Photoshop :: Trouble Making Parts Of Image...
Jun 7, 2008
I have an image which is currently surrounded by a white background that I want to get rid of.
So far I have selected all of the background and hit delete, which appears to have deleted all of the white background as it shows up transparent.
However when I save the image as a TIFF an then open it up in Illustrator, the image still contains the white background.
View 2 Replies
ADVERTISEMENT
Jul 30, 2005
I'm in the process of prepping individual components of a design for Flash animation. I'm trying to apply a layer of #7C6844 with the color effect at 56% opacity and a layer of #999999 with the color burn effect at 12% opacity to the foreground image which has a transparent background. This task has proved to be rather impossible for me, but it seems like there should be a way to do it. I would use the wand tool > select inverse and apply the colors over top that way, but the foreground image has a lot of leaves and branches, so that method would be extremely tedious.
Is there a way I can select the entire image as a whole and leave out the background?
I'll attach the image and the desired result to further assist.
View 1 Replies
View Related
Mar 25, 2013
I need to make two parts act solid. That is, that they need to slide and react as if they were real instead of just going through eachother. In the assembly included, the "rotator" needs to rotate as it is pulled through the "rifled column (2)". The other constraints in the assembly are fine as is, but if I can make these parts react correctly, then the center pole and blade will rotate.
View 3 Replies
View Related
Nov 8, 2011
I'm assembling parts and one of the parts is in my Inventor Library. When I try to make a plane visible it won't let me. I can constrain to the plane , I just can't make it visible.
Inventor 2011
Autodesk Inventor 2011
AutoCAD Mechanical 2011
View 4 Replies
View Related
Feb 12, 2013
I have drawn a cylinder, with inside diameter 1028mm, wall thickness 5mm. We usually have calculated unfolded part length like this: outside dim. 1038mm - 5mm (wall thickness) = 1032 x 3,14 = 3240mm. Now when i unfold in inventor I get for the length 3215,35mm. It is quite far from the result we usually would have received.
Unfolded part will be rolled to cylinder. What parameters should be overlooked when making unfolded parts for plate rolling?
View 9 Replies
View Related
Feb 28, 2013
It is all about making a spiral shaped pattern of parts around an axle.
what I found in a topic is:
1.Make pattern of workpoints in part file.
2.Make pattern of components in assembly file to follow part pattern.
1st part is easy and done with coil and pattern within the ipt
2nd part does not let me select the workpoints as feature pattern.
View 7 Replies
View Related
Oct 13, 2008
Using CS3. Computer is fine and everything was working up until a few minutes ago. Now everytime I try to save as the dialog box disappears and the program menu bar grays out.
View 1 Replies
View Related
Jun 8, 2006
I have a box I made with the square selection tool. I added a 25 px feather to it to give it nice rounded corners.
I did a paint bucket fill inside the selection and it doesn't fill JUST the insides like I thought it'd do. It does MOST of it but it blends outwards towards the sides of the selection so it's not one solid color.
ALSO when I flood fill a few times, it EXTENDS passed my selection box into the rest of the window!
My question is, how do I make a selection box with rounded corners flood fill COMPLETELY?
View 5 Replies
View Related
May 26, 2005
I've created a webpage in phtoshop, done my rollovers in image ready and transferred it into dreamweaver.
Now when it's on my hard drive it's fine and works - but when i upload it none on the images show up or they do show but when you put your cursor over a rollover all the images diassapear (they all turn to red crosses).
View 3 Replies
View Related
Aug 26, 2004
I've made animated .gifs before without this problem: I have taken 12 seperate .gif images, converted them to RGB mode, dropped them all into the same Photoshop file, and then jumped to Imageready to create frames for each layer. Upon clicking "Save Optimized As", I get the following warning:
"Because JPG, PNG, and WBMP do not support animation, Imageready will save only the current frame."
I don't understand what I've missed. All 12 original images were .gif. I had to convert them to RGB mode in order to create a 12 layer file, but don't think that is what is causing this issue.
Any ideas?
View 3 Replies
View Related
Jan 30, 2005
Recently I got a new computer and I had to reinstall Photoshop 7. Before reinstalling it, my font came out smooth and such.
View 3 Replies
View Related
Jan 15, 2008
I am a beginner with using photoshop. When trying to use Filter>Render>Clouds it is faded and I cant use it. I have tried looking with google, but I did everything but it was still faded.
View 3 Replies
View Related
May 12, 2009
A while back I took a Photoshop class and remember a lesson on where you could select a region of an image and save it for the web with a high quality and select another region of the same image and save it for the web with a low quality, so that the focal point was saved with a high quality and the background was saved with a low quality. I have no idea where my notes are from this class and can not remember at all how to do this. Can anyone direct me to a tutorial about this?
View 2 Replies
View Related
Jun 20, 2013
In Elements 3 I could clone parts of one open image to another image. How do I do this in Elements 11?
View 2 Replies
View Related
Jan 20, 2005
When adding a gradient to a canvas that has a selection why do I see an outline around my selection when the gradient is applied? What can I do to eliminate that outline.
View 6 Replies
View Related
Feb 14, 2009
im designing a tshirt for a client and i am drawing something in black using the paintbrush tool. i messed up because i forgot it needs to be dark brown. to use paint bucket makes the images lines distorted and "fat". is there no way to just take the black i drew by itself in its layer and turn it all another color without messing it up?
View 2 Replies
View Related
Apr 11, 2006
I'm trying to create an action with an F shortcut, so when I save a file that I've edited, it saves it with an '_ed' after it.
When I've done the action, it just changes the whole file name, instead of adding the '_ed'. I know there is a batch option for this, but I was wondering how I could go about doing this on a file by file basis.
View 3 Replies
View Related
Jan 4, 2008
I just bought a new laptop computer....I had Adobe Photoshop CS2 installed on my desktop computer...have not used it much at all. So, just yesterday I did the "Transfer Activation "thing". I did as instructed...Installed it on my laptop...(this new laptop is an HP Pavilion with 2GB, Intel Centrino, Light Scribe, and Windows Vista).
When I was through installing it (it said I installed successfully)....then I was told to register it... ...I did so...using my new address (of the laptop)...It told me It registered successfully.
I then proceeded to download updates....when all was said and done, and rebooted...said the updates were installed successfully as were the registration, and updates.
View 2 Replies
View Related
Aug 15, 2009
I'm creating a 3D text logo using CS4 Illustrator and Photoshop. I created the logo in Illustrator, and copied it into Photoshop to apply color using hue and fill settings. I used the wand tool to select the top of the letters, then changed the hue on the sides, then filled the tops with a different color. I created a new layer for the selected tops. I want a transparent background, and I want to save the file as a Gif. However, when I flatten the image, I get a white background. Somehow, a white background sneaked in. Also, when I go to save the file, there is no option for a .gif. I saved it as a jpeg. But then Dreamweaver would not display it. It only showed a samll icon representing the graphic, but wouldn't display it.
1. How can I avoid having my transparent background become white?
2. Why am I not getting the option to save as a .gif?
3. why Dreamweaver wouldn't open the jpeg? Could it be size? File too wide. In the past Dreamweave automatically resizes to accomodate wide files.
View 5 Replies
View Related
May 1, 2013
I am really new to photoshop... i have been trying to make vector art from live images but failed ...make this given live image like the another image which is vector.
View 3 Replies
View Related
Jan 16, 2009
I bought this photoshop magazine, and was trying to follow a tutorial for scanning in an image. (btw i have searched for this, and found nothing). So I scanned it and opened it in illustrator, and did live trace and everything to get the outline, then I exported it as psd (as the tut. said), but when I opened it in photoshop, the white background was gone. It was an outline of my drawing on the gray and white checkerboard background. Now in the tutorial it said to use the magic wand tool to select all the white, and delete it (in illustrator) so I thought maybe that was it, but it wasnt. It still opened like that without deleting the white areas.
View 3 Replies
View Related
Jul 6, 2004
I scanned several magazine covers (believe it or not I'm one of the few who still dosen't own a digi cam) and now want to place each pic/scan side by side or one on top of the other to resemble what a picture would look like if I had taken it with a digi cam.
Any ideas?
View 1 Replies
View Related
Jun 29, 2005
I use the line tool (U) quite a bit and for some reason now after I make my first line the next line i try to make is white/negative amd the line tool has the little minus mark (-) next to it. How do i reset it to the (+)? currently i am having to make a line, rasterize the layer and make the next line.
View 3 Replies
View Related
Feb 7, 2006
I was currently working on a project in photoshop, and i had a text layer I saved it as a psd to make any later changes, and now when i want to change the "text" layer it does not change, What i mean by change is when i click my type tool to change the spelling of the text the text is not slected instead it makes a new layer.
View 1 Replies
View Related
Apr 12, 2012
If I use 2 monitors to display 1 image with the image extending from one monitor into and across the second monitor, can I make a screen shot of the entire image without any break in the middle where it crosses from one monitor to the other? Will it be one continuous screenshot of the entire image, even though the image is displayed on 2 monitors?
View 6 Replies
View Related
Nov 15, 2004
how can I cut out just a single part of a whole image and not the entire image itself? For example, I have a picture of a girl and the only thing I want to use from the entire picture is her lips. How can I cut those out?
View 7 Replies
View Related
Apr 24, 2013
I have two images. I want to make one image look as though it is coming out of the other. In the middle of the image. I have an image of a forge. and the other is a saxophone. I want to combine the two so that it looks like the sax is be made from the fire in the forge. I just want the bottom of the sax not be shown.
View 1 Replies
View Related
Dec 21, 2004
I received this photo and was asked to try make it look better.
I was never good at making old/bad looking images look better.
I can use the "stamp tool" to clean the dots but what about the rest
of the photo.
View 9 Replies
View Related
Jul 11, 2012
I wasn't sure how large my image would be, so I created a larger than necessary PSD file. I would like to export as little as possible (it's a rectangular image). How can I select just the image for export and ignore the background?
View 1 Replies
View Related
Oct 18, 2013
I am using Photoshop CS6 and I want to create a composite of 2 images. One is of the Moon and the other will be of stars. The problem I'm having is removing the unwanted stars from the Moon and the dark part of the Moon (depending on the Phase). Do I create a layer for each image? And is it black over white or vice-versa?
View 7 Replies
View Related
Sep 16, 2013
i want to take out the buildings on the right and left of the water heaters, leaving the skyscrapers in the middle. i'm quite a novice at Photoshop and i can't seem to find a good way to do it without having a horrible result.... i tried doing it using the clone stamp and spot healing brush, but i just cant seem to get a good transition of the background sky from dark black to lighter grey once i take the buildings out..
View 9 Replies
View Related