Photoshop Elements :: 11 - Possible To Do Focus Stacking?

Dec 31, 2013

Is it possible to do (Focus Stacking ) in Elements11?
 
If so, any link to a tutorial?

View 1 Replies


ADVERTISEMENT

Photoshop Elements :: How To Focus Stacking Like Helicon

Jul 30, 2013

how do you do focus stacking like Heilcon

View 1 Replies View Related

Photoshop :: Focus Stacking Does Not Work?

Jun 24, 2012

I tried to find a CS6 forum in which I could post but could not find a forum that I was alowed to post inI have taken several photos with multiple focal points and I am trying to merge them in Photoshop CS6 but in every attempt I end up with a single layer that is used while the others indicate no selections at all.

Even when using just 2 images the process only uses the first image and it sets the mask to transparent.Here are the steps I've been following Open each of the images I want to stack.Use the Photomerge tool with Auto, Blend Images Together, and Add Open Files. This successfully creates a new image with multiple layers but areas are being selected.Use Auto Blend Layers, Stack Image with Seamless Tones and Colors checked.The obvious result is no change because only the first layer is being used.

View 26 Replies View Related

Photoshop :: Focus Stacking - Closeups Of Green Moss Changed

Jan 4, 2013

PS 6 focus stacking. Closeups of green moss turn into red on top and bluegreen (or the reverse) on bottom in finished photo. What is happening and what is the fix?

View 10 Replies View Related

Photoshop Elements :: Photo Stacking With CS4

Nov 29, 2013

Is there a facility to photo stack with cs4?

View 1 Replies View Related

Photoshop Elements :: Does 12 Include Photo Stacking

Jan 14, 2014

Does Element 12 include photo stacking?

View 1 Replies View Related

Photoshop Elements :: Stacking Version Sets?

Feb 15, 2013

How to combine version sets?  When I imported my photos they came across individually and it will take me hours to stack them one by one.

View 4 Replies View Related

Photoshop Elements :: Stacking Of Macro Images?

Jan 15, 2014

which piece of Photoshop software is most suitable for stacking closeup images of the same subject over large depth of field so that I can achieve a crisp image of the subject by Blending??
 
Also,  can I upgrade to this software from Photoshop elements 7?

View 1 Replies View Related

Photoshop Elements :: Stacking Photos Before Moving To Album

May 21, 2013

I messed up by stacking photos before moving to an album. I need to permanently unstack photos. The 'stack' option in 'edit' is grey so I cannot select it.

View 2 Replies View Related

Photoshop Elements :: Out Of Focus Thumbnails

Apr 17, 2013

When I click any of my thumbnails in organizer Photoshop elements 11 they are out of focus. I am using a Macbook Pro.

View 4 Replies View Related

Photoshop Elements :: Out Of Focus Old Photos?

Sep 9, 2013

How can I get an old photo better focused, it is very blurred?

View 2 Replies View Related

Photoshop Elements :: Snap Full Screen Photo Into Focus

Jan 11, 2013

Elements 11 takes forever to snap full screen photo into focus.

View 1 Replies View Related

Photoshop Elements :: Depth Field - Whole Image Unblurs Even When Choose Small Area To Focus

Jan 17, 2013

When I use the gradient tool in simple depth field in photoshop element 10  my whole image unblurs even when I chose a smal area to focus. It used to work well before but for one reason or another, it stopped. I uninstalled my program and that didn't fix the problem.

View 5 Replies View Related

Photoshop :: Stacking 10 Images To 1

May 2, 2013

I have 10 exposures (photos) of stars and i want to stack them into one photo, but not start rails. I want sharp stars. With more exposures we get more details on the picture and less noise. I open all pictures as layers and use "edit"> "auto align layers", but got this message "Layers do not overlap enough to detect alignment. In general, images intended for alignment should overlap by approximately 40%."

So, i tried second option, "edit" >"auto blend layers", but got worse result. I don't even know if i use right tool. I hope you understand what i want to say. Here is the example (he stacked 6 30sec exposures into one in Photoshop, but how? :/): go to Flickr and add this at URL (i cant post URLs yet): "photos/corsonandroski/4887232674/"

View 1 Replies View Related

Photoshop :: Stacking Layers

May 11, 2006

I've been using photoshop cs (now cs2) for a year - especially for photography, and there is something that I just don't understand which should be as simple as scratching your ....back. I often apply multiple filters on different layers like this: copy background layer (call it base layer) and every time I'm applying a new filter I'm doing so by stacking a "frech" copy of the base layer and painting on Layer Masks if needed - no problems so far.

My question is: When I'm stacking with a fresh base layer ready to get some - lets say noise - the underlaying layer (could be for example a blur filter) dissapears - I know I can copy the layermask and drag it up if I have for example reshapend the eyes, but the blur of course dissapears. As for now i just flatten the image and start again but I know this is not the right way to do it.

