Photoshop :: What Processes Are Included In 'save...
Jun 8, 2008
When I save a photo using the Photoshop CS3 'save for the web' command, I resize the photo to, for example, 800 pixels on the long side. It comes back the correct size but sometimes the colors look different (a little red usually). Is this because I was editing the original photo in RGB? Should I convert to profile, sRGB before I save for the Web? Or does Photoshop do this automatically? OR, should I convert to sRGB and then do color adjustments for the web?
View 2 Replies
ADVERTISEMENT
Feb 18, 2013
I have an action which applies Levels and Curves to my black and white TIFFs. At the end it "saves as" a JPEG. Originally it saved them at quality level 10 but I re-recorded the action to set the quality at 12. However, since this change the action keeps saving as into the folder where the image I used for the re-recording was located.
View 1 Replies
View Related
Sep 6, 2012
I have CS5 64-bit version installed and for trial I have now installed CS6, also 64-bit.I noticed one thing, when converting RAW files to JPG from Camera Raw in CS5, then 3-4 files are processed in parallel and therefore the entire process is rather speedy.In CS6 for some reason files are processed only one-by-one.
From system wise, I have a laptop, 64-bit system, 64-bit Windows 7 Home Premium, and two graphics processors, integrated Intel GPU and NVIDIA GeForce 310M.Screenshot from CS5, just to show what I mean:how to get CS6 to process files in parallel also?
View 3 Replies
View Related
Jul 9, 2009
I scan 6x6 negs on an Epson scanner and when they are done they need to be rotated 90 degrees and flipped horizontaly. I set up an action to do this (Rotate, Flip, Save and Close) and everything was going swimmingly - then recently I've started having problems. For example - I've scanned 60 images which I select in Bridge and then open them in PS CS4. I select Automate>Batch and then select my saved action and away it goes. PS chugs its way through the 60 photo's and closes them all (so it looks like they have all been processed), but when I go back to Bridge and it starts refreshing the thumbnails only 30 of them have been rotated and flipped. So then I select the remaining 30 images and batch process them - this time it only processes 15 and so on.
View 3 Replies
View Related
Jan 29, 2013
The following processes: Fill, Stroke, Text Coloring (highlighted selections from chromatic palette), Mask Layer coloring, etc. are all failing unaccountably. When Menu-selecting Fill or Stroke, or when clicking the color wells to access the Color Picker (for text, mask-layer color, etc.) I do NOT get the usual Color Picker window. Instead, the icon instantly changes to the eyedropper (and sometimes the color sampler) icon, all menu options are greyed out, and all attempts to select another tool or do anything at all result in that awful 'doonk! doonk!' sound. I learned, (after a horrible 24hrs of even reformatting my computer to cure PShop) that at least the freeze can be broken by hitting 'Enter', and sometimes only after hitting it many, many times. The command in question then executes without new editing, and is usually useless. I have realized that all of these: Fill, Stroke, Mask/Text color, ALL involve the Color Picker, to which I seem to have been denied access. That last time 2 years ago it involved the Hue/Sat sliderwindow, but at least that seems to be working fine.
To compound and complicate the problem: Duplicate and Print Preview are also failing to offer any kind of editing window before I must inevitably just hit 'Enter' many, many times before the process is executed to whatever settings were last recorded before this problem, and of course, it is useless to me. I can't even resize images on the page before printing them anymore and they end up just zoomed and cropped.
View 4 Replies
View Related
May 13, 2012
When launching a render, the message "background processes initializing / this may take a while" gets stuck more than 70s in CS6, whatever the project, whereas it was never on more than 10s in CS5. We're back to the CS4 delays here.
On a side note, the multiprocessing is a bit weird:
Before it was pretty straightforward : When 10 cores were used for the render, the frames were rendered by batches of 10. With CS6 it's different : A first batch of 3 frames get rendered, then another one of 14 (!!), then I lost track of the process. Is multiprocessing so different in CS6 ?
Mac Pro 12-Core / 32GB RAM
Mac Os 10.6.8
AE MP settings :
2,5GB per core / RAM reserved for other applications : 4GB
CPU reserved for other applications : 4
View 18 Replies
View Related
Mar 26, 2013
I have been finding that when i have a process running that requires some time to complete in LR 4.3 (e.g creating timelapses, or exporting large sets of images, or creating many 1:1 previews), that if my mac goes to sleep these processes stop. When I wake my Mac again these processes start up again though.
After a little reading I seem to have found that the latest mountain lion upgrade has removed a macs ability to check hard drive activity before going totaly to sleep. So previously the screen will be sleeping but processes can run in the background. If what I have read is accurate this is also true for downloads and other processes. Furthermore they go on to say that applications now have to create "power assertions" to keep processes running.
I assume Lightroom does not yet have these? Are they looking into it?
View 1 Replies
View Related
Mar 22, 2013
how the internals of Inventor / iLogic are working.
We have multiple instances of Inventor running on a 12 core workstation so we can push configurations through concurrently - each Inventor instance is assigned its own processor affinity and each instance has its own project which points to seperate directories of Inventor models.
