24 inch by 50 foot roll of paper and when I print it only lets me print 24 inches by 36 inches and it wont let me use the roll? I have a HP Designjet 130R

View 9 Replies View Related

AutoCAD Inventor :: Contour Roll To Flat Pattern

Dec 19, 2011

A rather simple sheetmetal part won't result in a flat pattern. Pls. see attached screendumps.

The problem starts with the contour roll. Surpressing this contour roll feature (and dependent featured flange) results in a OK flat pattern.

IV Pro 2012, Win 7-64 Ult.

View 1 Replies View Related

AutoCAD Inventor :: Adding Flanges To Contour Roll

Jul 25, 2012

I've been having some issues recently with Sheet Metal parts. I am attempting to make a part that looks like this:

The only way I have been able to do this so far is by doing a contour roll to get the rounded part and then add the flanges on as part of an assembly. 

I have attempted to do it as one Sheet Metal piece but I continually run into the problem where I cannot refold the part once I have the flanges.

Here are the steps I have gone through:

1. Created a contour roll to the necessary angle to get my desired dimensions
2. Unfolded the roll
3. Created my hole pattern
4. Folded back the flanges

This is where I got stuck. I attempted to refold the part between the bends but it will not let me do this. If I have one flange, I am able to refold but not when I have 2.

Another problem I have encountered is when I get one flange done, the thickness of it is larger than the rest of the part. 

Autodesk Inventor Professional 2011
Windows 7 for Mac
80GB HDD Partition
Intel Core 2 Duo @ 2.66 GHz
2.75 GB Usable RAM

View 8 Replies View Related

AutoCAD Civil 3D :: Change The Order Of Roll Over Commands

Dec 6, 2013

I would like to change the order of the point grip/roll over from

move lable

rotate lable

reset lable rotation

reset lable

to

rotate lable

move lable

reset lable rotation

reset lable 

I can not find this in the CUI.

View 3 Replies View Related

AutoCAD Inventor :: Contour Roll Between 2 Isocele Sides

Mar 28, 2012

Inventor is awesome, quick to learn but sometime i get really blocked..Makes 2 hours i am trying everything to recreate a sheet of paper (a4) bended like a cone that isn t perfectly round but with the bottom flat.

I have attached a photo of what i am trying to create.I have tried to make it with using a triangle isosceles as the bottom and curve a sheet of metal using the "contour roll" between the 2 isocele sides.

View 2 Replies View Related

3ds Max :: How To Undo / Redo Toolbar Roll Back (2013)

Apr 12, 2012

I've installed 3ds Max Design 2013.

I don't like small undo/redo window in quick access toolbar. So I always use 'max2009' style toolbar in UI customization.

but in 2013version, there are all dropdown icons are broken

So I changed to Default UI and changed again just color to 2009 style color.

but I cannot roll back this undo/redo step window to 2009 style.

I tried add 'undo scene operation' but it doesn't shows step windows.

View 2 Replies View Related

AutoCAD Print / Plot :: Plotting To Roll Paper

Feb 18, 2013

We have a T790 44in, with 42" roll paper installed.

The thing I'm having trouble with, is getting it to act like it has roll paper. I can set custom paper sizes in the printer drives all day (such as 42" x 42") but this is only half way accurate, and can waste a lot of paper.

Is there a particular way to set the printer to use the roll paper?

View 7 Replies View Related

AutoCAD .NET :: Roll Back Variable Within Undo Command Outside Of Transaction?

Mar 10, 2012

I need to be able to roll back my variables if user apply an UNDO. Let's say.

Myinteger =1
Startstransaction
........
trans commint
Myinteger=2 

Startstransaction
.......
trans commint
Myinteger=3

 if user does undo 2 times  the Variable  Myinteger  keep the value  3 . I want it back to 1. How?

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved