can you turn that pop-up message "The monitor profile "Samsung - Natural Color Pro 1.0 ICM" appears to be defective. retrun your monitor calibration software" on and off.
I may have checked the "don't show this message again" ? If so...can I re-enable the the profile warning message and how ? Or...does this pop-up only occur if there is a monitor profile issue when Photoshop starts ?
Every single time I power up CS5 I get an error :"The monitor profile "Samsung - Natural Color Pro 1.0 ICM" appears to be defective. Please rerun your monitor calibration software.No other application complain about this.
The monitor is a Samsung SyncMaster 226CW..If I go .. Control Panels Color Management..I can see that there is a profile "Samsung Natural Color Pro 1.0 ICM (default) file SM226CWicm..It is the ONLY profile listed.
I deleted the profile.. I am then prompted to chose a new profile .....from the list shown there is the "Samsung Natural Color Pro 1.0 ICM"..I select that.Then next time I start CS..same error message again.
Just purchased a new monitor for the recording studio...an LG L227WTG FLATRON LCD. Went w/ the glossy screen technology (or whatever LG dubs it) in order to have mo better detail & clarity when working on the graphics side of the equation...Photoshop, Illustrator, etc.
But, speaking of Photoshop...when I open it now...I get a warning message that reads: The Monitor Profile "LG 227W" appears to be defective. Please rerun your monitor calibration software.
What does this mean (aside from the obvious)?
This will be my first high quality graphic experience in PC land; &...since I'm also designing not only my own CD jackets & insert booklets (on the CMYK end)...I'm designing my own web pages (on the RGB end). I need to get this right, so my presentation colors don't look silly.
I have this calibration software Spyder Pro. I calibrate my Monitor once a month, and I have no color problem. Few days ago,I had this Windows Update, Samsung Diplay SyncMasterMagic, which was Optional. I did downloaded, and now when I open Photoshop CC, I get this Message: Adobe Photoshop CC. The monitor Profile problem. I have attached the Error Message
View 2 Replies View RelatedIs there anyway to adjust CS4 and Photoshop so it can work with a 23" Samsung Widescreen monitor so the image does not distort? The user has it set for 1024 x 768 but it can go up to 1680 x1050? I am wondering if there is a setting with CS4 to allow for widescreen monitors.
View 3 Replies View RelatedWe've just upgraded a Samsung 21" monitor to a Samsung 30" (305T).
In just TWO applications, Photoshop CS3 and Windows Photo Gallery (Vista64), all photographic images are much too dark. Not subtly, about 3-4 f-stops too dark.
EVERY other of our applications INCLUDING ADOBE BRIDGE AND FIREWORKS, and even Photoshop itself during Save to Web, displays the photos as they should appear.
I've tried setting various profiles in Windows Color Management as the default, including the ICC profile sRGB IEC61966-2.1 (which my reading says we should be using), as well as WCS profiles sRGB virtual and scRGB virtual, and tried using no profile at all. None of these changes makes any apparent difference at all to the images we're seeing.
In Photoshop, I've tried various options too. If set to Monitor Color (Monitor RGB - * wscRGB) Photoshop then displays images as it should. However the Camera Raw display when loading Nikon images is still much too dark, and the Photoshop Save to Web images are much too light. Arrrgh!
The monitor does not include any driver software, just electronic documentation (poorly edited) which offers no advice about this. I've seen references to various Gamma utilities, but not sure that's what I need. Is it?
How do I calibrate my Samsung monitor and PE 11?
View 1 Replies View RelatedWhen opening photoshop, message: 2460 profile defective, what to do?
View 2 Replies View RelatedThis document has been damaged by a disk error. The most likely causes of this error are: a defective disk drive, a defective disk drive cable, or incorrect peripheral cable termination. Some of the pixels in this document may be invalid.
View 5 Replies View RelatedMay i load a monitor profile in photoshop?for example , i did a test and i calibrated my monitorand i would use the *.icc in photoshop is there a way to keep the monitor uncalibrated but load this profile in photoshop and work in photoshop with a monitor profile
in short it could be a non sense i would love to know only if i can load a calibrate monitor profile in photoshop and if yes , how can i do?
Instead of Photoshop, et al using my Win7 x64 ICC monitor profile, I would like to set it manually, as I'm able to do in other applications. Is this possible?
The reason why is that I have a Dell U3014 and using the software that comes with it, I want to use its sRGB mode (and an associated sRGB profile from my Spyder 4 set as my Windows default) for all of my regular apps, and AdobeRGB mode (and profile) for my CS and other color-aware apps. My other apps DxO, PhotoMechanic, Canon SLR apps, etc. let me choose the profile.
This is an FYI for others trying to solve the problem I've been pulling my hair out over!
