May i load a monitor profile in photoshop?for example , i did a test and i calibrated my monitorand i would use the *.icc in photoshop is there a way to keep the monitor uncalibrated but load this profile in photoshop and work in photoshop with a monitor profile
Â
in short it could be a non sense i would love to know only if i can load a calibrate monitor profile in photoshop and if yes , how can i do?
In X3 you could open "Color Management" window, click on the screen icon and load the color profile of your monitor, but in X5 this window has changed and there is now option for the monitor color profile so I can't find how I could import it.
View 10 Replies View RelatedIs it possible to use a load statement in a profile to automatically load/unload a cuix?
View 7 Replies View RelatedInstead of Photoshop, et al using my Win7 x64 ICC monitor profile, I would like to set it manually, as I'm able to do in other applications. Is this possible?Â
Â
The reason why is that I have a Dell U3014 and using the software that comes with it, I want to use its sRGB mode (and an associated sRGB profile from my Spyder 4 set as my Windows default) for all of my regular apps, and AdobeRGB mode (and profile) for my CS and other color-aware apps. My other apps DxO, PhotoMechanic, Canon SLR apps, etc. let me choose the profile.
Every single time I power up CS5 I get an error :"The monitor profile "Samsung - Natural Color Pro 1.0 ICM" appears to be defective. Please rerun your monitor calibration software.No other application complain about this.
Â
The monitor is a Samsung SyncMaster 226CW..If I go .. Control Panels Color Management..I can see that there is a profile "Samsung Natural Color Pro 1.0 ICM (default) file SM226CWicm..It is the ONLY profile listed.
Â
I deleted the profile.. I am then prompted to chose a new profile .....from the list shown there is the "Samsung Natural Color Pro 1.0 ICM"..I select that.Then next time I start CS..same error message again.
Just purchased a new monitor for the recording studio...an LG L227WTG FLATRON LCD. Went w/ the glossy screen technology (or whatever LG dubs it) in order to have mo better detail & clarity when working on the graphics side of the equation...Photoshop, Illustrator, etc.
But, speaking of Photoshop...when I open it now...I get a warning message that reads: The Monitor Profile "LG 227W" appears to be defective. Please rerun your monitor calibration software.
What does this mean (aside from the obvious)?
This will be my first high quality graphic experience in PC land; &...since I'm also designing not only my own CD jackets & insert booklets (on the CMYK end)...I'm designing my own web pages (on the RGB end). I need to get this right, so my presentation colors don't look silly.
This is an FYI for others trying to solve the problem I've been pulling my hair out over!
I was receiving a warning on startup of Ps CS3 "The monitor profile 'LCD color management and conversion' appears to be defective. Please rerun your monitor calibration software". This was after using my EyeOne to calibrate my monitor. I've seen variations of this problem on various forums and websites, but none helped my particular problem.
FINALLY, it occurred to me to check the default profile for my SECONDARY monitor! That one was using a stock profile that came with the monitor, but that was what was triggering the error message. Once I replaced that with the same profile as I created and was using on my primary monitor, Ps stopped displaying the warning.
If I recall from months ago when I researched and bought my colorimeter, my model will only calibrate one monitor, so I can't use it to create a unique profile for the second monitor.
can you turn that pop-up message "The monitor profile "Samsung - Natural Color Pro 1.0 ICM" appears to be defective. retrun your monitor calibration software" on and off.
Â
I may have checked the "don't show this message again" ? If so...can I re-enable the the profile warning message and how ? Or...does this pop-up only occur if there is a monitor profile issue when Photoshop starts ?
I have a vintage macBook pro running Snow leopard, PS CS3 & DW CS3. I have a lenovo Business computer-Vista and a Dell-XP with PS 7. My monitor died and I bought a Dell U2412 which I calibrated with i1 Display 2, the grey scale was good & neutral on every 3rd gradation but wandered dramatically in between measured targets, the colour was either good for the skin and dull on the primary and secondary colour targets or over saturated on the skin and too red in the blues and mag (but with correct Sat on primary secondary). This monitor a good colour out of the box in reviews (but not on a mac, Dell profile loaded but no drivers for mac), so I tried it on the lenovo with a greyscale I made on the mac, the Phase One Lowres Colour Checker and a couple of profile targets I got from commercial labs close by (all had primary-secondary swatches greyscales and some natural examples). The greyscale was good very neutral (black grey meld together) and the skin colour and primaries were fine, this is viewing them in paint and windows photo gallery. Double checked them with the Dell, inside and out side PS they looked great using the Dell supplied profile and terrible with a custom profile by i1 Display 2!