Everything seems to work OK when there are up to 5/6 working concurrently, but as soon as there are more than 6 the iLogic functions seem to grind to a halt - note that the rules are external rules.
For example, this function took 11 seconds to complete when there were 10 concurrent orders processing. :
Parameter("BLANK", "EDGE_FRT_ACTIVE") = "YES"
Similarly these functions took 11 seconds in total to complete :
iProperties.Value("Custom", "M1110900_P1PO") = iProperties.Value("Custom", "BLANK_GDIM") - iProperties.Value("Custom", "PANEL_GDIM")iProperties.Value("Custom", "M1110900_P2PO") = iProperties.Value("Custom", "BLANK_XGDIM") - iProperties.Value("Custom", "PANEL_XGDIM")iProperties.Value("Custom", "M1110900_P1OR") = 1iProperties.Value("Custom", "M1110900_P2OR") = 0
When I run these with less that 6 concurrent Inventor processes, they're are almost instant.
I just don't know where the bottleneck is. I've ruled out :
- Processor (each core never reaches above around 60%)
- RAM (we've got 48GB of RAM, with about 15GB free at worst)
- Disk (disk IO is busy, but it doesn't look like it's the bottleneck)
- Graphics (Inventor is in silent mode, with no UI, so graphics activity is minimal)
From the tests I've done it seems to be the iLogic functions that are the bottleneck. My next port of call is to change the iLogic functions to actual API calls, but I suspect I'll get the same results.
So, my questions :
Is Inventor queing these iLogic API calls somehow (note we're creating a unique instance of the Inventor.Application COM object for each processing thread) ?
Is there an issue with using external rules with nultiple instances?
Dell Precision R5500, Intel Xeon X5690 3.47GHz (x2)
48GB RAM
Inventor 2013 (PDS Premium)
64bit Windows 7 SP1
View 4 Replies
View Related
Jun 18, 2013
Just installed Photoshop CC and Bridge CC has not been installed. If I want Bridge, do I have to pay for it as an additional app?
View 2 Replies
View Related
Aug 28, 2012
I just downloaded the trial version of cs6 extended, but the 3D workspace is not included.
View 3 Replies
View Related
Nov 29, 2013
How do I retroactively change my pix in CS5 to included maximum compatibility. I have checked the box, but it only applies to new saves. I can't import thumbs in LR5.
View 9 Replies
View Related
Dec 30, 2012
Cannot see that Helvetica is included in the CS6 setup I bought. Why is that so? It's a most common font.
View 1 Replies
View Related
Dec 27, 2008
I'm sure i can locate a tutorial for clouds, Just i am recreating this cloud BG effect but i cant find that really nice bright light effect over the clouds and the really bright shine around the human layer.
View 3 Replies
View Related
Aug 28, 2012
I uninstalled Photoshop CS5.1 ME (Middle Eastern) version from my 64bit operating system (Windows 7 Home Premium) and went on to install CS6 EXTENDED after a fresh restart (I also deleted remaining CS5 folders in "Program Files' Adobe directory"). The setup went fine. But, when it finished, it gave an error message saying that Adobe Photoshop CS6 didn't install or didn't install correctly. From there, I copied the error report/log it gave out:
Exit Code: 6 see specific errors and warnings below for troubleshooting. For example, ERROR: DF050, DW063 ... WARNING: DF029 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 6 error(s), 1 warning(s)
----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
[code]...
Photoshop started fine and worked fine (only used it a bit) after the "failed" installation but, the Update option in the Help window was grayed out (trial version, just to let you know). Is that a limitation to the trial version? Or is it straight up an error?
My question is, what did the error report mean and what could be wrong with my currently installed version of PS? BTW, I didn't use Mini Bridge yet, although all of its files are present in the Program Files directory for Adobe.
View 2 Replies
View Related
Jun 17, 2013
In Illustrator I'm using "save for web" to generate a png copy of an Illustrator file. The Illustrator file has copyright metadata, but when I check the png copy the copyright metadata is missing.
Why doesn't the png copy have the same metadata as the original file? Shouldn't the metadata be passed along when using "save for web"?
I applied the metadata in Bridge using the append metadata command.
View 8 Replies
View Related
Jul 22, 2012
I have attached a couple of comic book bubble shapes that have "tails" on them (the little pointy part that you put near the persons mouth who is speaking the dialogue). I'd like to remove these tails and close off the shape so that it's symmetric (as if the tail never existed).
View 9 Replies
View Related
Dec 14, 2011
How many free smart sounds are included with X4 ?
View 1 Replies
View Related
Nov 28, 2011
I noticed I am missing the Project Creator in v. X4...will it be added in an update or did Corel dump it all together?
View 6 Replies
View Related
Sep 24, 2013
Using ACAD 2010
when i set a view using the view manager , the layer visability state is stored, and wenever i bring back this view, new layers are not visable.
is there a way to control which properties should be included with views and which not?
View 0 Replies
View Related
Jul 21, 2013
How can I display images that are not included in any collection (some filter or smart collection)? A smart collection with parameters "Collection - contains - empty field" does not work. Lightroom 5.
