AutoCAD Inventor :: What All Files Must Be Included To Email A Simulation Report In 2013
Jan 23, 2013What all files must be included to email a simulation report in 2013?
View 1 Replies
ADVERTISEMENT
Photoshop :: CS6 EXTENDED Install (WINDOWS) Error Report Included?
Aug 28, 2012I uninstalled Photoshop CS5.1 ME (Middle Eastern) version from my 64bit operating system (Windows 7 Home Premium) and went on to install CS6 EXTENDED after a fresh restart (I also deleted remaining CS5 folders in "Program Files' Adobe directory"). The setup went fine. But, when it finished, it gave an error message saying that Adobe Photoshop CS6 didn't install or didn't install correctly. From there, I copied the error report/log it gave out:
Exit Code: 6 see specific errors and warnings below for troubleshooting. For example, ERROR: DF050, DW063 ... WARNING: DF029 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 6 error(s), 1 warning(s)
----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
[code]...
Photoshop started fine and worked fine (only used it a bit) after the "failed" installation but, the Update option in the Help window was grayed out (trial version, just to let you know). Is that a limitation to the trial version? Or is it straight up an error?
My question is, what did the error report mean and what could be wrong with my currently installed version of PS? BTW, I didn't use Mini Bridge yet, although all of its files are present in the Program Files directory for Adobe.
AutoCAD Inventor :: Using IV Simulation FEA Results As Loads In A New Simulation
Nov 29, 2011IV 2011.
I have an assembly with a FEA simulation result. I can run a report and get the reaction forces and moments at each constraint. I would like to run a new simulation with different constraints and use the reaction results from the first simulation as loads in the second one.
Currently I do this by running a report on the 1st simulation to get a table of the reaction results. I then manually add those forces to the 2nd simulation. This takes time to type and the forces must be edited each time I re-run the 1st simulation.
Is there a way to use parameters to automate this?
AutoCAD Inventor :: Unresolved File References 2011 Simulation Still Trying To Find Files
Apr 4, 2011I have unchecked resolve file references, etc, and still basically spends 5 minutes looking for files i told it not to look for. Why doesnt it just open the assembly or drawing, without waiting for ever?
View 3 Replies View RelatedLightroom :: 5 - EXCLUDE Particular Folders / Files From Being Included In Catalog?
Dec 21, 2013How can I EXCLUDE particular folders/files from being included in the Lightroom 5 catalog?
I want to be able to specify paths and/or filename patterns that should NEVER be indexed in the catalog: not that they don't show up under certain circumstances, just that they are NOT THERE (in the catalog) to begin with!!
I also do NOT want to have to respecify these criteria when "synching" the catalog; criteria should be PERMANENT (or at least 'til they're changed in LR preferences).
AutoCAD 2013 :: Object Fields Report Incorrect Position
Nov 16, 2013I have attached it (AutoCAD R2014). I have placed several object fields in this drawing (for blocks, even a node), and asked for an x position. I got one, but they are all slightly off.
View 2 Replies View RelatedAutoCAD 2013 :: Print Out Report Of Drawing Custom Properties?
Jul 31, 2013If we're in a drawing and pick the AutoCAD application button > Drawing Utilities > Drawing Properties we can, and do, use this to enter custom propterties. Is there any way to print out a report of a drawing's custom properties? Ideally, i would like to be able to select multiple drawings and print a report of each drawing's properties.
View 9 Replies View RelatedAutoCAD Inventor :: Getting Virtual Components To Be Counted / Included In An EXCEL BOM
Jun 5, 2012getting virtual Components to be included in an Excel output of an assy BOM. I have an existing macro (see code below) that exports the StockNumber, partNumber,Description and an occurrence count of each item to an Excel spreadshet. It all works fine except for Virtual Componenst which are not included. It seems that because no file is created that the VC item can't be included in the Excel doc.
Sub Assy2Excel()
Dim oAssDoc As AssemblyDocument
Set oAssDoc = ThisApplication.ActiveDocument
Dim SIPropSet As PropertySet
Set SIPropSet = oAssDoc.PropertySets.Item("Summary Information")
Dim rev As String
rev = SIPropSet.ItemByPropId(kRevisionSummaryInformation).Value
If oAssDoc.DocumentType <> kAssemblyDocumentObject Then
MsgBox "The Active document must be an 'Assembly'.", vbExclamation
Exit Sub
End If
If MsgBox("The generated list is for the use of the Purchasing Department. It counts all of the BOUGHT & MADE parts in the assembly. Some manual editing will be required to 'clean up' the list.
", vbYesNo + vbQuestion) = vbNo Then
Exit Sub
End If
Dim oDocs As DocumentsEnumerator
Set oDocs = oAssDoc.AllReferencedDocuments
[code]....