I up graded to the i1 Display pro, on the mac the greyscale was very good all round, far better, the skin was good as were all targets but the blue (255 blue in PS is normally very deep 74% tone in the info pallet and very intense) is rendered, appears that is as a med cobalt blue with a visual tone of I would say no more that 50% and while a bright blue far from intense. The magenta is the same a soft pure pink. They measure as they should though 255 blue and 255 red and 255 blue for the mag. I installed and profiled the lenovo with exactly the same settings and it looked great all over! So a Mac PC issue? probably not the Dell exhibits the same behavior when using the i1 Display 2 profile and the Dell U2412 profile. I made a double swatch (blue and magenta) in PS to e-mail to myself so I can monitor the problem a little easier using all 3 computers, as I attached it to the e-mail and I see it looks great in mail, very strange. I loaded the image on a webpage and in DW and put it on my site, all browsers display it as PS does soft. IE on the lenovo displays it as it should. On the mac Preview also displays it correctly.
Recap:
The U2412 is capable of displaying the colours.
The custom profile is loaded as the system profile on the mac and the PC.
The mac displays the 2 colours correctly in Mail and Preview.
The mac does not display the colours correctly in PS DW or web browsers.
The profile is being used by PS; The greyscale is perfect, opening the display preferences window and changing profiles shows a difference.
The profiles are loaded but are changed or corrupted in certain applications.
I cannot be the only one to bring a macBook pro, Snow leopard PS and i1 Display Pro together, am I the only one with a problem?
I have this calibration software Spyder Pro. I calibrate my Monitor once a month, and I have no color problem. Few days ago,I had this Windows Update, Samsung Diplay SyncMasterMagic, which was Optional. I did downloaded, and now when I open Photoshop CC, I get this Message: Adobe Photoshop CC. The monitor Profile problem. I have attached the Error Message
View 2 Replies View RelatedAlthough the following is usually discussed in conjunction with Multiple Monitors, I believe it may be relevant in some single monitor environments as well. As far as I can see, PS CS4 uses the Windows XP Default monitor profile (Display Properties > Settings > Advanced > Color Management) as its Monitor Profile (just to be complete here, in the absence of any entries under Color Management, PS uses the sRGB space as the Monitor Profile). I have not been able to find any other way to control which monitor profile PS will use. Hardware monitor calibration tools, as well as the Wincolor applet, make it possible to load the LUT on the fly, but neither my Spyder3 Elite software nor Wincolor actually update the Windows Default monitor profile definition. This means that without manually making the change in the Windows Color Management section, there is no way to tell PS to use a particular monitor profile, thus making it impossible to create a correct relationship between the LUT contents and the PS monitor profile. Making the manual change to Windows is not only tedious, but also makes it essential to REMEMBER to do this every time there is a to be profile switch, which may be necessary due to using one's laptop with different external monitors in different locations, or even just different profiles to compensate for varying ambient light conditions (e.g. one profile for natural daylight, another for artificial lighting at night). Contrary to several comments I've encountered in various posts, I am not able to assign a different Default profile to each monitor at the WIndows level. Perhaps this is possible with some video cards/software, but not with my Nvidia GeForce 8400M G and the latest software.
View 8 Replies View Relateduse a Mac for PS, but I have Adobe Gamma installed as Control Panel on my Windows XP machine, so I can correct the monitor balance.
After I run the Wizard, I save a new sRGB Color Space Profile.icm in WindowsSystem32spooldriverscolor.
But every time I restart Windows, it resets itself, and my monitor balance is off - much too light.
How do you get Windows XP to load this profile each time?
I have recently purchased LG IPS225V Flat Screen monitor and installed CS5 trial version. But as I try to run it I get an error message that the "LG IPS225V monitor color profile is corrupted, run the calibration wizard" and then there are two buttons labelled: "Ignore Profile" or "Use Anyway". This is a new monitor and it is considered to be providing the best factory calibrated color.
I have other free editing programs like Picasa 3, Pain.net etc.
We have AutoCAD Architecture 2011. By default, our profile does not load the AEC commands. I am looking for a way to enable them in session. Short of this I am looking for what controls them.
We have a custom CUI that loads, it was created from the default AutoCAD one. If I switch to the AutoCAD Architecture profile while in AutoCAD the AEC commands do not become active. If I launch AutoCAD from a shortcut that specifies AutoCAD Architecture profile then the AEC commands do load. I have tried loading the AECARCHXOE cui as a partial CUI in our custom CUI but that does not load the ARC commands (either in session or as a new session)
what controls weather the AEC commands load?
I have installed AutoCAD (Map 3D 2012) onto a users machine. When I run the software, I get a message box appear saying it cant load the profile...
I went into the registry and noticed that his registry is missing a lot of keys for Map 3D (attached)
I have attached a copy of my registry for comparison.
What would typically cause this? I have tried to delete the registry entry and let it re-configure, but i get all sorts of errors (Internal Error 2738).
I should probably mention that I am using a profile switch in the shortcut.
I would like to know how to add a lens to the lens correction profile in LR5. I would like to add my Canon 135f/2.
View 4 Replies View RelatedOn starting autocad, before anything else appears an error box pops up saying "Unable to load Profile file, some profile information saved in the last session may not be restored". Click to accept the message and autocad starts normally with the exception that the ribbon doesn't show -at all. The user then switches to the classic workspace and back again and the ribbon will appear as expected.
