Photoshop :: Trouble Exportig>opening File...
Jan 16, 2009
I bought this photoshop magazine, and was trying to follow a tutorial for scanning in an image. (btw i have searched for this, and found nothing). So I scanned it and opened it in illustrator, and did live trace and everything to get the outline, then I exported it as psd (as the tut. said), but when I opened it in photoshop, the white background was gone. It was an outline of my drawing on the gray and white checkerboard background. Now in the tutorial it said to use the magic wand tool to select all the white, and delete it (in illustrator) so I thought maybe that was it, but it wasnt. It still opened like that without deleting the white areas.
View 3 Replies
ADVERTISEMENT
Feb 7, 2006
I was currently working on a project in photoshop, and i had a text layer I saved it as a psd to make any later changes, and now when i want to change the "text" layer it does not change, What i mean by change is when i click my type tool to change the spelling of the text the text is not slected instead it makes a new layer.
View 1 Replies
View Related
Oct 13, 2008
Using CS3. Computer is fine and everything was working up until a few minutes ago. Now everytime I try to save as the dialog box disappears and the program menu bar grays out.
View 1 Replies
View Related
Jun 8, 2006
I have a box I made with the square selection tool. I added a 25 px feather to it to give it nice rounded corners.
I did a paint bucket fill inside the selection and it doesn't fill JUST the insides like I thought it'd do. It does MOST of it but it blends outwards towards the sides of the selection so it's not one solid color.
ALSO when I flood fill a few times, it EXTENDS passed my selection box into the rest of the window!
My question is, how do I make a selection box with rounded corners flood fill COMPLETELY?
View 5 Replies
View Related
May 26, 2005
I've created a webpage in phtoshop, done my rollovers in image ready and transferred it into dreamweaver.
Now when it's on my hard drive it's fine and works - but when i upload it none on the images show up or they do show but when you put your cursor over a rollover all the images diassapear (they all turn to red crosses).
View 3 Replies
View Related
Aug 26, 2004
I've made animated .gifs before without this problem: I have taken 12 seperate .gif images, converted them to RGB mode, dropped them all into the same Photoshop file, and then jumped to Imageready to create frames for each layer. Upon clicking "Save Optimized As", I get the following warning:
"Because JPG, PNG, and WBMP do not support animation, Imageready will save only the current frame."
I don't understand what I've missed. All 12 original images were .gif. I had to convert them to RGB mode in order to create a 12 layer file, but don't think that is what is causing this issue.
Any ideas?
View 3 Replies
View Related
Jan 30, 2005
Recently I got a new computer and I had to reinstall Photoshop 7. Before reinstalling it, my font came out smooth and such.
View 3 Replies
View Related
Jan 15, 2008
I am a beginner with using photoshop. When trying to use Filter>Render>Clouds it is faded and I cant use it. I have tried looking with google, but I did everything but it was still faded.
View 3 Replies
View Related
Jan 20, 2005
When adding a gradient to a canvas that has a selection why do I see an outline around my selection when the gradient is applied? What can I do to eliminate that outline.
View 6 Replies
View Related
Feb 14, 2009
im designing a tshirt for a client and i am drawing something in black using the paintbrush tool. i messed up because i forgot it needs to be dark brown. to use paint bucket makes the images lines distorted and "fat". is there no way to just take the black i drew by itself in its layer and turn it all another color without messing it up?
View 2 Replies
View Related
Apr 11, 2006
I'm trying to create an action with an F shortcut, so when I save a file that I've edited, it saves it with an '_ed' after it.
When I've done the action, it just changes the whole file name, instead of adding the '_ed'. I know there is a batch option for this, but I was wondering how I could go about doing this on a file by file basis.
View 3 Replies
View Related
Jan 4, 2008
I just bought a new laptop computer....I had Adobe Photoshop CS2 installed on my desktop computer...have not used it much at all. So, just yesterday I did the "Transfer Activation "thing". I did as instructed...Installed it on my laptop...(this new laptop is an HP Pavilion with 2GB, Intel Centrino, Light Scribe, and Windows Vista).
When I was through installing it (it said I installed successfully)....then I was told to register it... ...I did so...using my new address (of the laptop)...It told me It registered successfully.
