Photoshop :: When Opening Image Without Tab View - Open With Only A Portion?
Sep 19, 2013
I having an issue with CC.When electing in the preferences to not open image in Tabs. The images open with only about 25% of the image area showing. Forcing me to (command) 0 for full to screen preview or (command) +/- to see the image.I am not talking about seeing the image at 100% resolution just the entire image within the floating window without having to command before view.
Sidenote: Adobe Customer Service is all based in India. I spent 4 hours on the phone only to hear that this is that way photoshop works. There would be no logical explanation for this. Since the first version of Photoshop this has not been the case.I think this should be called view porn with wife in the room mode. Other than that I see no point.
View 1 Replies
ADVERTISEMENT
Nov 22, 2013
using element 11 after opening a raw image the raw image editor will not open
View 3 Replies
View Related
Jun 12, 2012
I have a trial of CS6, and I haven't been able to use it yet because whenever I try to open an image, it automatically goes to a image of black and white checkered squares and how to change it to the original image! I figured out that it is because it is in RGB color, which I thought was the best color to have it in. Any other color mode works, but WHY won't RGB work??????
View 2 Replies
View Related
Nov 12, 2013
I have disable the application frame in Photoshop CC and now all new windows open up in the top left corner of my screen BEHIND all of the brush and tool setting windows. How can I change this?
View 3 Replies
View Related
Jan 10, 2013
Is there a way to have a view in a sheet that displays a few specific components of an master assembly? There is a motor/gear-box assembly within my master assembly that I don't want to make a separate assembly for BOM purposes, but I want a .ipn view with the motor/gear-box "assembly" exploded. I tried making everything else in the master assembly "not visible" for the particular .ipn view, which works fine, but if I add or replace anything in the master assembly, those additions appear in the motor/gear-box .ipn and screw up the view.
I could just make a whole new assembly for the motor/gear-box and use that for the exploded view, but I would rather the view update to reflect slight changes I make in the motor/gear-box "assembly" from within the master assembly.
So can I create a .ipn view and say, "I want these particular components of an assemly to appear in this view but nothing else"?
View 5 Replies
View Related
Feb 8, 2012
I didn't see any way to view technical information about the currently open image. Is there such a dialog, and if not, can you add it to the next version ? Would really come in handy, especially if you can additionally add complete EXIF data viewing/editing support in the same properties dialog. If this latter bit is too much, even a basic dialog displaying the image properties would be very nice indeed.
View 10 Replies
View Related
Apr 4, 2012
I have a PNG image with only one layer as a start point. It has a faded map on it.
I have a second PNG image with a hex grid on it. I do colour to Alpha to establish transparency on the hex grid for white filled hexes (others are not filled with white).
Now, I wish to overlay a portion of the first image with the faded map with the non-transparent part of the second image.
So I select by colour (for the hexes not filled with white) on the second image (the overlay) and I then paste to the first image (after creating a transparency layer and selecting it to receive the overlay).
I see the desired overlay section (minus any transparent stuff as expected), however it is centered over the map in the first image, not where I want it to be. It is a floating selection and must be anchored. So I select the anchor icon in the layer dialog and I think I anchor it into the transparency layer on the first image (that's what I'm trying to do anyway).
And then my problem:
I want to move the thing I just pasted in to the right place with respect to the underlying faded map. I attempt to use the move tool, but all I move is the background map (pretty much the opposite of what I want).
Nothing I do seems to let me reselect the pasted-in overlay so that I can move it.
Why I can't ever reposition the pasted in overlay? It should be in the transparency layer I created but even if I select all, I don't seem to be able to move anything other than the background image.
View 2 Replies
View Related
Nov 11, 2012
We like to allow user to select a rectagular area in modal scpace. Then the code creates a paperscace viewport in a spcified layout. The viewport will show the selected area. find the old VBA code that achived this and the .net code I am trying with. .Net code always gives some exception.
VBA Code
'Lets find the center of the viewport in paperspace.
Dim center(0 To 2) As Double
center(0) = newWidth / 2
center(1) = newLength / 2
center(2) = 0
Dim lay As AcadLayout
For Each ent In ThisDrawing.layouts
[code].....
View 2 Replies
View Related
Sep 17, 2008
Does anyone know how to blur a portion of an image in gradient-like fashion to give the impression of an unfocussed lens? Can you do it with a transparent layer mask?
View 4 Replies
View Related
Feb 5, 2005
I need to move a portion of a jpeg image (a logo) a little bit to one side, then I will fill in the empty space. Do I need to save it as a .psd first? And which tool do I use?
I was trying to use one tool, not sure which one, and it told me the layer was locked. I couldn't figure out how to unlock the layer.
View 8 Replies
View Related
Oct 3, 2012
If I wish to rotate ONLY an image, no problem, but if I wish to rotate (custom) only a selected portion of an image, how do I do this?
View 1 Replies
View Related
Sep 9, 2004
Whenever I try to use the Crop Tool, it only stretches out to a small portion of the image and refuses to stretch down any farther.
View 2 Replies
View Related
Nov 26, 2012
I am trying to sharpen a small portion of an image and folling the instructions given in the help files, I cannot locate the "Sharpen Tool" in the tool menu. How I can find this asset in Elements 10?
View 2 Replies
View Related
Oct 13, 2013
way of opening images in CS2 where after opening they will appear in the middle of the CS screen rather then in the top left corner?
I can drag and maximize so they appear in the middle, but on reopening another image they default to the top left again, I would like them to always open in the middle?
