is there a way to minimize the size of a picture but still have great quality for a picture that is posted on the web, and good quality even when I make the picture smaller on my web site.
View 2 RepliesI'm using Photoshop CS4 on Windows 7 at work and every time I minimize or close Photoshop and then maximize/re-open, my Swatches and Layers panels are minimized.My workspace is saved, and I've tried resaving it (including panel locations, shortcuts and menus).
If i'm just simply switching programs/windows, it doesn't happen. Its only when the entire program is closed or minimized.It doesn't make any difference if I have a file open or not. Screenshots: left is before minimizing, right is after minimizing and maximizing again.hasn't always happened. Its jsut been in the last few months, and its driving me nuts. I mean its not like its hard to open them again, but when i'm switching back and forth between other programs and trying to do things quickly, it gets extremely irritating.
It doesn't happen on my colleague's computer, and she has the same version of everything. I've never seen it happen before (before it started doing this).I have CS5 (and have had CS3 and CS4 in the past) on my Mac at home and its never happened. Although you can't actaully minimize Photoshop on Mac anyway.
I've got PSCS6. I work with multiple images at once and sometimes I have to minimize them to make room as I use PS maximized over my desktop and I use litestep as my computers shell so I don't have the taskbar in the way. Anyways, I find that PSCS6 likes to minimize my images to the hidden taskbar, which I find annoying as all hell. Why isn't it minimizing the photos within PS like it did in CS5? And is there anyway to make it do that again in CS6?
View 14 Replies View RelatedI am constantly opening documents and moving them around on my screens. I never remember this problem in CS4, but in CS5 when I try to move a document by clicking in the top gray bar and dragging, the document often minimizes and goes hides in the Mac bar at the bottom.
View 5 Replies View RelatedIn the 3 images I have included you will see the original jpeg I sent to someone, my "vectored" image and the final "proof" that was returned to me. I am familiar with the "plastic" effect to get the 3-D looking raised areas, but I can not for the life of me even get my live trace to make a vector in similar colors here.
It has become quite a pain as I am looking to be able to do these designs on my own. btween the jpeg and the final "proof" jpeg how to make the vector to send off for production
I just upgraded from PSE 7 and I absolutely cannot stand that they made the parts circled in my image un-moveable (as far as I can tell). Any fix for minimizing these? In my opinion the "Open/Quick/Guided/Expert" panel is an utter waste of space.
[URL]
Today somehow the setting on my camera had raw file saving turned off. To try to minimize loss from post processing of the jpegs I assume I should save the edited files as PSD and develop my final pictures from that?
View 1 Replies View RelatedI am working with and extension to AutoCAD Map 3D 2012 on Windows 32. When a dialog opens it sometimes immediately minimizes and must be restored via the Windows task bar. I have also noticed that the dynamic input command line is visible when the dialog disappears and is present even if the dialog does not disappear. I have shown this in the image below. This also occurs on Windows 7 64 bit, as well.
If I set the workstation to windows Basic Theme or turn off dynamic input, this does not occur.
just got upgraded to v2.8 and whenever i change desktops the toolbox and layers windows [or is that dialogues?] minimise, the main window doesn't though.
i've tried 'saving current window positions' but it still minimises the windows.
using debian wheezy and xfce 4.8
I am using LR 3.5 on the MAX OSX Lion. This problem has been going on for some time, so I am pretty sure it predates 3.5 and lion. If I minimize LR to the dock to do something else, then go back to the dock to expand, sometimes it doesnt expand... The only way to get it back is to click on the icon so that menu bar at the top of the screen is Lightroom's, then quit Lightroom from the menu and relaunch...
View 1 Replies View RelatedI am creating a large form. The goal of the form means I am unable to break it down into smaller forms as there is a great deal of interaction between all levels of the form.
One of my first fields is a multi-value field (Foundation Type) with four options (None, Slab, Piers, Wall). Three of those options have a group of fields lower in the form with between 1 and 5 fields.
(Multi:Value Option: Example of fields specific to that option)
Slab: Thickness, Edge Depth, Edge Width
Piers: Diameter, Depth.Offset
Wall: Footing (T/F), Depth, Width,
I currently disable all of the groups of fields that are not part of the active option in the primary multi-value field throught the (Enabling Paramter Name) option with a rule. This keeps the user from entering values that affect a Foundation Type that is not currently active, but the disabled fields take up a lot of room on my form and may confuse end user less familiar with the system,
The group function in the form has a minimize toggle next to the group name, but the Form Editor does not show any options to manipulate this toggle. Is there a way to automatically toggle this minimize/maximize function through a rule or other means)? Or are there any other means of hiding form fields that are not currently enabled?
I just got X3 today after using PSP since 2000 or so. but for the life of me I can't find the minimize button anywhere. All I get are tabs, but no minimize options so I can switch between them like I'm used to doing. Also is there a fix to go to the X2 type organizer, instead of having them all show at the bottom?
View 1 Replies View RelatedIs it possible to eliminate the Profile listed in the title are? I prefer to view the path in the title area. Sometimes the path can be fairly long and characters get cut off. If I could eliminate the current profile from being listed here, I could view more of the path. See attached.
View 2 Replies View Relatedwhere I can find script/plugin/software for making images composed of images. I'm desperately needing this for an non-profit assigment. Any help would be very much appreciated!
I'm looking for a script, software or photoshop plugin or anything that could help me with this.
What I want to do is this: Out of ~ 1000 pictures I want the software to arrange them into visualizing an image which I have choosen.
I am in the process of completing my Photographic website and need to make thumbnail and larger sizes for the the site. The site will have approximately 100 images on it. Clicking the thumbnails will connect to the larger images. How do I make both sizes in PS CS? Perhaps their is a generator that you would recommend for Mac 10.2?
View 3 Replies View RelatedI am attempting to combine several images into a collage of reduced-sized images that can be expanded when clicked on
View 1 Replies View RelatedA long time ago, when I was using Photoshop Elelments I found a plug-in that made it possible to work with stacks as a unit.
If I labeled the top image in the stack that lable was applied to all the images in the stack; then I could sort the the image on top and all the images in the stack would stay together, or if I deleted an image in the stack all the images in the stack were deleted. Without it I have open each stack I lable and apply the lable, so when I sort the stacked images they stay together.
I need to convert color images of vehicles to monotone images. When done correctly they will look like the car has been primed in preparation for painting.
Conversion to gray scale does not do the trick.
I'm making a collage containing 4 images with different resolution. I want each image to have faded edges (to white) and I'm using gradient tool to accomplish this. The problem is that since the images have different resolution the gradient tool gives different result on each image even though I make the same "swipe". Is there another way of accomplishing these faded edges, equally looking and of the same size? The faded edges (to white) will, as you might have understood already, constitute the limit between the four pictures, that is, a white cross.
View 1 Replies View RelatedHi, I am starting a new business making art prints for artists. I have purchased this huge printer ... just got it. I've been studying photoshop for months using "classroom in a book" and am finding out that I've probably studied the wrong thing.
I have three questions and thanks in advance for any of your expertise.
1. I successfully printed out a two foot by two foot photo I took of my husband with my 8.2 megapixel camera. Then, tried to print out another photo.... used the same photoshop settings, but the print was 6 inches by 6 inches...... I did notice that the second print was only 16. %... I wondered if that caused the difference in size? How do I set that to 100 % if that is what is needed?
2. I want to print out multiple small prints using this big paper and printer... I want to tile these various prints (all different) along the top making rows... I want them to be all different. I called Epson support and they said I could do that in photoshop. Do I use the browser?
3. I have a wide format scanner. It does up to 11 x 17 inches. If I have something larger to scan, let's say, I scan the bottom of the image and then scan the top of the image, how do I put them together?
Just installed Lightroom 4, more than 60000 images were imported. Many of them were duplicates, triplets and so on. I want to have a clean, unincombured library. Should I delete the 60000 images and reinstall the images from my photo digital cards or use the slow process of "X" out the unwanted images? I would like to start improving my images vs removing the unwanted images.
View 2 Replies View RelatedI've been having problems selecting images in the library module when multiple images are in view (not down in the timeline, but in the main window). It seems sporadic with which ones it won't let me select, it somehow manages to be the ones that I need to click....!! I just literally can't click it as if it were an image I already imported or something, but it's not grayed out like that. I've been having to select a nearby image then use my arrow keys to navigate to and click the image I need.
View 2 Replies View RelatedBut I wouldn't be able to upload a hundred tiny, plain images. I made this to add onto the background removal FAQ. I hope it's accepted.
[URL].......
(Image is clickable.)
Lightroom will not display preview images during import of raw images. Any images in other formats display fine but with raw images I get a gray window the size of the preview image and the words "preview unavailable for this file".
Running Windows XP 64, Lightroom 3.3.
In Lightroom 4.1 when rating (flags, stars or colors) a selected group of images all images selected will have the same flag applied. For instance if I select 10 images to view in the survey mode to compare and select 1 to be flagged as rejected all 10 will be flagged rejected, not just the one. Is there a way to turn this off to select a group of images and flag each differently?
View 2 Replies View Relatedlet's say I have a page with 6 images and 6 captions. is there anyway to crop out more than one at a time and save them? Currently I have to crop out all but one, then save that one, then reload the image and crop out another one and save etc over and over. is there a better way?
View 4 Replies View RelatedI am working on pdf file, in which all the assets has been created in illustrator. I am opening that file in illustrator, and by save for web option exporting the images. But somehow the images as not proper. There are some colour related issues and also the images are not proper.
Is there any other way around so that I can extract those without loosing the quality ?
I’ve been looking for over 2 hours now how to do this and I’m still no better off, however I have learnt a few tips here and there,so I’m totally new to gfx stuff but i know how to make an image transparent.
i want the logo on the image but i dont understand how too?? ( with out getting all the grey and white boxes (around the logo on the greenhouse pic which goes white once i save it) i want the image background to still be there.
Importing images from specific folders is including images from outside selected folders.
View 3 Replies View RelatedHow do I put images that have been altered in PS together with my images altered in LR4 to make a slideshow. They are currently sitting in LR in 2files and I simply don't know how to combine them
View 12 Replies View RelatedI was learning about the layers and masks and i seen that i have to have two images under each others under the layer option panel, i tried many times to add images but it always shows in two different panels as the following image I want to add two different images in this panel to make any changes i want.
View 3 Replies View Related