i had a solid blue background to which i applied some effect--pretty sure it was from the filter gallery. just one effect. and i liked it very much but didnt think to make a note of it, so sure was i that i'd find it easily again. well now i can't figure out which one i used and i'm hoping one of you pros will recognize this pattern.
View 2 RepliesI get a pic from one website, nicely done. how can do similar this.reference image is attached
View 3 Replies View RelatedI don't know how do an effect of a slash like the one in this game
screenshot
This is for a 2d fighting game so it seems rather difficult for me to make something like this.
i have line in the drawing that exists on layer A-Wall it has different lineweight 0.05 from true wall. Now usually my routine : i select this line and then select similar to convert it to layer glazing.
i need lisp that by one command convert the objects on layer A-wall with layer 0.05 only to glazing.
How I might create the effect of a diamond sparkling which I can use to overlay a video clip.
I want to add an effect to a face as if one of the person's teeth sparkles. I can remember in the movie The Great Race where this effect was added to a smile by the actor Tony Curtis. This is the effect I am trying to produce. I have looked at all the video filters but there are none which will produce this effect and it any case I think that I will have to do it using an overlay track rather than a video filter as I would want to position the actual sparkle according to where the 'tooth' is on screen.
Any good special effect software that runs well with VS Pro x4?
View 4 Replies View RelatedI am trying to put a special 3D effect on a font. I don't know how describe it, thus here is a link where you can see it: [URL] .....
I already know that the font is Agency FB. I don't care about the camouflage look or about the shadow. I'm just interested in the 3D effect. How can I get this effect with Illustrator CS5?
Elements 10 is unable to recognize RAW files from my Powershot G15 but is fine with EOS 600D. Camera RAW has been updated but no difference.
View 4 Replies View RelatedI just installed Corel 13 to my new computer, but it isn't recognizing the text in any of the files from my previous computer. Granted, the files on my previous computer were in an older version of Corel, but that shouldn't be an issue. I can add text to a new document, but even when importing a pdf, the text in the file disappears.
If you drag to select the area where the text should be, it recognizes that something is there. However, you can't see anything or do anything with it. I ran the repair on the installation CD, but I am still having the same problem.
I've been trying to figure this out for over a week since I got my D800 and am not making any progress. I am using LightRoom 4.1 and Adobe Camera Raw 7.1 on a Mac OS X v10.6.8.
I read that I need ACR 6.7 in order to recognize the D800 NEF files, but I don't know how to remove 7.1. I tried deleting ACR from my .library folder and reinstalling 6.7 but it still says it's 7.1 when I open up LR4.1 again. Also, I only have Photoshop CS5 and I read that 7.1 supports the D800 NEF files in CS6 only.
On a probably unrelated note, I bought the educational version of LR4 and when I go back to my email that contained the download link, it shows a blank page on "My Orders" even though I've purchased this and other educational versions from Adobe in the last few years. I got the LR4.1 download file and reinstalled after removing the release candidate I was checking out, but wasn't prompted for my registration code that was in my purchase email.
I am looking to produce a print job in Five colours, CMYK plus a pantone colour. Is there a way to get Photoshop to generate or support a 5 colour file. an extra channel isn't regonized as an extra colour by quark express. At the moment the current answer is two tiffs over the top of each other with the upper set to over print, but this is a little clumsy!
View 5 Replies View RelatedI would like to put a huge flag on a picture like they do on the TV when the rugby/racing is on and make it look very realistic.
View 9 Replies View Relatedi have this border i made, a line weach consists from a number of colors, when i want to place it around a straight line shape i have no problem and all i need to do is to copy and paste and "free trasform" it acording to the angle of the shape. the problem is with a round shape, is there a way to control this line and make it round?
View 9 Replies View RelatedI was finding some of new font but I went to a lot of website also can't find that I prefer.
Anyone got website that download font?
OK I've been a experienced photoshop user and I've been hit by a car. I have CS6. I am trying to remember how to special effects for Icons like beveling.
View 4 Replies View Relatedthis project that im working on. Im trying to create a high speed effect, like your travelling through space or racing on a race track. you have those streaks in the design to give the illusion of travelling at high speed.
Im looking to use some football players on the design so what i should use for a background. The design will be quite small and im looking to create the design as an animated gif when its done.
How do you insert the accented "a" and the accented "i" in Photoshop CS4? I've searched on the web and found reference to special character codes. Where do you find a list of these Alt-code combinations listed?
View 4 Replies View Relatedto create lightning/electricity effect on text that curves/bends to the shape of the text?
I would like the random/jagged effect like render clouds produces.
