im designing a tshirt for a client and i am drawing something in black using the paintbrush tool. i messed up because i forgot it needs to be dark brown. to use paint bucket makes the images lines distorted and "fat". is there no way to just take the black i drew by itself in its layer and turn it all another color without messing it up?
View 2 RepliesI'm in the process of prepping individual components of a design for Flash animation. I'm trying to apply a layer of #7C6844 with the color effect at 56% opacity and a layer of #999999 with the color burn effect at 12% opacity to the foreground image which has a transparent background. This task has proved to be rather impossible for me, but it seems like there should be a way to do it. I would use the wand tool > select inverse and apply the colors over top that way, but the foreground image has a lot of leaves and branches, so that method would be extremely tedious.
Is there a way I can select the entire image as a whole and leave out the background?
I'll attach the image and the desired result to further assist.
Using CS3. Computer is fine and everything was working up until a few minutes ago. Now everytime I try to save as the dialog box disappears and the program menu bar grays out.
View 1 Replies View RelatedI have a box I made with the square selection tool. I added a 25 px feather to it to give it nice rounded corners.
I did a paint bucket fill inside the selection and it doesn't fill JUST the insides like I thought it'd do. It does MOST of it but it blends outwards towards the sides of the selection so it's not one solid color.
ALSO when I flood fill a few times, it EXTENDS passed my selection box into the rest of the window!
My question is, how do I make a selection box with rounded corners flood fill COMPLETELY?
I've created a webpage in phtoshop, done my rollovers in image ready and transferred it into dreamweaver.
Now when it's on my hard drive it's fine and works - but when i upload it none on the images show up or they do show but when you put your cursor over a rollover all the images diassapear (they all turn to red crosses).
I've made animated .gifs before without this problem: I have taken 12 seperate .gif images, converted them to RGB mode, dropped them all into the same Photoshop file, and then jumped to Imageready to create frames for each layer. Upon clicking "Save Optimized As", I get the following warning:
"Because JPG, PNG, and WBMP do not support animation, Imageready will save only the current frame."
I don't understand what I've missed. All 12 original images were .gif. I had to convert them to RGB mode in order to create a 12 layer file, but don't think that is what is causing this issue.
Any ideas?
Recently I got a new computer and I had to reinstall Photoshop 7. Before reinstalling it, my font came out smooth and such.
View 3 Replies View RelatedI am a beginner with using photoshop. When trying to use Filter>Render>Clouds it is faded and I cant use it. I have tried looking with google, but I did everything but it was still faded.
View 3 Replies View RelatedWhen adding a gradient to a canvas that has a selection why do I see an outline around my selection when the gradient is applied? What can I do to eliminate that outline.
View 6 Replies View RelatedI'm trying to create an action with an F shortcut, so when I save a file that I've edited, it saves it with an '_ed' after it.
When I've done the action, it just changes the whole file name, instead of adding the '_ed'. I know there is a batch option for this, but I was wondering how I could go about doing this on a file by file basis.
I just bought a new laptop computer....I had Adobe Photoshop CS2 installed on my desktop computer...have not used it much at all. So, just yesterday I did the "Transfer Activation "thing". I did as instructed...Installed it on my laptop...(this new laptop is an HP Pavilion with 2GB, Intel Centrino, Light Scribe, and Windows Vista).
When I was through installing it (it said I installed successfully)....then I was told to register it... ...I did so...using my new address (of the laptop)...It told me It registered successfully.
I then proceeded to download updates....when all was said and done, and rebooted...said the updates were installed successfully as were the registration, and updates.
I'm creating a 3D text logo using CS4 Illustrator and Photoshop. I created the logo in Illustrator, and copied it into Photoshop to apply color using hue and fill settings. I used the wand tool to select the top of the letters, then changed the hue on the sides, then filled the tops with a different color. I created a new layer for the selected tops. I want a transparent background, and I want to save the file as a Gif. However, when I flatten the image, I get a white background. Somehow, a white background sneaked in. Also, when I go to save the file, there is no option for a .gif. I saved it as a jpeg. But then Dreamweaver would not display it. It only showed a samll icon representing the graphic, but wouldn't display it.
1. How can I avoid having my transparent background become white?
2. Why am I not getting the option to save as a .gif?
3. why Dreamweaver wouldn't open the jpeg? Could it be size? File too wide. In the past Dreamweave automatically resizes to accomodate wide files.
