Every Time I reopen a CS6 Photoshop file the text areas switch places, switch layers. I cannot use Photoshop CS6 for Mock ups with text.
I tried opening the file in CS5 and the type is still switching places!
(Again) Switching the “data type” of the cell,I’m not sure why the AutoCAD doesn't allow changing the “data type” of the cell in the table for already existing data. For example, in the attached table, I wanted to switch the “data type” from “decimal number” to “percentages”, but sounds that the AutoCAD doesn’t allow this function.
In the Excel, for example, we can switch the “data type” easily by selecting the target cells and choosing the format we need! Quite simple, in the AutoCAD, it seems that it needs some work around!
Architecture 2009 running on Windows 7. Dell Precision T5400 with a Quadro FX570 graphics card.
I have lately been having some issues with text in Architecture 2009. I first noticed that within Mtext, when you hit the "UPPERCASE" or "lowercase" buttons, the text disappears in the editor, and no changes are made. Not the end of the world, but not handy.
Then it stopped letting me type in Mtext boxes at all. The return key seemed to work, but nothing else. Then it started converting text typed into Mtext boxes into (I think) Chinese characters. Really not handy. At this point I decided to try to reinstall. First I tried a repair, then reinstalled over the existing installation, then uninstalled completely and reinstalled from the disk. I've also done a windows restore, though as this has slowly been falling apart, I'm not sure when I should restore back to.
I have Mtext basic functionality back, but the "UPPERCASE" and "lowercase" buttons still make the text disappear.
Not sure if it's related, but I also get a Fatal Error e06d7363h at 758bd36fh about 4 or 5 times a day. Usually it's associated with the open command (ctrl+o), but sometimes it just happens at random.
Can add selection boxes or pick boxes to a block?
Here's the situation. I have a block that will be inserted showing a piece of angle iron that is used for a stiffener. We have various sizes that will need to be used. Instead of typing in the angle size each time it's inserted can I have a list of all the angle sizes and then a pick box or radial dial or something to be selected and that is what is put in the block?
I have a PSD full of pre-styled mark-up layers I routinely need inside of my working PSD so I can use the layers for the same repetitious thing.
How does one create an action that not only opens the mark-up layers PSD, but also places it's contents in an open PSD, positioned down in the bottom-right corner of the open target PSD?
The action won't know what the dimensions of the target PSD they are. The working PSD's I need the mark-up layers in is random.
I can do it where an action places another PSD's contents in a target PSD in one click, but all the layers are embedded as a Smart Object. I don't believe there's a way to "un-embed" the layers in a Smart Object.
Photoshop Elements wants to use Google Maps to identify 'Places', and allocating place names in the Organiser. Some of the names are not what I want, and in an English Edition are even coming out in arabic script. How do I rename the place names or, even better enter them manually?
View 6 Replies View RelatedIt's great (and mandatory) that map.tagging is back in PSE11. New places-tags are indicated with a small icon in the thumbnail.view, but not GPS-tagged and manually tagged pictures from PSE9 and earlier. It is very hard to see which pictures are already tagged when this does not work !
View 7 Replies View RelatedI recently upgraded to CS4 from CS2.
When I'm drawing with the Pencil tool at high magnification (1000% or more, doing icon work), the actual pixel changed is not the pixel I click on half of the time. In fact, it often is up to 20 pixels away, so it's not just some snapping problem. Half of the time, it doesn't even change any pixel in my icon (presumably, trying to change a pixel outside the smallish image).
Do I call support to get this logged and have to wait for a fix? Or is there some work-around?
after making my first steps in the world of RAW-photography with lightroom, I wanted to add the ability to edit digital photos. After comparing my options, I decided to choose Elements 12.
As I already had some keyword-tags in Lightroom, I imported them to Elements - so far, so good. But what I did not find so far was the possibility to "import" my GPS-tagged metadata into the places-tags. Seemingly I have to retag them again, which is annoying, but would be a reasonable way for existing photos. When going on a photo trip, I currently use a GPX-tracklog to easily add the necessary GPS-information via lightroom. Is there any way to do so in Elements 12? I wonder what is your workflow when adding GPS data to your photos?
Have successfully imported ‘Places’ sub-categories and tags structure to PS12 from an earlier version but cannot now add to them. How do I insert new sub-categories and tags under ‘Places’? There is no geographic data for existing tags and I am not interested in adding it. Wish to continue as before (there are a lot of tags).
View 1 Replies View RelatedCan tltles and names be added on pictures in elements 11?
View 1 Replies View RelatedHow to add folder under recent places to save images?
View 2 Replies View RelatedI wanted to order pictures from shutterfly but once I placed my order and then the photos were uploaded, I can't go back and create other items from shutterfly to order at the same time. So, shutterfly told me to save my Adobe pictures to my computer and then upload from there. But I can't seem to do that, just save to Adobe.
View 2 Replies View RelatedI would like to be able to tag a photo (ie: many photos at one time) with a KEYWORD tag for a place and then be able to find those photos on the map under the PLACES tab.
View 4 Replies View RelatedThe font size shown should be double the actual display 36pt, but it's showing as 18pt. Do you know why it's happening?
View 9 Replies View RelatedOld PC Windows XP with PSE8. New PC Windows 8 with PSE11.I did a backup and restore operation. After the restore, there was a large list of files that could not be restored. I also noticed that there were a large number of thumbnails with a question mark attached.