HP Z420 Workstation, Windows 7 x64, 64 GB Ram
Intel Xeon E5-1620 @ 3.60 GHz, ATI FirePro V7800 2 GB
3*Dell 2007Fp monitors, SpacePilot
Inventor 2013 PDS Premium & Service Pack 2 with Update 3
Vault Workgroup 2013 with Update 2
AutoCAD 2013 :: Moving Files To Different Drive 2013 Inventor Suite
Jan 22, 2013I have 2013 inventor/mechinical a cad did not have enought memory on c: drive added another hard drive E: need to move my files to the e drive. single seat all on this computer.
View 4 Replies View Related3ds Max :: Menus Became Square Frames / Included Recently Opened Files Names
Aug 18, 2013Today I started up my computer,ran 3ds Max 2010 64bit on windows 7,the 3ds Max menus became square frames,included recently opened files names...I repaired and reinstalled 3ds Max,but it fixed nothing...what else can i do?
View 1 Replies View RelatedAutoCAD 2013 :: Send Command - Email Sent Without Text
Jun 4, 2012I have a problem with the Send Command, when I use it the email is sent without text.
View 9 Replies View RelatedAutoCad :: How To Print PDF Files To Email
Mar 29, 2011I have version 2002. How can I print to a pdf file so I can e-mail those files to customers?
View 5 Replies View RelatedAutoCAD Inventor :: FEA Simulation Area
Dec 11, 2013I've created a successful FEA simulation in Inventor 2014 and obtained results. But I want to see the highest stress in a defined area that is smaller than the entire part (I have some stress concentrations that are throwing off my 'max'). Is there a way to probe an area instead of just a point? I'm tired of creating a dozen probes to find the 'local max'.
View 8 Replies View RelatedAutoCAD Inventor :: One Way Rotation Simulation
Jan 23, 2013How to create or how to set a one way rotation joint as a one way bearing will work on real life, is this possible?
View 9 Replies View RelatedAutoCAD Inventor :: Simulation Results In API?
Apr 30, 2012I'm developing a program which runs several simulations and obtains the results automatically.
I'm using the dynamic simulation API created in Inventor 2013. For that I use the GetResultValues(ByRef values() as Double) method of the class DSResult.
I used the method inside the VBA of inventor and worked well. But when I wrote the program in Visual Basic Express 2010, the method doesn't return anything.
I share an excerpt of the
Dim odoc As AssemblyDocument
odoc=invApp.Documents.Open(testPath, True)
Dim dsman As Inventor.SimulationManager = odoc.ComponentDefinition.SimulationManager
Dim dssim As Inventor.DynamicSimulation = dsman.DynamicSimulations.Item(1)
Dim oJoints As Inventor.DSJoints = dssim.DSJoints
oJoint = oJoints.Item(1)
[code]....
The method GetResultValues(values) should modify 'values' to a time,value vector.
It works well inside Inventor, but doesn't in the program in VB, although it runs the simulations and does everything else right.
AutoCAD Inventor :: Frame Generator Report
Jun 12, 2012Is there any way in standard inventor to find what sketch is related to a frame generator member?
View 6 Replies View RelatedAutoCAD Inventor :: How To Use Dynamic Simulation For Nut And Bolt
Oct 5, 2013How to use dynamic simulation, i am creating a bench vise and woud like to animate it going in and out how would i do that?
View 1 Replies View RelatedAutoCAD Inventor :: Suppressing Features In Simulation
Sep 29, 2011when in simulation, if you suppress a feature is it totally taken out of the simulations workings?
I.e. if I was working on a project like some weighing scales and I had a load of objects on the scales and I then suppressed some of the objects, will the scales rise up a little to counteract the reduced weight?
AutoCAD Inventor :: Gravity Experiment Simulation
Oct 30, 2012Is this type of gravity experiment possible with dynamic simulation?
[URL].........
I made the cone ramp and double cone but the cone either goes the wrong way or only moves a few inches in the correct direction and then gets stuck. I’m using 3D Contact Joints and Spatial Joints and Gravity Force.
Version = Inventor Pro 2009
AutoCAD Inventor :: Dynamic Simulation - How To Add New Load Using API
Dec 11, 2013I am trying to discover the dynamic simulation, so I need to know is that possible to create a new Load(Torque, Force) using API?
View 2 Replies View RelatedAutoCAD Inventor :: Motion / Simulation Settings
Jul 13, 2012i'm developing a hexapod robot and i want to simulate the motion of the robot's leg. The mechanical of robot's leg contain a servo motor that variate your angle between 0 to 330 degre. How can i delimite the angle of servo's rotation?
Other questions, is about the fixation with bolts. How can i do for the motion simulation respect the connection of the bolt? when i do a dynamical simulation the parts that contain bolts don't stay joints, i have to do a rule of fixation with constrains?
