I wasn't sure how large my image would be, so I created a larger than necessary PSD file. I would like to export as little as possible (it's a rectangular image). How can I select just the image for export and ignore the background?
View 1 RepliesI use a lot the "Automate -> PDF Presentation", in Photoshop CS6 (english language) feature, but in the last months, something really weird is happening.When I export a file, some parts of the text disappears, like is being corrupted by something.
My pc specs: win7 x64 - portuguese language
I need to export an assembly into revit on by-part basis, with the reason being the need of preserving properties of every part of the assembly.
However, when i try to do that programmatically, no properties are preserved in resulting families. Here is the code i use:
Sub ExportSeparateComponentsWithoutSupression()
Dim oAsmDoc As AssemblyDocument
Set oAsmDoc = ThisApplication.ActiveDocument
Dim oCompDef As AssemblyComponentDefinition
Set oCompDef = oAsmDoc.ComponentDefinition
[code]........
Is it possible to export a weldment and include the weld volumes? I'm attempting to export to an .stl file and the welds are missing in the resultant file. (Or am I doing something wrong?) The weldment was converted from a standard assembly file, but the BoM structure was set to Normal, not Inseparable.
View 9 Replies View RelatedI'm using VB.NET and Inventor 2010. I want to export parts list from idw file to xls or csv file. I checked the internet but could not find trace only exporting BOM from IAM...
I can open inventor and open idw file in VB.net. But could not reach to Parts List.. I checked Inventor2010ObjectModel and sawDrawingdocument>DrawingBOM but could not get success.
I've created two similar but different base files.
I've derived each into parts that have a few different features.
In both cases, step exports of the base solid are fine but exports of the unique parts are empty.
Step exports of their assemblies are complete except for these parts.
Sat exports work fine for both parts and assemblies.
It happens in 2012 SP2 and 2013.
A while back I took a Photoshop class and remember a lesson on where you could select a region of an image and save it for the web with a high quality and select another region of the same image and save it for the web with a low quality, so that the focal point was saved with a high quality and the background was saved with a low quality. I have no idea where my notes are from this class and can not remember at all how to do this. Can anyone direct me to a tutorial about this?
View 2 Replies View RelatedIn Elements 3 I could clone parts of one open image to another image. How do I do this in Elements 11?
View 2 Replies View Relatedhow can I cut out just a single part of a whole image and not the entire image itself? For example, I have a picture of a girl and the only thing I want to use from the entire picture is her lips. How can I cut those out?
View 7 Replies View RelatedI am using Photoshop CS6 and I want to create a composite of 2 images. One is of the Moon and the other will be of stars. The problem I'm having is removing the unwanted stars from the Moon and the dark part of the Moon (depending on the Phase). Do I create a layer for each image? And is it black over white or vice-versa?
View 7 Replies View Relatedi want to take out the buildings on the right and left of the water heaters, leaving the skyscrapers in the middle. i'm quite a novice at Photoshop and i can't seem to find a good way to do it without having a horrible result.... i tried doing it using the clone stamp and spot healing brush, but i just cant seem to get a good transition of the background sky from dark black to lighter grey once i take the buildings out..
View 9 Replies View Relatedneed photoshop to split image to two parts and paste the second to the bottom of first in photoshop and need macro for this as i need to do for 1000 pages.
View 1 Replies View RelatedI have a picture of a trumpet. I was wondering how you could take the image and blur the background, leaving the trumpet in focus. The "flaring" or putting lighting effects on certain spots of the trumpet, like the valve tops and bottoms.
View 7 Replies View RelatedNot sure if this should go under Photoshop or Illustrator, but whenever I export an image to Photoshop it gets flattened and I can't do anything with it. I've checked and double checked that Write Layers, Max Editability etc is ticked but then I get a box saying "some containers in AI have been flattened".
View 19 Replies View Relatedhow do i reduce the opacity on parts of an im age, i have tried selecting part of the image with the marque tool and then reducing the opacity but it still reduces it for the full image.
View 4 Replies View Relatedhow do i reduce the opacity on parts of an image, i have tried selecting part of the image with the marque tool and then reducing the opacity but it still reduces it for the full image.
View 2 Replies View RelatedI have an image which is currently surrounded by a white background that I want to get rid of.
So far I have selected all of the background and hit delete, which appears to have deleted all of the white background as it shows up transparent.
However when I save the image as a TIFF an then open it up in Illustrator, the image still contains the white background.
I am looking for a quick solution of numbering around 75 things on a picture. I want to specify links of a screenshot using numbers. The way I imagine this, it would be a number with a circle around it, however, if I do this manually, it would take foreever, and I'm very limited in time. I am looking for a quick solution.
View 1 Replies View RelatedI have a panorama jpg image
width: 2400 pixels
height: 1600 pixels
Is there a way I can automatically create 4 cropped images,
each with size 600x400 or I have to do it manually?
how to get this effect.. it looks sweet and i need to use it for something..
View 9 Replies View RelatedI'm exporting a Photoshop design into Dreamweaver. I know HOW to slice, but I'm having a hard time finding the reason WHY to slice an image for importing into Dreamweaver. Why not just import the whole image, as a single, whole image?