I bought this photoshop magazine, and was trying to follow a tutorial for scanning in an image. (btw i have searched for this, and found nothing). So I scanned it and opened it in illustrator, and did live trace and everything to get the outline, then I exported it as psd (as the tut. said), but when I opened it in photoshop, the white background was gone. It was an outline of my drawing on the gray and white checkerboard background. Now in the tutorial it said to use the magic wand tool to select all the white, and delete it (in illustrator) so I thought maybe that was it, but it wasnt. It still opened like that without deleting the white areas.
View 3 Replies View RelatedI have an image which is currently surrounded by a white background that I want to get rid of.
So far I have selected all of the background and hit delete, which appears to have deleted all of the white background as it shows up transparent.
However when I save the image as a TIFF an then open it up in Illustrator, the image still contains the white background.
I scanned several magazine covers (believe it or not I'm one of the few who still dosen't own a digi cam) and now want to place each pic/scan side by side or one on top of the other to resemble what a picture would look like if I had taken it with a digi cam.
Any ideas?
I use the line tool (U) quite a bit and for some reason now after I make my first line the next line i try to make is white/negative amd the line tool has the little minus mark (-) next to it. How do i reset it to the (+)? currently i am having to make a line, rasterize the layer and make the next line.
View 3 Replies View RelatedI was currently working on a project in photoshop, and i had a text layer I saved it as a psd to make any later changes, and now when i want to change the "text" layer it does not change, What i mean by change is when i click my type tool to change the spelling of the text the text is not slected instead it makes a new layer.
View 1 Replies View RelatedWhen I have any kind of layer, and I want to change the foreign or background color (with the color picker) I just cant. When I click on the foreign or background color it automatically selects the eyedropper tool, and I don't want this to happen.
View 1 Replies View RelatedA while back I saw a video about using the video editing capabilities. In particular the video showed a car with a colored sheet over it and the in the video the sheet was either pulled off the car or the car moved out from under the sheet (I cant remember which). Then the video showed how to use the color replace tool to change the color of the sheet throughout the entire video.
View 2 Replies View RelatedI have a star that I would like in a specific color, but am having issues changing it with the replace color and/or color replacement tool. The image is small, but I am trying to have all the pixels. The color I want to use is Pantone solid uncoated 655 U. This is the image I am trying to change.
View 4 Replies View RelatedWhy won't the color picker change my font color? It has worked for months and today it won't.
View 1 Replies View RelatedIn photoshop elements 11, in a photo collage, in graphic tab, how do i change the background to a color in the color wheel?
Same thing for the graphics, i only have 6 choices, i want to add a graphic stored on my pc or other ones in the program.
In photoshop elements 11, in a photo book, page 2 and 3 are stored as one image, and have to have the same background color, and layout, how do i change that?
I have a solid red image and I want to change that red to an exact red hex code I have. Is there a way to change this color without affecting the quality of the image? I thought this would be really easy, but everything I've found online doesn't give me the color I want, or It doesn't allow me to be 100% accurate.
View 7 Replies View RelatedI have two classic cars and have not decided on color combinations . I want to be able to have a picture of the car and then go into a color chart and be able to insert any color and see it in order to make a decision?
View 1 Replies View RelatedIs there a way in photoshop to take all pixels of a certain color code, and change only those pixels to a different color?
View 2 Replies View RelatedI didn't notice when and why it happened, but now when i draw white line, it appears brown. I didnt change any settings, just did my usual work, when it appears. Other colors are normal. What could it be?
View 6 Replies View Relatedi am looking for a lisp routine which can change all lines in color yellow ( in different layers) to color 8.
View 9 Replies View RelatedIs there a way to change the color of the Vignette to match the page background color. It appears to that only Black is available at this time.
Is there a transparent vignette available anywhere .
I have a question regarding illustrator. Let's say I have a circle with blue fill and red stroke. And I place an image in the illustrator file. Now I want to change the red stroke of my circle to let's say a purple color by sampling the color from the image.
How can I achieve that with a eye dropper tool? Every time when I try to sample a color from the image, the whole circle will change to purple instead of just the stroke? I have tried multiple key combination, shift, alt, ctrl but they all don't work.
I need to change the default text color to a pantone spot color.
View 5 Replies View RelatedQuestion #1.
Were can I change the "color saturation" to use for my "color changer"?
Question #2.
When using "point-to-point" or "edge seeker", is there a way to go back one or two steps, without having to start all over again?