I then proceeded to download updates....when all was said and done, and rebooted...said the updates were installed successfully as were the registration, and updates.
View 2 Replies
View Related
Aug 15, 2009
I'm creating a 3D text logo using CS4 Illustrator and Photoshop. I created the logo in Illustrator, and copied it into Photoshop to apply color using hue and fill settings. I used the wand tool to select the top of the letters, then changed the hue on the sides, then filled the tops with a different color. I created a new layer for the selected tops. I want a transparent background, and I want to save the file as a Gif. However, when I flatten the image, I get a white background. Somehow, a white background sneaked in. Also, when I go to save the file, there is no option for a .gif. I saved it as a jpeg. But then Dreamweaver would not display it. It only showed a samll icon representing the graphic, but wouldn't display it.
1. How can I avoid having my transparent background become white?
2. Why am I not getting the option to save as a .gif?
3. why Dreamweaver wouldn't open the jpeg? Could it be size? File too wide. In the past Dreamweave automatically resizes to accomodate wide files.
View 5 Replies
View Related
Jun 7, 2008
I have an image which is currently surrounded by a white background that I want to get rid of.
So far I have selected all of the background and hit delete, which appears to have deleted all of the white background as it shows up transparent.
However when I save the image as a TIFF an then open it up in Illustrator, the image still contains the white background.
View 2 Replies
View Related
Jul 6, 2004
I scanned several magazine covers (believe it or not I'm one of the few who still dosen't own a digi cam) and now want to place each pic/scan side by side or one on top of the other to resemble what a picture would look like if I had taken it with a digi cam.
Any ideas?
View 1 Replies
View Related
Jun 29, 2005
I use the line tool (U) quite a bit and for some reason now after I make my first line the next line i try to make is white/negative amd the line tool has the little minus mark (-) next to it. How do i reset it to the (+)? currently i am having to make a line, rasterize the layer and make the next line.
View 3 Replies
View Related
Sep 13, 2012
I used to be able to just open any image and my copyright info would be inserted into the file data. I guess it was a droplet, "when the file is opened or created then add file info from a xmp file". I still have the xmp file with all the data in but i am unsure how to implement it being automatically opened and added to the file when i create a new one? I thought i could handle it, i assume its a droplet of some sort.
View 5 Replies
View Related
Apr 21, 2013
When trying to open a raw file in PSE 5 I receive the following error message
“Could not complete your request because the file format module cannot parse the file”
I checked and my camera Nikon D3100 is listed as a supported camera.
View 1 Replies
View Related
Jul 30, 2005
I'm in the process of prepping individual components of a design for Flash animation. I'm trying to apply a layer of #7C6844 with the color effect at 56% opacity and a layer of #999999 with the color burn effect at 12% opacity to the foreground image which has a transparent background. This task has proved to be rather impossible for me, but it seems like there should be a way to do it. I would use the wand tool > select inverse and apply the colors over top that way, but the foreground image has a lot of leaves and branches, so that method would be extremely tedious.
Is there a way I can select the entire image as a whole and leave out the background?
I'll attach the image and the desired result to further assist.
View 1 Replies
View Related
Mar 18, 2013
when trying to reopen a file from the "recently used" file list? When I try to click on a file from the list it gives me a message stating "error opening file". I know this will happen if the file has been moved to another location, but the files are in the same place as when I originally opened them. None of the files in the list will open anymore. Is this a pathing issue?
View 9 Replies
View Related
Mar 19, 2013
A fellow co-worker accidentally checked the box that says "don't open this file" (or something like that) that appears when a language file is missing upon opening a file from a client. He then also "accidentally" clicked the "perform this action every time" so as the warning window wouldn't appear any more. As a consequence there are now files that we cannot open on that computer. I've searched through system variable lists and come up empty handed.....
View 1 Replies
View Related
Dec 6, 2011
I noticed, that in X4 my file ( in which I'm working) is lost, if I open a new file from the organizer.
In older versions, I could have a lot of pictures on my screen and switch between them.
Is this a "bug" in X4, or is there a way to put this feature back like X2.
Hope the question is clear??
View 8 Replies
View Related
Jun 27, 2012
By Opening File into AutoCAD I can set the Custom Property(dwgname,dwgid,projectname) of the File. But I want to set value of these properties without opening AutoCAD application.