I did a reconnect using FindAll missing files. Instead of placing the recovered files in their original path and folder location, they ended up in an entirely different path in the Folders View. I tried to drag the folders back to their original location, but got the message: folder with that name already exists at the requested location, even though it wasn't visible. In addition some of the folders involved were no longer visible in either path structure.
I checked in the My Folders View, and it showed that the folders involved in the reconnect were still intact. I opened one or two and found they contained the original missing images.How can I get the folders and their images back to their correct places in the original path structure?
how can i include a sampling of type in ps7 type tool? i did this in ps3
View 3 Replies View RelatedI´ve been building an airplane. After sculpting in rivets and some detail onto the wing i wanted to retopologize to get a lowpoly. But the new surface doesn´t always stick to the original object, when i try to let it go around the whole object it connects the vertices through the wing instead of sticking to the surface. This usually happens when i start at the top of the object-i place loops around it and when i try to close them at the bottom it "steals" the working surface on the top and pulls it down.
View 1 Replies View RelatedI have 15 tabs and I want to move one down 2 places. I see how to move it to the end, but that does me no good.
View 7 Replies View RelatedI am running AutoCAD Map 3D 2011. When i use the ID command to acquire x,y coordinates by snapping to an object, it gives me only one decimal place. When i do the command out in space, it gives me 4 decimal spaces. I need to get at least two decimal places while snapping to objects. Examples below:
id command (out in space, not using osnap)
X = 4006431.3366 Y = 359556.5635
id command (snapping to entity)
X = 4006252.3000 Y = 360712.5000
by the way, my units precision is set to .00 and it doesnt seem to make any difference with the id command.
I want to do a simple bend of a cylinder. That is, I have made a 40inch length and want to bend it at several places.
I keep finding a reference to bend part but the tool does not exist in Inventor.
I need to have one assembly constrained to three places on along a bar. Should I ( and how would I?) open another assembly drawing, insert said bar and some how insert those three assemblies into the drawing?
View 7 Replies View RelatedI have used stringer connect in the past and it seemed that my traverse shots (which went to four decimal places 0.0000) that were in my raw file were converted to a fbk file and it held the decimal places. Now when I use it, the program rounds my shots to three decimal places (0.000) which changes the locations just slightly. I don't think I changed any settings deliberately. How can I get my four decimal places back?
View 3 Replies View RelatedMy professor wants all of our dimensions to have 2 decimals places except for a few that he wants to have 3 decimal places. How do I change those few to have 3 places while everything else has 2?
View 1 Replies View RelatedI'm wondering if it's possible to change the decimal place accuracy to default to only rounded numbers i.e. 1mm instead of 1.325. I want EVERYTHING to snap to the nearest mm (Axis, Dimensions etc.) rather than 1.233 for example.
Yes, I can manually type into the dims / axis boxes everytime but thats a chore.
I have been using illustrator since 1988 and I am not sure why all of a sudden this is happening. I must have clicked the wrong box or something. I save a jpg from my psd file at 5 x 6 inches at 300 dpi. I place it into my letter sized page in illustrator CS5 and it comes out huge. I look at the bar at the top at it says its 72ppi.
Just earlier today, it place fine and viewed like a 300 dpi file. What did I mess up to make this happen all of a sudden.Why is it placing at 72 ppi?
I checked InDesign and it places fine.
I place the psd file and it places fine.
But the jpg places huge at screen resolution.
I understand the difference between print vs screen resolution.
I imported my iPhoto Library in Lightroom 4 but unfortunately my attached places (GPS data) are not visible in Lightroom 4.My other geatagged photo's are.
View 1 Replies View Relatedis there any way of making one object appear in multiple places?
The problem is that we are designing some objects (call them "buttons") whose design we have not finalized how they will look yet.
i.e. The shape, size, layout of components of these buttons is still undecided, although we know that they will be in use in a large number of places (on a large number of pages).
So what I want is to have a single master copy of the object that I can edit in one place, and for those changes to ripple out across multiple places on multiple pages.
P.S. I thought Edit ==> Clone Shape would do this, but it appears to create separate, un-linked copies. In fact all it seems to do is in effect the same as Control/C and then Control/Shift/V!
I'm making a short oval race track. I'm lofting along an oval shaped path and can get the track width consistant all the way round - but my issue is that I want the bends to have more width than the straights.
i've seen examples of lofts having more than 1 shape along them (tubes turning into cubes at certain points etc), but I just lofted my path to a line as the track only needs to be a flat 2 dimensional surface.The scale deformations allows for some change of width, but doesn't seem to have much accuracy.
The black line is the path, grey area is the loft produced, blue area is an example of how I want the track area to be.I'm using 3dsmax v5.
If you create a leader in autocad it automatically places the text as shown i figure 1. I would like to create one that places it like in figure 2. How do you do this the smartest way?
mleader.png
I am redesigning my kitchen and I would like to draw the units I have and save them individually in autocad 2011.
I then want to load each kitchen unit and move it into different places to get the best fit.
I knew somebody years ago that did this for a living designing rooms with display cabinets and furniture and he drew the furniture and saved them for later uses and then just loaded them into the room he was designing, but I can't remember what he saved them as?? I know he saved things with the names such as Chair, desk, table ETC but I have been looking in my Autocad Bible, but not knowing the name has stumped me for what I need to look for all I can think of is TEMPLATE but this is not what I am after? or is it ?
I have drawn my kitchen and I want to draw my units as 600mm cupboard, 500mm draw unit, 1000mm double cupboard and so on, then just bring them into my drawing, move them, rotate them, delete them if its not looking right ETC.