Is it possible to aplly multiple filters on top of each other and then use merge visible and then at last apllying the merge visible layer a layer mask and paint back the sharpnees of eyes, lips ect. SHORT: HOW DO I STACK LAYERS WITH MULTIPLE FILTERS AND AT THE SAME TIME MAINTAIN THE EFFECTS ON MY WORKING DOCUMENT (PICTURE). Thanks for any advice given .

View 9 Replies View Related

Photoshop :: How To Create / Stacking Photos In CS6

Aug 23, 2012

I just bought the Photoshop CS6 and I tried to do stacking photos to create star trails but it won't.

View 1 Replies View Related

Photoshop :: Layers Stacking Order

May 26, 2008

applyng a layer and flattening. Now i really want to get over this hurdle so that i can save important images unflattened for further re-adjustment later.

I have browsed the web for two days and found nothing that helps me. The crux of the issue is that i get to a point where i have applied maybe three adjustment layers and then aaply say a sharpening layer only to find i cannot see its effect on the image due to its order in the stack.

View 2 Replies View Related

Photoshop :: Stacking Actions That Have Been Organized Into Folders

Mar 26, 2013

how to play my own actions and stack them on top of each other without getting the individual layers in each file jumbled up. Each action is several layers that I select, the press CMD G to put into a folder and rename it. When I play another action on top-the layers are no longer in their rightful folders but moved around-some in one folder, some in another, some by themselves without a folder. How can I keep my actions in their own folders and play them on top of each other while keeping them in their own individual folders?

View 4 Replies View Related

Lightroom :: Photos No Longer Stacking After Photoshop Edit

Jul 11, 2012

I have Lightroom 4 and Photoshop CS6 running on a Mac. I have the box checked to stack edited with originals.
 
I recently moved all of my photos to a an external Raid 1 drive - I did this within Lightroom, so that Lightroom knew where everything was. Everything seemed to be fine.
 
Today, I realized that after going to Photoshop and coming back into Lightroom, my photos are not stacking. Not only are they not stacking, but according to Lightroom they are not in the same folder, even though they are.
 
I am not working from a collection, I am working from the actual folder structure on the drive. If I go to photoshop, edit, save and come back, when it returns to Lightroom, where normally the new edited Tiff would pop up - now it returns a black screen, saying "no photo selected". If I go to the library module, the screen is still black. If I go the top of Lightroom and click on "All Photographs" the tiff file is there next to the picture. However, it is not stacked. If I try to stack it, it says that it can't stack photos that are stored in different folders.
 
I don't know where Lightroom is putting this Tiff file. The folder that I was editing from had 20 photos in it. I went into photoshop, came back with a tiff, and there are still only 20 photos in the folder, yet if I go up to all photos, it is there, so Lightroom put it somewhere.
 
When I go look at my external hard drive, the tiff file is there. It is right next the raw. In the same folder. So, it seems that Photoshop is putting it back in the right folder, but Lightroom is not.

View 2 Replies View Related

Photoshop :: Stacking Layers Top-to-tail To Create Long Banner Print Of Software Code?

Aug 31, 2013

I have lots of software code (in tSQL, html, JavaScript, XAML, and C#) that I need to print in a long scroll. The scroll will be no more than 440mm wide and as long as it needs to be (though the roll of paper is 45 m long so I’ll need to make sure it is shorter than that).

The resulting code listing is to from part of an exhibit contrasting the ‘sketching’ phase in a multidisciplinary project between design, social science, and software engineering. The exhibit will form part of the Research Through Design conference [URL]...
 
At first I thought I’d print straight from the development environment (Visual Studio 2012 and SQL Server Management Studio) but I realise now that is not possible because
 
1) Both tools assume standard page sizes, and
2) I need to rotate the software code listing 180 degrees so that the end of the listing is at the tail of the paper roll.
 
For these reasons I’m doing it in Adobe Photoshop (CS5, 64 bit, on Windows 8).My workflow for this is verging on the ridiculous.
 
1) If I cut-and-paste the code listings file by file from Visual Studio 2012 and SQL Server Management Studio into Photoshop (or Illustrator) I lose the formatting, for example the coloring of comments differently form variable declarations. (See [URL]...)

Thus Step 1 is to cut-and-paste each file into a Microsoft Word document.
 
2) If I cut-and-paste from the Microsoft Word document into Photoshop I still loose the formatting, and Microsoft Word does not seem to be able to cope with the paper roll nor rotating the print. So I save the Microsoft Word document as a PDF and open that into Photoshop.
 
3) I now have 51 Photoshop files each with one layer containing the text for that ‘page’, though I think it’s an image as it is not editable as text. I then save each of these files.
 