I was receiving a warning on startup of Ps CS3 "The monitor profile 'LCD color management and conversion' appears to be defective. Please rerun your monitor calibration software". This was after using my EyeOne to calibrate my monitor. I've seen variations of this problem on various forums and websites, but none helped my particular problem.
FINALLY, it occurred to me to check the default profile for my SECONDARY monitor! That one was using a stock profile that came with the monitor, but that was what was triggering the error message. Once I replaced that with the same profile as I created and was using on my primary monitor, Ps stopped displaying the warning.
If I recall from months ago when I researched and bought my colorimeter, my model will only calibrate one monitor, so I can't use it to create a unique profile for the second monitor.
I have a vintage macBook pro running Snow leopard, PS CS3 & DW CS3. I have a lenovo Business computer-Vista and a Dell-XP with PS 7. My monitor died and I bought a Dell U2412 which I calibrated with i1 Display 2, the grey scale was good & neutral on every 3rd gradation but wandered dramatically in between measured targets, the colour was either good for the skin and dull on the primary and secondary colour targets or over saturated on the skin and too red in the blues and mag (but with correct Sat on primary secondary). This monitor a good colour out of the box in reviews (but not on a mac, Dell profile loaded but no drivers for mac), so I tried it on the lenovo with a greyscale I made on the mac, the Phase One Lowres Colour Checker and a couple of profile targets I got from commercial labs close by (all had primary-secondary swatches greyscales and some natural examples). The greyscale was good very neutral (black grey meld together) and the skin colour and primaries were fine, this is viewing them in paint and windows photo gallery. Double checked them with the Dell, inside and out side PS they looked great using the Dell supplied profile and terrible with a custom profile by i1 Display 2!
I up graded to the i1 Display pro, on the mac the greyscale was very good all round, far better, the skin was good as were all targets but the blue (255 blue in PS is normally very deep 74% tone in the info pallet and very intense) is rendered, appears that is as a med cobalt blue with a visual tone of I would say no more that 50% and while a bright blue far from intense. The magenta is the same a soft pure pink. They measure as they should though 255 blue and 255 red and 255 blue for the mag. I installed and profiled the lenovo with exactly the same settings and it looked great all over! So a Mac PC issue? probably not the Dell exhibits the same behavior when using the i1 Display 2 profile and the Dell U2412 profile. I made a double swatch (blue and magenta) in PS to e-mail to myself so I can monitor the problem a little easier using all 3 computers, as I attached it to the e-mail and I see it looks great in mail, very strange. I loaded the image on a webpage and in DW and put it on my site, all browsers display it as PS does soft. IE on the lenovo displays it as it should. On the mac Preview also displays it correctly.
Recap:
The U2412 is capable of displaying the colours.
The custom profile is loaded as the system profile on the mac and the PC.
The mac displays the 2 colours correctly in Mail and Preview.
The mac does not display the colours correctly in PS DW or web browsers.
The profile is being used by PS; The greyscale is perfect, opening the display preferences window and changing profiles shows a difference.
The profiles are loaded but are changed or corrupted in certain applications.
I cannot be the only one to bring a macBook pro, Snow leopard PS and i1 Display Pro together, am I the only one with a problem?
Although the following is usually discussed in conjunction with Multiple Monitors, I believe it may be relevant in some single monitor environments as well.As far as I can see, PS CS4 uses the Windows XP Default monitor profile (Display Properties > Settings > Advanced > Color Management) as its Monitor Profile (just to be complete here, in the absence of any entries under Color Management, PS uses the sRGB space as the Monitor Profile). I have not been able to find any other way to control which monitor profile PS will use.Hardware monitor calibration tools, as well as the Wincolor applet, make it possible to load the LUT on the fly, but neither my Spyder3 Elite software nor Wincolor actually update the Windows Default monitor profile definition. This means that without manually making the change in the Windows Color Management section, there is no way to tell PS to use a particular monitor profile, thus making it impossible to create a correct relationship between the LUT contents and the PS monitor profile.Making the manual change to Windows is not only tedious, but also makes it essential to REMEMBER to do this every time there is a to be profile switch, which may be necessary due to using one's laptop with different external monitors in different locations, or even just different profiles to compensate for varying ambient light conditions (e.g. one profile for natural daylight, another for artificial lighting at night).Contrary to several comments I've encountered in various posts, I am not able to assign a different Default profile to each monitor at the WIndows level. Perhaps this is possible with some video cards/software, but not with my Nvidia GeForce 8400M G and the latest software.
View 8 Replies View Relateduse a Mac for PS, but I have Adobe Gamma installed as Control Panel on my Windows XP machine, so I can correct the monitor balance.
After I run the Wizard, I save a new sRGB Color Space Profile.icm in WindowsSystem32spooldriverscolor.
But every time I restart Windows, it resets itself, and my monitor balance is off - much too light.
How do you get Windows XP to load this profile each time?
I have recently purchased LG IPS225V Flat Screen monitor and installed CS5 trial version. But as I try to run it I get an error message that the "LG IPS225V monitor color profile is corrupted, run the calibration wizard" and then there are two buttons labelled: "Ignore Profile" or "Use Anyway". This is a new monitor and it is considered to be providing the best factory calibrated color.
I have other free editing programs like Picasa 3, Pain.net etc.
In X3 you could open "Color Management" window, click on the screen icon and load the color profile of your monitor, but in X5 this window has changed and there is now option for the monitor color profile so I can't find how I could import it.
View 10 Replies View RelatedWhenever I open a photo with my Adobe Photoshop Elements 9, I get the following message:
The monitor profile “LCD color management and conversion” appears to be defective. Please rerun your monitor calibration software.”
Following the message are 2 buttons: “Ignore Profile” and “Use Anyway.”
What do I need to do?
i just got a new windows 8 tablet and thought I would try photoshop to see how the pen works vs. my wacom.
i cannot get any pressure control in cs6.
I checked with samsung and the driver is up to date and the pen works in one note and ms photo but not cs6
samsumg claims to be using a wacom driver in their sPen but they supply the driver. The pen is essentially the wacom pen and my intuios pen works on the tablet the same as the samsumg.
Why cs6 won't recognize the pressure?
I want to upgrade my computer and I want to know if I should go for a SSD 256 Gb vs 1 Tb HDD as a scratch disk. I already have 16 Gb of RAM.
View 24 Replies View RelatedI downloaded pictures from a Samsung camera, and now I can't retrieve pictures, because a message keep popping-up stating that the registration for Photoshop expired, how can I retrieve my photos.
View 4 Replies View RelatedWhat is the best way to get consistent color from one monitor to another. Is that even possible?
View 6 Replies View RelatedI want to edit a photo from my Gallery on my Samsung Galaxy Note 10.1, but all I get when I click on Local Images is a few pre-loaded photos that presumably came with the app. I don't know how or where to update PS either, I only bought this tablet a week ago.
View 2 Replies View RelatedI am running Photoshop Elements 11 on my PC using Windows 7. How do I transfer photos in Albums or with Tags to my Samsung Galaxy 10.1 Tablet?
View 1 Replies View RelatedIf you draw a rectangle & put the corner radius to 0.005 and see in zoom edges is not round and have some defective edge.
View 18 Replies View RelatedWhy can't I drop a clip in the Program Monitor from the Source Monitor in Premiere? When I try to move a clip from the Source to the Program Monitor, a hand displays with the "circle with a line through it" symbol.
View 2 Replies View RelatedI can't get Lightroom3.4.1 to read Samsung's raw files. in sRGB or adobeRGB. This is the new NX 200. But since it is supposed to support NX100, one would think NX 200 should be the same format. The samsung converter makes for a clumsy workflow.
View 7 Replies View RelatedHow can separate Multicam Monitor from Program Monitor? I would like to put Multicam monitor on one monitor and hte Program on another.
View 2 Replies View RelatedI'm a long time user of Videostudio Pro all the way back to Media Studio Pro 6. I recently purchased VideoStudio Pro X3. I am working with HD video from a Samsung HMX-H200. The MP4 files were moved to my computer directly from the SDHC card. The format of the files is 1080i. I believe the camera records at 60 fps, but in VSP it is reported as 29.97.
The problem is as follows... I can load a clip on the timeline and play it in project mode, but if I try to play it in clip mode, the preview window goes black and stays this way until I press the stop button. Even stranger is I can scrub through the clip just fine in clip mode.
I have tried both SP2 patches. I have applied the latest Direct X updates. I have re-installed VSP. I tried this with Smart Proxy on and off. I've tried several other system wide optimizations like like cleaning the registry. No luck.
I've several hundred video clips from my Samsung R10 HD camcorder ( H264 - 1080 25 fps) that I wish to link into one continuous file. I'm not bothered about transisitons or any other editing.
Ideally, I would prefer it to be lossless, but when the clips are placed into X3, it appears they have to be rendered. However, if I'm forced to re render, I cant find a 1080 H264 setting in MP4 format with 25 fps?
I've been trying to reproduce this color blind conditionfor a long time now and I still didn't figure out how I can do this. I've searched for cluts but didn't find any, only this, which has some previews of them, but no any files I can load into Photoshop's Color Lookup adjustment. I've looked into Pixel Bender plugin, but I'm using CC so that doesn't work either... I've also tried it with the Index Color mode, but that really messes up my image as it has a really low color range (256). I've even tried reproducing the same effect with adjustments, channels, etc, but didn't figure it out.
Since there's a way to perfectly color proof images with this condition, I'm guessing this has to be some kind of ICC profile or something similar. Is there a way I can use it as a color profile?