I have experimented with render clouds filter until I was blue in the face.
I know you can use a black paint brush to add lightning to what the render clouds filter produced.
Mine always look too orderly.
I figure this can be done since using a radial gradient produces a circle of electricity.
Just can't figure out how to relate this to text.
Also is there a way to create branches without using brushes?
how to create a special effects brush?
how d I insert special charecters "like copyright" into a photoshop 6.
Or for that fact a place to find the list of PC Photoshop keyboard shortcuts. Besides the one thats missing from my book.
any software to convert normal font to some special fonts ? just as the attached file.
View 4 Replies View RelatedI've been wanting to upgrade to CS6 but have one issue that is preventing me from using it exclusively during testing that did not occur in CS5.
When typing special characters the formatting jumps all over the place and the speical characters end up at the end of text and not where I typed them.
For instance, if I type ALT+0169 (The copyright symbol ©) then my name, the © ends up at the end of my name. I have to reopen CS5 to do any speical characters using the ALT key + number combinatiion.
To try it, just type [Space][Space][ALT+0169] then any text. If your system is doing what mine does, the text jumps around and puts the © at the end of the text not the start.
I've tried to copy and put the character at the end of the text but to no avail. It seems CS6 only allows the character at the end of the text line.
It's the only thing keeping me from upgrading to CS6 which otherwise I really like.
I'm experiencing a very bizarre problem in CS with a font special character. I used Extensis Suitcase to examine all the font characters for a particular font that I'm using on a project. The character mapping shows the key combination for the character I want is (on a Mac) Option/Alt + Z.
This works in every other application on my computer, including my email application, but for some reason, within CS it brings up the Omega character. Any idea why this happens and how I change it? I even tried to type the character in Word and cut and paste it into Photoshop and it changes! What gives?
i'm intending to make a photo calender. i've selected 12 best photos for the job, but what i lack now is uniqueness. other than the predominant filters that i can apply in CS3, playing with black/white/sepia colours, what other things can i do to make the images look more stunning/refreshed? maybe you guys can introduce some workflow techniques to me, or perhaps some nice add-ons that i can use to make this wonderful workpiece.
View 9 Replies View RelatedFor an art class at my high school, I want to create a series of photomanipulated images that I would title "Be Extraordinary." Basically, I want every picture to be a picture of me doing some sort of extraordinary thing, leaning more towards sci-fi stuff.
I already have an idea for one of me wielding a lightsaber, but after that, I've run out of ideas for anything I know how to do in Photoshop. I had an idea for me creating some sort of energy shield, but I simply don't know how to really create that effect in Photoshop.
When I try to save an image and select the picture format like tiff or jpeg ps always saves the picture in the wrong format. for example I choose jpeg and in the save window the picture has the wrong format (ending). It is saved in the format which is shown in front of jpeg which is .iff? I have already deleted the preferences but the bug stays the same.
View 3 Replies View RelatedAssume PS CS6. I cannot find an easy way. I have tried Character Panel, select the superscript and type letter o for degree symbol. But how to get it directly?
View 7 Replies View RelatedI would like to know how to insert a special character like a big dot or arrow at the beginning of a phrase
View 5 Replies View Relatedhow to create a custom brush shape. Is there a way to create a custom effects using your own shape but creating an effect similar to the one you get with the butterfly or flower brush, like this?
View 2 Replies View RelatedHow to accomplish a special corner treatment. I'm working with very large panoramic files, that frequently have portions of roof top or other obstruction in the corners. I'm looking to try an effect that is a page curl, but more exaggerated than the typical "Warp/Shadow" effect I've used. I would like the curl to be a cone shaped spiral. I am working with VERY high resolution files (very large), so I should have a lot of detail to use in the edge of the curl.
View 8 Replies View RelatedWindows 7; Photoshop 13 (CS6).I am typing some text in a new layer; no problem so far. I need to insert some special characters that are not on the keyboard, e.g.TōkaiThat also was not a problem; I copied the character from the Windows Character Map.
Now I want to copy/paste more special characters from the Character Map, e.g.
☏ (U+260F) or
✉ (U+2709)
Now all of a sudden this does not work; the pasted characters appear in Photoshop as a boxed X.The font I have been using was Arial, but when I pasted these Unicode characters, the font automatically changed to Myriad Pro. Changing the font back to Arial does not alter the boxed X.
I took these Unicode characters from the Character Map using font Arial Unicode MS. That font does not appear in Photoshop.Questions:are there any Unicode fonts available in Photoshop?is there any other way to paste such characters into Photoshop?