4) Using Adobe Bridge I open all 51 Photoshop files created in Stage 3 and “Load Files into Photoshop Layers” so that I have a new single Photoshop file with all 51 text image layers in.
 
5) The layers sit on top of each other. What I need is for them to sit head-to-toe. I don’t know how to do this without spending a million years selecting layers and moving them by hand.
 
6) If I ever get Stage 5 done I will then group the 51 layers and rotate the result through 180 degrees.
 
7) I will then resize the result to have a width of 400mm and print the resulting file on our banner printer, having first calculated the resulting paper ‘height’ and turned off the automatic paper cutting.
 
So my questions are:
 
1) Is there a better way of doing this?
2) I can see the Photoshop actions that will align layers by their tops, their bottoms, or their centers but how do I automatically align them so that the bottom of layer 1 touches the top of layer 2, the bottom of layer 2 touches the top of layer 3, etc.?

View 1 Replies View Related

CorelDRAW X6 :: Stacking Docking Windows

Apr 4, 2012

Work_Area.JPG

In X5 I was able to easily stack two window dockers on top of each other by double left clicking each title bar of the floating dockers. All subsequent dockers would automatically stack on top of the top most docker. How do I do this in X6? Refer to the attached file to see what I mean. My docking window are stacked to the right of the workspace.

View 3 Replies View Related

AutoCad :: Turn Off Fraction Stacking

May 26, 2011

I initially told AutoCAD to stack all of the fractions but I think I have since changed my mind. Where is that setting that I can turn it off in my template file so all new files will not stack fractions? I assume that setting will disable it for text and dimensions?

View 2 Replies View Related

Lightroom :: Stacking Some Preset Filters In 4?

Jul 20, 2012

Is there any way to stack preset filters on photos?
 
I remember back in Lightroom 3, you could select some filters, like Cold Tone, then select another filter and would apply itself on top of the Cold Tone filter.
 
Now, it seems in Lightroom 4, every time you select a filter, it completely overwrites all the settings of previous ones.

View 7 Replies View Related

Xara :: Stacking Feature For Macro Photographing

Jan 14, 2013

I am wanting to focus stack a number of images on top of one another while using macro shots. I could not find if this is feature available in any Xara product. The is key to creating multiple focal planes when in macro mode. This has been a feature in Photoshop. [URL]

View 1 Replies View Related

Revit :: Annotations - Enable Auto Stacking

Aug 19, 2011

While annotation in Revit Architecture how to enable autostack dimensions for fractional dimensions such as 1/2".

Find the attached file as done in Autocad ..my question is how does one achieve the same in Revit Arch???

View 3 Replies View Related

Illustrator :: Possible To Reverse Stacking Order Of Several Objects

Mar 6, 2013

Possible to reverse the stacking order of several objects?

View 8 Replies View Related

Lightroom :: Stacking / Unstacking Commands Are Missing?

Oct 27, 2013

I cannot see or Unstack any of the stacks in my catalogs. There is no Stack/Unstack command in either the menu or right click option. Where are the commands for Stacking/Unstacking? I can make a Virtual copy... and it tells me there are 2 others... but I can't see them or Unstack them.

View 1 Replies View Related

Lightroom :: Stacking Options In The Export Dialog

Oct 3, 2012

What happened to the stacking optons n the export dialog when adding the exports back into the catalog? After watching Jared Platt's creativelive course, I started creating my PSD's by exporting them in bulk, adding them back into the catalog and stacking them on top of the original raw files. After updating to LR 4.2 I don't see the option in the export dialog any more.

View 11 Replies View Related

Photoshop :: CS6 Stealing Focus In OSX?

Jul 25, 2012

This happenes often, but not consistently.I'm using CS6 (regular) with OSX Lion, 16GB RAM.
 
Once I have a few files open, Photoshop starts "stealing" the cursor focus, which is to say if I go to any other application, as soon as I make one click, PS jumps into the foreground and becomes the active application. The click I made in the other app was applied, and I can see it when I go back to that app, but as soon as I click again, Photoshop pops back into focus.
 
The only workaround I've found is minmizing PS while I use other apps. Or closing it and restarting it. Sometimes just reducing the program window works, and sometimes not.

View 7 Replies View Related

Photoshop :: Change Focus

Sep 7, 2008

I have taken some netball sport photographs where the camera's automatic focus failed to lock onto the player. Rather, it locked onto the background spectators on the edge of the court. Consequently, the player is blurred. I have tried "lens blur" filter and "distortion lens correction" and even "spherise" without success.

View 27 Replies View Related

Photoshop :: Focus This Picture?

May 1, 2005

One of the pictures I took of a friend isn't focused well, can someone please focus it for me here?

I tried myself but the photoshop unsharp mask didn't work so well

Is it even possible to focus this using computer programs?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved