PS 6 focus stacking. Closeups of green moss turn into red on top and bluegreen (or the reverse) on bottom in finished photo. What is happening and what is the fix?
View 10 RepliesI tried to find a CS6 forum in which I could post but could not find a forum that I was alowed to post inI have taken several photos with multiple focal points and I am trying to merge them in Photoshop CS6 but in every attempt I end up with a single layer that is used while the others indicate no selections at all.
Even when using just 2 images the process only uses the first image and it sets the mask to transparent.Here are the steps I've been following Open each of the images I want to stack.Use the Photomerge tool with Auto, Blend Images Together, and Add Open Files. This successfully creates a new image with multiple layers but areas are being selected.Use Auto Blend Layers, Stack Image with Seamless Tones and Colors checked.The obvious result is no change because only the first layer is being used.
Is it possible to do (Focus Stacking ) in Elements11?
If so, any link to a tutorial?
how do you do focus stacking like Heilcon
View 1 Replies View RelatedMy cursor/cross-hair suddently changed from Green to Orange. I don't know what it does to my drawing. I did not play with the settings... How do I get it back to green?
Capture.PNG
In addition, I also noticed that I do not get a textbox next to my cursor while typing commands. I love to have this back. How do I get it back? This affects me a lot as I can no longer see my scale factor and alike...
I've attached a leaf image. We'd like to "Autumnize" the leaf even more and remove the green from the leaf. I've tried playing with the various options in the Color drop down (Color Balance, Hue Saturation, Colorize, Brightness-Contrast, Threshold, Levels, Curves), but I can't seem to do it.
View 2 Replies View RelatedHow to unite the red and green parts of the leaf into one solid green leaf? See attached “Leaf” file. (How do I attach the AI file?)
I tried the Pathfinder UNITE command and the Live Paint MERGE command.
I have 10 exposures (photos) of stars and i want to stack them into one photo, but not start rails. I want sharp stars. With more exposures we get more details on the picture and less noise. I open all pictures as layers and use "edit"> "auto align layers", but got this message "Layers do not overlap enough to detect alignment. In general, images intended for alignment should overlap by approximately 40%."
So, i tried second option, "edit" >"auto blend layers", but got worse result. I don't even know if i use right tool. I hope you understand what i want to say. Here is the example (he stacked 6 30sec exposures into one in Photoshop, but how? :/): go to Flickr and add this at URL (i cant post URLs yet): "photos/corsonandroski/4887232674/"
I've been using photoshop cs (now cs2) for a year - especially for photography, and there is something that I just don't understand which should be as simple as scratching your ....back. I often apply multiple filters on different layers like this: copy background layer (call it base layer) and every time I'm applying a new filter I'm doing so by stacking a "frech" copy of the base layer and painting on Layer Masks if needed - no problems so far.
My question is: When I'm stacking with a fresh base layer ready to get some - lets say noise - the underlaying layer (could be for example a blur filter) dissapears - I know I can copy the layermask and drag it up if I have for example reshapend the eyes, but the blur of course dissapears. As for now i just flatten the image and start again but I know this is not the right way to do it.
Is it possible to aplly multiple filters on top of each other and then use merge visible and then at last apllying the merge visible layer a layer mask and paint back the sharpnees of eyes, lips ect. SHORT: HOW DO I STACK LAYERS WITH MULTIPLE FILTERS AND AT THE SAME TIME MAINTAIN THE EFFECTS ON MY WORKING DOCUMENT (PICTURE). Thanks for any advice given .
I just bought the Photoshop CS6 and I tried to do stacking photos to create star trails but it won't.
View 1 Replies View Relatedapplyng a layer and flattening. Now i really want to get over this hurdle so that i can save important images unflattened for further re-adjustment later.
I have browsed the web for two days and found nothing that helps me. The crux of the issue is that i get to a point where i have applied maybe three adjustment layers and then aaply say a sharpening layer only to find i cannot see its effect on the image due to its order in the stack.
Is there a facility to photo stack with cs4?
View 1 Replies View Relatedhow to play my own actions and stack them on top of each other without getting the individual layers in each file jumbled up. Each action is several layers that I select, the press CMD G to put into a folder and rename it. When I play another action on top-the layers are no longer in their rightful folders but moved around-some in one folder, some in another, some by themselves without a folder. How can I keep my actions in their own folders and play them on top of each other while keeping them in their own individual folders?
View 4 Replies View RelatedDoes Element 12 include photo stacking?
View 1 Replies View RelatedHow to combine version sets? When I imported my photos they came across individually and it will take me hours to stack them one by one.
View 4 Replies View Relatedwhich piece of Photoshop software is most suitable for stacking closeup images of the same subject over large depth of field so that I can achieve a crisp image of the subject by Blending??
Also, can I upgrade to this software from Photoshop elements 7?
I messed up by stacking photos before moving to an album. I need to permanently unstack photos. The 'stack' option in 'edit' is grey so I cannot select it.
View 2 Replies View RelatedI have Lightroom 4 and Photoshop CS6 running on a Mac. I have the box checked to stack edited with originals.
I recently moved all of my photos to a an external Raid 1 drive - I did this within Lightroom, so that Lightroom knew where everything was. Everything seemed to be fine.
Today, I realized that after going to Photoshop and coming back into Lightroom, my photos are not stacking. Not only are they not stacking, but according to Lightroom they are not in the same folder, even though they are.
I am not working from a collection, I am working from the actual folder structure on the drive. If I go to photoshop, edit, save and come back, when it returns to Lightroom, where normally the new edited Tiff would pop up - now it returns a black screen, saying "no photo selected". If I go to the library module, the screen is still black. If I go the top of Lightroom and click on "All Photographs" the tiff file is there next to the picture. However, it is not stacked. If I try to stack it, it says that it can't stack photos that are stored in different folders.
I don't know where Lightroom is putting this Tiff file. The folder that I was editing from had 20 photos in it. I went into photoshop, came back with a tiff, and there are still only 20 photos in the folder, yet if I go up to all photos, it is there, so Lightroom put it somewhere.
When I go look at my external hard drive, the tiff file is there. It is right next the raw. In the same folder. So, it seems that Photoshop is putting it back in the right folder, but Lightroom is not.
I have lots of software code (in tSQL, html, JavaScript, XAML, and C#) that I need to print in a long scroll. The scroll will be no more than 440mm wide and as long as it needs to be (though the roll of paper is 45 m long so I’ll need to make sure it is shorter than that).
The resulting code listing is to from part of an exhibit contrasting the ‘sketching’ phase in a multidisciplinary project between design, social science, and software engineering. The exhibit will form part of the Research Through Design conference [URL]...
At first I thought I’d print straight from the development environment (Visual Studio 2012 and SQL Server Management Studio) but I realise now that is not possible because
1) Both tools assume standard page sizes, and
2) I need to rotate the software code listing 180 degrees so that the end of the listing is at the tail of the paper roll.
For these reasons I’m doing it in Adobe Photoshop (CS5, 64 bit, on Windows 8).My workflow for this is verging on the ridiculous.
1) If I cut-and-paste the code listings file by file from Visual Studio 2012 and SQL Server Management Studio into Photoshop (or Illustrator) I lose the formatting, for example the coloring of comments differently form variable declarations. (See [URL]...)
Thus Step 1 is to cut-and-paste each file into a Microsoft Word document.
2) If I cut-and-paste from the Microsoft Word document into Photoshop I still loose the formatting, and Microsoft Word does not seem to be able to cope with the paper roll nor rotating the print. So I save the Microsoft Word document as a PDF and open that into Photoshop.
3) I now have 51 Photoshop files each with one layer containing the text for that ‘page’, though I think it’s an image as it is not editable as text. I then save each of these files.