The user, I believe, has local admin rights. I've tried uninstalling and reinstalling to no avail. My next step, is a last resort, which will involve uninstalling, then using some kinda registry cleaner to erase any trace of autocad on the laptop, then reinstalling - this is a bit severe, and will require the co-operation of my own IT dept, which can be like pulling teeth. I'm wondering if there's any other, less time consuming solution to this irritating problem?
ACad, MEP, 3DS Max
Windows 7x64
X5482 @3.2Ghz 8Gb Ram
Quadro FX1700
Can I load a specific camera/lens profile into LR and if so how?
View 1 Replies View RelatedWhat is the best way to get consistent color from one monitor to another. Is that even possible?
View 6 Replies View RelatedWhy can't I drop a clip in the Program Monitor from the Source Monitor in Premiere? When I try to move a clip from the Source to the Program Monitor, a hand displays with the "circle with a line through it" symbol.
View 2 Replies View RelatedHow can separate Multicam Monitor from Program Monitor? I would like to put Multicam monitor on one monitor and hte Program on another.
View 2 Replies View RelatedI HAVE THE SAME PROBLEM, BUT THE FIX IS NOT WORKING IN AUTOCAD 2012
View 2 Replies View RelatedI've been trying to reproduce this color blind conditionfor a long time now and I still didn't figure out how I can do this. I've searched for cluts but didn't find any, only this, which has some previews of them, but no any files I can load into Photoshop's Color Lookup adjustment. I've looked into Pixel Bender plugin, but I'm using CC so that doesn't work either... I've also tried it with the Index Color mode, but that really messes up my image as it has a really low color range (256). I've even tried reproducing the same effect with adjustments, channels, etc, but didn't figure it out.
Â
Since there's a way to perfectly color proof images with this condition, I'm guessing this has to be some kind of ICC profile or something similar. Is there a way I can use it as a color profile?
How do you add a custom working space profile to the profile list in CS6.
View 1 Replies View Relatedthis file is tagged "c2" -- it doesn't trigger a profile mismatch warning -- why my working RGB is sRGB
View 9 Replies View RelatedFor a monthly magazine on uncoated paper, our workflow is as follows:
- convert every photo to uncoated cmyk (PSO Uncoated) + apply some corrections to look nice in this profile
- apply a fixed correction curve to the photo's
- (resize images + apply proper sharpening for print)
- export pdf: convert colors to destination, preserve numbers
Â
The correction curve step is critical. Without it, everything is printed much too dark.Unfortunately our printer can't provide us with a correct profile for the paper that is used. That's why the correction curve in photoshop is needed.The profile + the correction curve give a good, predictable result.
Â
However i don't like the workflow with the correction curve, because only photoshop links can be corrected.We would also like to put a digital version of the magazine online, so i have to replace all links if i won't to have them displayed correctly.
Â
Can i somehow combine the icc profile with the correction curve into a new icc profile?I did some research and found about "Custom CMYK" in photoshop (see screenshot), but i think an existing profile (PSO Uncoated) can't be edited or replicated in this dialog box.
I have a project that suddenly won't load. I have 25 versions of it, I save it under a new file name each time in case I need to go back to an older version.
Trouble is most of the versions won't load! Only the very early versions will load. Some of the later version start to load then disappear.
Hardware hasn't changed on the PC, maybe the video drivers have been updated, thats about it.
Assign Profile and Convert to Profile does not shows in Edit menu for PS CS3. How do I get those options displayed on the Edit Tab?
View 3 Replies View RelatedI have an alignment label that I normally use to show the PVI's of a profile in the plan view.
This is a little unusual, but in a specific case I wanted to design my profile at one alignment, but show it at another. Â I designed my swale profile in the pathway profile view and then superimposed the swale profile on the swale profile view. Â I then went back to the swale alignment to add these labels.
It's a no-go AFAICT. Â The only profile available for me to select for these labels is the original ground profile from the surface.
I'm working with a structure profile label style and it seems like the only way to anchor the position of the label is based on offsets from the structure itself... Any way to position the label based on the top of the profile view, so that I could make all of my labels horizontally aligned above the profile view?
View 9 Replies View RelatedIm creating a Profile Bandset and would like to have multiple surface/profile elevations shown, ie: EG, FG, Back of Curb and Back of walk. While creating this bandset I see that the text component editor properties only has code for profile 1 elevation and profile 2 elevation in the properties area, which the code for this looks like below.
<[Profile1 Elevation(Uft|P2|RN|Sn|OF|AP)]>
<[Profile2 Elevation(Uft|P3|RN|AP|Sn|OF)]>
Ive tried to write my own code using the profile 2 as an example but it doesnt seem to work as a 3rd surface/profile and only seems to mimic the profile 2 elevation when placed in the band
My questions are as follows
1) does Civil 3d only allow 2 surface elevations in any band set? if it does allow more profiles/surface elevations what am i missing to create it?Â
2) if Civil 3d does alow for multiple surfaces to be shown in the band set how do i get the text component editor to supply the extra profile elevation codes? or would i need to create from scratch
3) if i need to write the code from scratch does any listing of the codes and meanings of each code ie what does RN, Uft, Sn and so forth do and mean .