View 2 Replies
View Related
Dec 21, 2013
I got this problem during creation of corridor surface boundaries. I would like to create a corridor datum surface using the daylight feature lines, automatically from the corridor surfaces-boundaries dialog box, but the daylight does not appear in the list.
View 5 Replies
View Related
Jun 25, 2013
2013 version. Long story short, I am having problems with pressure networks in my drawing so to simplify things I want to just show the top of the current watermain in my profiles because we are not doing anything with the water main, though it needs to be shown in the profile. To do this I created some points where the watermain is and made their elevation 1.8m lover than the existing surface at those points (due to the 1.8m of cover the watermain has).
I then created a surface using those points and an outer boundary surrounding the points. For some reason the surface stops at one point and doesn't continue to the rest (about 5 more points). So when I create my profile the surface stops short. The points are included in the point group the surface uses, and the outer boundary doesn't cut them out either. Not sure why the surface isn't referencing those points.
View 5 Replies
View Related
Jul 28, 2011
We created an sdf of contours. We are using mapi.port to try to bring some of those contours into another drawing. We indicate the crossing window, but only those lines entirely inside the window come into the drawing. Any line that crosses the window are not included.
We draw the window from left to right.
Why aren't we getting all the lines that cross the window?
View 7 Replies
View Related
Apr 25, 2011
why I cant sweep this region. I have tried to flip ucs move region etc.
M10x20.dwgSweep.jpg
View 2 Replies
View Related
Feb 10, 2013
Is there a way, in finder, to enumerate the catalogs an image file is included in?
I've run into some finder organization trouble when an external drive died. I want to be able to select an image and find out which catalogs it is included in and/or if it is even in a catalog.
View 1 Replies
View Related
Dec 21, 2013
How can I EXCLUDE particular folders/files from being included in the Lightroom 5 catalog?
I want to be able to specify paths and/or filename patterns that should NEVER be indexed in the catalog: not that they don't show up under certain circumstances, just that they are NOT THERE (in the catalog) to begin with!!
I also do NOT want to have to respecify these criteria when "synching" the catalog; criteria should be PERMANENT (or at least 'til they're changed in LR preferences).
View 8 Replies
View Related
Dec 20, 2013
I just started work in Civil 3D 2014 and was going about creating different point groups for some volume calculations so I could create different surfaces. I noticed after creating my first point group that the NO DISPLAY group could not been seen in the Prospector under Point Group. Now in previous editions there has always been a NO Display Group so you can easily view your different groups. Is this something they changed in Civil 3D 2014 or was the installations faulty?
View 7 Replies
View Related
Jun 5, 2012
getting virtual Components to be included in an Excel output of an assy BOM. I have an existing macro (see code below) that exports the StockNumber, partNumber,Description and an occurrence count of each item to an Excel spreadshet. It all works fine except for Virtual Componenst which are not included. It seems that because no file is created that the VC item can't be included in the Excel doc.
Sub Assy2Excel()
Dim oAssDoc As AssemblyDocument
Set oAssDoc = ThisApplication.ActiveDocument
Dim SIPropSet As PropertySet
Set SIPropSet = oAssDoc.PropertySets.Item("Summary Information")
Dim rev As String
rev = SIPropSet.ItemByPropId(kRevisionSummaryInformation).Value
If oAssDoc.DocumentType <> kAssemblyDocumentObject Then
MsgBox "The Active document must be an 'Assembly'.", vbExclamation
Exit Sub
End If
If MsgBox("The generated list is for the use of the Purchasing Department. It counts all of the BOUGHT & MADE parts in the assembly. Some manual editing will be required to 'clean up' the list.
", vbYesNo + vbQuestion) = vbNo Then
Exit Sub
End If
Dim oDocs As DocumentsEnumerator
Set oDocs = oAssDoc.AllReferencedDocuments
[code]....
HP Z420 Workstation, Windows 7 x64, 64 GB Ram
Intel Xeon E5-1620 @ 3.60 GHz, ATI FirePro V7800 2 GB
3*Dell 2007Fp monitors, SpacePilot
Inventor 2013 PDS Premium & Service Pack 2 with Update 3
Vault Workgroup 2013 with Update 2
View 2 Replies
View Related
Mar 1, 2013
check and see if there is a "Modeldoc.cuix" file included in your Civil 3D directories anywhere?
This would include under your user profile, and under C:Program FilesAutodeskAutoCAD Civil 3D 2013
View 9 Replies
View Related
Jan 23, 2013
What all files must be included to email a simulation report in 2013?
View 1 Replies
View Related
Jan 9, 2014
I'm preparing for our office wide install of Infrastructure Design Suite 2014 so we can begin training/using Civil 3D 2014.
I’m reading through readme file for the Architecture-MEP 2014 Object Enabler & noticed that it’s installed as part of the normal installation of all AutoCAD 2014 based products, including Civil 3D…woohoo! Unfortunately, the Structural & Plant OE’s don’t appear to have a readme file. Are these also installed as part of the normal installation of C3D 2014? Or will they need to be installed separately?
View 7 Replies
View Related