AutoCAD Inventor :: Dynamic Simulation Atomization In API?
Apr 10, 2012I'm designing multiple elements for a vehicle. I need to evaluate multiple dynamic results of multiple possible designs. All the design is parametric so it modifies quickly but I can't find a way to run the dynamic simulation multiple times automatically and get the results from the output grapher for each simulation.
I am trying to do it via API but can't find the class of the dynamic simulation environment in the Object Model Chart to program it via .NET.
AutoCAD Inventor :: Dynamic Simulation Menu
Sep 26, 2012I have installed inventor 2011 on my laptop, but the dynamic simulation menu does not appear even though I 've been many times to install it.
View 9 Replies View RelatedAutoCAD Inventor :: Unable To Create FEA Simulation
Oct 21, 2011I have a very simple part I am trying to check using FEA; however when I get into the Simulation environment and click 'New Simulation' from Ribbon nothing happens.
The part in question is just a simple cylinder (I'm verifying what would be the best meshing spec to use in a larger assembly).
AutoCAD Inventor :: Using Trace In Dynamic Simulation
May 25, 2013I am playing with traces in dynamic simulation and in the output grapher i get values for position like:
P
P(x)
P(y)
P(z)
and in the graph i get some values of the position but i am unsure on where the datum is at this point. I would of thought that the datum would be where the trace is attached? Where the datum is based and is it possible to set a relative datum to when the trace is set?
AutoCAD Inventor :: Error Getting Simulation Results Via API
Apr 18, 2012I'm running several dynamic simulations via the API. Then I am getting the results to write in a text file. I want to know the force in a joint so I get the vector of values via
Dim oResults As DSResults
Dim oResult As DSResult
Dim value() as Double
Call oResult.GetResultValues(value())
this vector is a time, force vector but when I verify mi data against the Output Graphe all the decimal points from the force information are gone.
Example:
In Output Grapher
Time (s)Force(N)
0.0118955.66
0.0219500.88
In the vector from API
0.01
1895566
0.02
1950088
is there a way to correct this? I'm getting many force and movement info, so I don't know which ones are reliable.
AutoCAD Inventor :: Applying Force In Simulation
Nov 16, 2011Is it possible to set a time delay on an applied force in simulation 2012? I would like to apply a force for a set amount of time?
View 5 Replies View RelatedAutoCAD Inventor :: Dynamic Pressure Simulation
Mar 20, 2012I have a question regarding simulations in Autodesk Inventor.
For example I have such part:
It is a plug made out of brass. I want to test if it will be able to withstand specified pressure. So I set up where is it constrained - on thread.
And set up pressure from inside on the cap to be 16 bar (1,6 MPa). And also assign materials. And there goes simulation . Everything seems alright. I want to run little bit different analysis. When pressure would be variable.
For example I will have pressure going from 12 bar to 16 bar, and such simulation will be running for quiet long time (as an example pressure will be 12 then raises to 16 then goes to 12 again and then raises to 16 again). I want to know after what time will this plug fail and will be destroyed? I mean i want to know when METAL will get tired and will be destroyed? I was just wondering if such a simulation is possible to be made in Autodesk Inventor?
AutoCAD Inventor :: Measuring Forces During Simulation
Jan 7, 2013If you can imagine a cylinder sliding on curve joint. Let’s say the curve is in the XY plane. In the output grapher it is possible to display the force as the cylinder slides around the curve. However if I understand it correctly the magnitude of the force will be in the direction perpendicular to the point of contact between the cylinder and the curve? In which case is it possible to actually find out the individual X and Y components of the force? That is to say the magnitude of the force in the X or Y plane of the curve?
View 1 Replies View RelatedAutoCAD Inventor :: Glass Panel Simulation
Jan 18, 2013Let me preface this by saying that we work mostly in the metal fabrication industry dealing with the elastic deformation of plastic materials that are isotropic so this question is a bit above my pay grade here.
Is it possible to simulate the stresses in a piece of glass in a simple beam scenario in Inventor (1/2" x 48" x 130" Tempered Glass)? I have a client that wants me to design a conference room table for him but I am highly uneducated about glass.
Is it possible to simulate? If not, is it possible to "fake" it and get semi-reliable results? We're at the conceptual stage here and we're curious which of our designs have a greater possibility of surviving the design validation process (which will include a glass expert at some point).
AutoCAD Inventor :: Blue Screen While Doing A Simulation
May 21, 2012Every now and then, but recently more then I want, I get a blue screen while doing a stress analysis.
I have a pretty simple assembly with just 2 parts in it. One of these parts is built as a multibody part. It can be that the blue screens started to occur after I made a multibody design, however I am not sure about that. I downloaded and installed Inventor R13.