I can set it using:
public void SetAttributes(Hashtable hashTable,String fileOpenPath){
Document Doc = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.Open(fileOpenPath);
Can we create this Object using any other way??
Database Db = Doc.Database;
DatabaseSummaryInfoBuilder DbSib = new DatabaseSummaryInfoBuilder();
Autodesk.AutoCAD.DatabaseServices.TransactionManager tm = Db.TransactionManager;
using (Transaction aTran = tm.StartTransaction())
[Code] .......
View 3 Replies
View Related
Sep 6, 2013
I Have transferred a CS6 Raw photo session from camera to hard disk. Now some files show all camera details and they are working fine but some files show only right photo number and proper file size and Photoshop can't recognize them. The file names are exactly same type. Is there any way to fix these hidden files?
View 7 Replies
View Related
Jun 13, 2004
I am trying to open an EPS file in photoshop. It was only around75k o the floppy but when I try to open it in photoshop it displays a window titled "Rasterize generic EPS format" It then shows the following details.
Width 7431 pixels
Height 12644 pixels
Resolution 72 pixles
Image size 268.8m
If I try to open the image at this time it takes forvever and eventually everything freezes. If I try to open the image at a lower width and height it opens really small then when I zoom in its all blurred.
View 6 Replies
View Related
Feb 23, 2009
this is a 10 year old eps file. we used it to make vinyl cutout stickers.
after opening in PS7, it's just black squares, without all the cutouts in each square.
when opened in notepad, these are the 1st 2 lines...
%!PS-Adobe-2.0 EPSF-2.0
%%Creator:ScanVec CASmate(TM) 1.20
View 5 Replies
View Related
Apr 14, 2005
I have a .DST file on a disc I am trying to open but my PC I think does not have any software to do this.
View 5 Replies
View Related
Jan 3, 2013
I just large sign for a hockey rink. I created it in Photoshop and saved it as an eps( the printer requested it be submitted in this form.) The file is very large( 600 mb) and now that I need to open it to edit it Photoshop just crashes. I am using Photoshop cs5 on 3.06 ghz duo core mac with 4 gb of ram.
View 3 Replies
View Related
Sep 6, 2013
When opening a file in CS6 the file opens at 0.4%. How can I set the view so that the file opes and fills the screen as the default viewing percentage.
View 3 Replies
View Related
Oct 26, 2012
Is it possible to record certain actions on a raw file without opening the file in Photoshop?
Let's assume I have 250 files, all needing lens correction (and maybe other common tweaks) as a basic first step. I'd like to be able to record an action that
(1) opens my NEF file in ACR;
(2) makes the lens correction based on the profile for the particular lens I used;
(3) [other tweak--say noise reduction];
(4) [other tweak--say color temperature]; and then
(5) closes the file generating nothing but the .xmp file.
Then when I go to work on each file, all my basic corrections have been made so that when I reopen later in ACR, I only have to make custom changes before finally opening in Photoshop.I've tried a few things, scanned the forums, checked the online help center, gone through a few Adobe TV tutorials, but I can't figure out how to do it.
View 3 Replies
View Related
Mar 19, 2012
I am having trouble opening an EPS file in Photoshop CS5. Previously, PS wasn't opening at all, but I cleaned up my fonts and I can now open some files. This particular EPS file, however, causes the application to crash every time. I recently had similar trouble with Firefox and Flash and have since upgraded to 10.7. Crash report below:
Process: Adobe Photoshop CS5 [1044]Path: /Applications/Adobe Photoshop CS5/Adobe Photoshop CS5.app/Contents/MacOS/Adobe Photoshop CS5Identifier: com.adobe.PhotoshopVersion: 12.0.4 (12.0.4x20110407.r.1265] [12.0.4)Code Type: X86-64 (Native)Parent Process: launchd [238]
Date/Time: 2012-03-19 21:58:35.446 -0400OS Version: Mac OS X 10.7.3 (11D50d)Report Version: 9
Interval Since Last Report: 7245 secCrashes Since Last Report: 4Per-App Interval Since Last Report: 6379 sec
Per-App Crashes Since Last Report: 2
Anonymous UUID: DFE4BD23-8BDD-4E6D-8961-56DE2808DF87
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
[code].....
View 4 Replies
View Related