I'm also having trouble finding the best way to slice an image. This is all very new to me. I looked at a webpage I created almost 5 years ago (my first exposure to web design) and I sliced the top of the page into 3 images - I had two prominent images on either side and the middle was the background. I then divided the middle bar (with the buttons) and made each of the buttons their own slice/image.
However, I just came across a website where they ultimately have their design sliced into just three images - a logo, buttons and a top layer image.This is the site I came across: URL.....
My slicing looks something like the opening image under the "Killing the Clutter" heading of this website, not the closing image (their goal) under the same heading.
Why are they singling out the logo? Should I be doing this with my design?Why are they including all buttons within one slice, instead of individual slices? Is this OK to do? For purposes of the rollover image, I thought they had to be separated.They're not saving the background. Should they be? Unless they're importing the background as one large image.
who might recommend not slicing an image and doing stuff with code instead, but I don't have the knowledge to go that route and I have to slice the image.
How do i cut out multiple parts of an image for example if i want to isolate a tree from the background and cut out the gaps in the foliage as well as the outline.
I have been using refine edge and the quick select tool and getting great results, its creates a layer each time but i cant work out how to show all the cut outs i can only seem to see one at a time instead of all the transparent background, i assume its something to do with layers and masking perhaps.
I have an image that I rendered in 3ds Max 2013 using iRay. There is a visible horizon line present in the image that I am trying to edit out. However, adjusting the levels, curve or exposure does absolutely nothing to the part of the image I am trying to edit. They do however work on the parts im not trying to edit. I'm sure this explains very little, so here is a lower res version showing whats up.
Try to edit the levels on the TV layer; the matte shadows and horizon line stay the same, while the TV adjusts as expected.[URL]...
I have an image file that was created in Photoshop. It was sliced into buttons and parts of buttons. I am trying to reassemble all the parts in Photoshop elements. I drag and drop the parts onto the canvas. I turned on the grid. I noticed that each part I drop onto the canvas creates a new tab and what looks like a new layer. I don't want this. I would like to import all the parts of the button images and reassemble them on one canvas. I have imported the images into the organizer but it seems like I can only drag and drop the image parts one at a time onto the canvas.
View 1 Replies View RelatedI recently started using Adobe Photoshop Elements 11, and it looks really great, but I cannot figure out how to make certain parts of an image transparent. I pasted an image in, and there is white around the sides, and I wanted to get rid of them, by making them transparent. How I would be able to do that
View 1 Replies View RelatedHow do you get to dodge and burn in photos shop elements 11
Also when I used the spot healer I am left with a smudge after I try to erase unwanted parts of an image.
So, I'm developing a game currently and have been drawing some character portraits (busts if you will) in Illustrator CC (v17.0.0 32-bit). After finishing each portrait, I need to export them into a .png file that I can then use with MSPaint.
My troubles are that I always run into one or more of the following problems each time I export an image:
If I save the image at 72ppi, the exported images are the correct size but, they have jagged edges, which just aren't acceptable for my project.If I save the image at say 300ppi, the exported images are blown up and are too big but, they have smooth edges, which, while I want smooth edges, I cannot work with the increase size of the images.Sometimes exporting the images causes a new line around the smooth edges (I think I've heard this effect called a Halo or something along those lines), which is also unacceptable because I need a transparent background.Also, if I resize the blown up image manually, it causes develops the third problem.
What I'm after basically is to be able to export the image on my artboard into a .png file, have export at the same width and height it does when I export it at 72ppi, while keeping the edges smooth like they are when exporting it at 300ppi.
As a side note, I currently don't have a suscription/access to photoshop and don't have a way this month to gain access and though there are freeware programs that do a lot of what Photoshop is capable of, I can't seem to figure them out. I've mentioned this just in-case potential solutions require photoshop
When I export my images from LR4 to CS5 using the Edit In... choice, I first get the ...may require the...Camera Raw plug-in version 7.0... which we all know doesn't exist. Not that that isn't annoying enough (I know - I can turn off the warning) but the image then presented in PS5 is not of the same quality as the one I am exporting from LR4. It's almost as if the Lightroom adjustments are not carried through. I have tried all three color space options to no avail. Also, I am not being presented with the dialog asking if I want to edit a copy with Lightroom adjustments. These are Nikon RAW files (.nef) that I am working with. Other images that are not RAW files do display the Edit Photo with Adobe Photoshop CS5.1 dialog.
View 2 Replies View RelatedHow do I exporting one frame as an image?
View 1 Replies View Related I'd like to export a design as a PNG image. The document color mode was set as CMYK and I've only used CMYK colors but when I go to export, that option is not available (as you can see in the picture).
Can't .png images be exported with a CMYK color mode? If I export as .jpg then there is no problem but in this case it has to be saved as a png image.
icon.cdr
I have a problem with exporting bitmaps (for icons)., The resulting image is totally distorted compared to the original document. I define document size to 16x16 pixels with a 72 dpi resolution. I would like to have the exported bmp image to be an exact copy of the illustration, thus having unchecked the anti aliasing function and every object is designed to match the pixel size. The same happens if I try to convert the graphic to a bitmap, see screenshots below. I have attached the original cdr file.