View 16 Replies
View Related
Jun 10, 2013
I have a large background image and I want to change (lower) the transparency of the header portion. I can select the portion with the rectangle, but after that I'm stuck. I tried changing opacity but it affected the entire image. I tried selecting Layer -> transparency -> add alpha channel, but that didn't do anything that I could see. How do I make the rectangle portion that I selected somewhat blurry?
Note: I did simply blur out the header portion of my image as one solution. But is it possible to add a layer over just the header part of the image and make that layer semi transparent?
View 4 Replies
View Related
Jan 19, 2012
How do I resize a selected portion of an image?
I would assume that the purpose of a 'selection' tool is to apply edits, effects, and changes to a selected portion of an image without effecting the entire image. But when I select part of my project and go up to the 'image' menu and try to resize just that part, it resizes the whole project. Is there any way I can select something and change its size?
View 2 Replies
View Related
Nov 27, 2012
I'm brand new to GIMP, I just downloaded it to get into some simple pixel art.
I was going fine, but I've run into a problem. I'm trying to select a portion of my image using the rectangle tool, and then move it to a different location using the move tool. However, when clicking and dragging the move tool it shifts the entire image, not just the portion I have selected. I read in the FAQ that you need to press "Enter" to finalise the selection before you move it, but even doing that doesn't work.
This was working fine for me earlier, I'm not sure what I've done to break it. I've tried resetting my tool preferences back to defaults but that has not worked.
View 1 Replies
View Related
Mar 11, 2013
Im just trying to select a portion of an image and the paste it to another layer.
1. Select a portion and copy.
2. Create new layer.
3. Select the new layer.
4. Paste.
The only thing i get is a kind of new layer that says: "Floating selection"
View 1 Replies
View Related
Mar 26, 2013
I need to get the visible portion of a particular layer in the final image.Lets say i have 4 layers and some portion of each layer is visible in the flattened image i would like to get the portion from each of the layers. The input will be in xcvf format.I will ideally want to automate this and output to file in some format looking like this,
Layer1 ---> Co-ordinates of visible polygon from this particular layer in the image .
Layer2 ---> And so on.
How to proceed with the script. I think brute force is to take each non-transparent pixel and and find the same pixel in all above layers if it is not found it will be added to the region.Or something exists like selection from alpha combined with multiple layers ?
Or if there is a way to find out for an image with all layers visible which pixel came from which layer ?
View 3 Replies
View Related
Apr 28, 2011
I have a nice image that has lost the red channel histogram data for about half of the image. It can still be viewed, and the preview is correct.
Can I copy the histogram data from the red channel of the non-corrupt portion of the image? I know it's the red channel because when I open the color data from the corrupted portion the red channel is literally non-existant.
View 1 Replies
View Related
Jun 7, 2013
I am attempting to isolate a portion of the image and then resize it so that portion is larger. I shoot worth a full frame sensor.
View 2 Replies
View Related
Sep 21, 2012
I have scanned hundreds of photos and have put them on cd to view on the tv. I have adjusted some in photoshop and saved as jpgs but for some reason the ones that I have adjusted wont open on the tv. I am wasting discs.
View 1 Replies
View Related
Sep 12, 2013
The entire image is what is blinking, while the photoshop tools remain on.
View 5 Replies
View Related
Feb 22, 2013
why my photoshop 7 all of a sudden will not open? I uninstalled it...restarted my computer...reinstalled 6 & 7(update) and nothing. It did not put a short cut on my desktop either. I tryed to open it from the start menu..still nothing
View 5 Replies
View Related
Aug 22, 2013
My main plug-in will not work with Photoshop CS5 in 64-bit mode. It was working fine for awhile, but now it won't. I took my computer to the Apple store for them to look at it. They said that even though we are telling it to open in 32, the program is ignoring that command and opening in 64 bit, thereby causing my plug-in not to work.
View 1 Replies
View Related
Aug 20, 2013
Windows Explorer set to open image files with PSE11, but when I double click on image in WE it launches PSE11, but I then need to click on Open tab in PSE11 to get it into work window. PSE10 did not have this problem
View 1 Replies
View Related
Sep 6, 2012
When opening existing tiff files in Photoshop 6 they are opening very tiny in top left corner(memory can be anything from 1 mb up to 1 gb. I have to magnify each one seperately right up to see them. Never had this problem in CS 4, tried everything in preferences, view etc etc
View 3 Replies
View Related
Sep 1, 2012
Every time I open Photoshop Elements Organizer it either crashes before opening or very soon after. I am able to use the editor, but not the organizer. I ahve removed all older versions, disabled my anti-virus software, and have uninstalled and reinstalled the program several times with no luck. I have a Dell Laptop with windows 7 - 64 bit operating system and dual quad processor. I have used several versions of Elements and have never had this problem before. The last version that I had installed and worked was version 8.
View 1 Replies
View Related
Jun 11, 2013
How to change the view in CS6 so that it is as sharp as my email program?
View 20 Replies
View Related
Apr 15, 2013
Just upgraded to MAP 3D 2013 - when I click on the icon or type command qvlayout, the view of the layouts opens momentarily but then closes again instantly. Seems to do it randomly - I'll be using the command and it works as per usual but then it starts to act up. Doesn't seem to matter where I place the cursor, or what (if any) other drawings I have open. I've never had this issue with earlier versions..
View 1 Replies
View Related
Aug 22, 2011
I have AutoCad LT and I can't find a way to scroll through folders full of drawings without opening each one. I have the Autocad Viewer but I can't find a way to make it do this, what are you pros doing, I know there has to be something out there. The rest of the world has way to view file i.e. Photoshop has Bridge, Nikon Has View NX, I do photography and there's a ton of ways to view images even at full res .
View 9 Replies
View Related