4) Using Adobe Bridge I open all 51 Photoshop files created in Stage 3 and “Load Files into Photoshop Layers” so that I have a new single Photoshop file with all 51 text image layers in.
5) The layers sit on top of each other. What I need is for them to sit head-to-toe. I don’t know how to do this without spending a million years selecting layers and moving them by hand.
6) If I ever get Stage 5 done I will then group the 51 layers and rotate the result through 180 degrees.
7) I will then resize the result to have a width of 400mm and print the resulting file on our banner printer, having first calculated the resulting paper ‘height’ and turned off the automatic paper cutting.
So my questions are:
1) Is there a better way of doing this?
2) I can see the Photoshop actions that will align layers by their tops, their bottoms, or their centers but how do I automatically align them so that the bottom of layer 1 touches the top of layer 2, the bottom of layer 2 touches the top of layer 3, etc.?
Work_Area.JPG
In X5 I was able to easily stack two window dockers on top of each other by double left clicking each title bar of the floating dockers. All subsequent dockers would automatically stack on top of the top most docker. How do I do this in X6? Refer to the attached file to see what I mean. My docking window are stacked to the right of the workspace.
I initially told AutoCAD to stack all of the fractions but I think I have since changed my mind. Where is that setting that I can turn it off in my template file so all new files will not stack fractions? I assume that setting will disable it for text and dimensions?
View 2 Replies View RelatedIs there any way to stack preset filters on photos?
I remember back in Lightroom 3, you could select some filters, like Cold Tone, then select another filter and would apply itself on top of the Cold Tone filter.
Now, it seems in Lightroom 4, every time you select a filter, it completely overwrites all the settings of previous ones.
I am wanting to focus stack a number of images on top of one another while using macro shots. I could not find if this is feature available in any Xara product. The is key to creating multiple focal planes when in macro mode. This has been a feature in Photoshop. [URL]
View 1 Replies View RelatedWhile annotation in Revit Architecture how to enable autostack dimensions for fractional dimensions such as 1/2".
Find the attached file as done in Autocad ..my question is how does one achieve the same in Revit Arch???
Possible to reverse the stacking order of several objects?
View 8 Replies View RelatedI cannot see or Unstack any of the stacks in my catalogs. There is no Stack/Unstack command in either the menu or right click option. Where are the commands for Stacking/Unstacking? I can make a Virtual copy... and it tells me there are 2 others... but I can't see them or Unstack them.
View 1 Replies View RelatedWhat happened to the stacking optons n the export dialog when adding the exports back into the catalog? After watching Jared Platt's creativelive course, I started creating my PSD's by exporting them in bulk, adding them back into the catalog and stacking them on top of the original raw files. After updating to LR 4.2 I don't see the option in the export dialog any more.
View 11 Replies View RelatedThis happenes often, but not consistently.I'm using CS6 (regular) with OSX Lion, 16GB RAM.
Once I have a few files open, Photoshop starts "stealing" the cursor focus, which is to say if I go to any other application, as soon as I make one click, PS jumps into the foreground and becomes the active application. The click I made in the other app was applied, and I can see it when I go back to that app, but as soon as I click again, Photoshop pops back into focus.
The only workaround I've found is minmizing PS while I use other apps. Or closing it and restarting it. Sometimes just reducing the program window works, and sometimes not.
I have taken some netball sport photographs where the camera's automatic focus failed to lock onto the player. Rather, it locked onto the background spectators on the edge of the court. Consequently, the player is blurred. I have tried "lens blur" filter and "distortion lens correction" and even "spherise" without success.
View 27 Replies View RelatedOne of the pictures I took of a friend isn't focused well, can someone please focus it for me here?
I tried myself but the photoshop unsharp mask didn't work so well
Is it even possible to focus this using computer programs?
Any way these photos can be saved? Or any advice as to what went wrong. I operate CS3 Extended and Photoshop Elements 5.
View 6 Replies View Related