I'd like to insert a text into a custom shape I created - let's say that of a fish or a simple circle. And would like the the text to completely fill it. (not flow on it)
To be clear - I'd like to have the word fish - shaped like a fish and the word circle - shaped like a circle. (for the second one I tried the wrap -> bulge but that's not it)
I'm using CS3.
I'm creating a logo that consists of the word DIFFERENT in text and a shape, a dot (an ellipse) that I want to appear above the I and be vertically aligned with I.
How can I do this?The problem is that I can't see how to identify the point in the text - the centre of the I - to act as the target. I can't seem to get any of the Snap to Object tools to work.
I feel that I should be able to mark a specific point anywhere on a shape or an object and use those points to align.
I suspect that I could achieve the effect that I want by splitting the text characters up into individual objects, than I can align them more obviously but then I set up some other issues with kerning.
I'm working with CorelDraw X3 and want to fill text into a round shape, while keeping it's exact outline. Hence, cutting of parts of words and letters is fine with me as long as the shape is well-defined. Unfortunately when filling paragraph text into a shape, the automatic line breaks lead to a quite irregular shape regardless of font size.
As workaround I arranged a mask in front of background and text but this requires a square paragraph text which is larger than the background. Since paragraph text obviously cannot be cropped with other objects I made the mask size bigger and filled it white. When exporting my document as image everything looks neat, but there must be a better way to do this in CorelDraw itself?
I tried converting the paragraph text into artistic text and cropping this, which works fine for a few words and a small object. But I'm talking around 1000 words here, and trying to crop this artistic text leads to very random cropping results. I guess such a large number of objects and knots is too much for CorelDraw to handle!?
I want to engrave the text 'TEST' all the way around this clonal object. When I use the emboss tool, selecting the option 'wrap to face,' it gives me an error message that the "face selected is not tangent to the profile plane."
I am using a work plane that is offset from the XY plane. I included a screen shot and the file that I am using (Inv. 2014)
Text is allowed only on the outside of a rectangle shape. The text cursor disappears when I try to enter it into the rectangle and when I place it on the edge of the rectangle, it rurns into a slanted "A" and allows texting on the border of the rectangle. Corel Paint Shop Photo Pro X3 (build date Sept 7, 2010). This software came with my new HP Pavilion dv7.
View 1 Replies View Relatedhow to curve text within a shape, as paragraph text, not artistic text? (See my attached image.)
I have drawn the shape, inserted the text as paragraph text, but the text always wants to sit straight. I am so frustrated as I can find a workaround in either Corel or Adobe CS products. I have tried using artistic text in Corel, but have to do it line by line - and this brings other problems, such as I cant justify each line with each other, and sometimes a character jumps up relative to the other characters and the entire paragraph does not taper in...so this is not a solution, apart from the fact it will take me FOREVER to insert line by line....I would like to treat the text as a multiple line paragraph, and follow the shape.
I'm trying to figure out a way to make a shape (a diamond stretched horizonally) and then type a word that will fit into that shape. I have tried making an envelope distort with top object in illustrator (under the object menu),
i don't even want the letters to go all the way to the corners. basically i just want them to squish vertically along with the lines of the diamond shape.
I have a Text Shape which dynamically changes it's value to represent the x coordinate value when a box is translated on the x axis. I achieved this via script controller attached to the box object. This works perfectly, however I need to keep the position of the decimal point in the same place as the coordinates changes but because the value and hence it's length changes, it's position changes accordingly. For example if the value is 3.141 and this changes to 3.14 the decimal point moves to the right slightly as the length of the text shape updates.
View 2 Replies View Relatedhow to convert from text to shape. I this case I have a shape that I would like to conver to text so that I can use it as a bullet. how to do this in photoshop CS5?
View 4 Replies View RelatedIm trying to put text into or inside a circle so it fills up the circle,i will just be using one word not loads of words.
View 2 Replies View Relatedwant to put text inside an oval following or outlining the oval shape [URL]....
View 1 Replies View RelatedHow do you put text in a shape or picture that you have so it takes on the shape of the object? I'm wanting to use the school mascot for the outline that the text will fit into. And how do I do the outline of the mascot for putting the text in? I was hoping that when I started typing the text could just flow in the shape and I wouldn't have to enter, etc.
View 6 Replies View RelatedIs there a way to get text to take the form of a shape... fitting inside the shape. Like inside a diamond so both ends are narrow. Without upsetting the perspective. Or like the harley davidson logo?
View 1 Replies View RelatedI've tried to custom shape tool and created a heart, but the text wont go the direction I want it to... I want it to start at the bottom left and go up and finish on the bottom right.
View 2 Replies View RelatedHow can I make transparent text on shape? Text must be editable.
View 2 Replies View RelatedIs there a faster way than having the image on a background layer and positioning all the text word by word? I want to do this for the state o hawaii and have the cities make up the islands. There 8 islands and it gets to be a little much jus word by word.
View 9 Replies View RelatedI'm trying to put a background (a very blurred scenic shot) onto text or onto a (complex) shape. How do I do this? Does it have to do with layer masks?
View 2 Replies View RelatedHow do one write text inside any shape in photoshop? I want to write about 30 lines inside a circle, with the text curving inside the circular path. For that matter, how text can be written inside any shape be it polygon, star etc. I don't want to write it around the boundary alone but the text hsould fill the whole shape inside.
View 3 Replies View RelatedI've just watched the video based on Elements 10 showing how to create text that follows a shape etc. However, I don't get the submenu for the Type tool to enable me to do this.
View 1 Replies View RelatedI am making an 8x10 poster with a very large number "8" in the middle. I want smaller text above and below the number. When I try to click the text tool below the number, it won't permit me to because of the space required below the number.
Can I turn the text number into a shape so that it doesn't have any space requirements around it?
Is there a new way to fill a shape or path with text in CS6.
When I create the path I can put my text tool "over" the path & my cursor switches to a curved line through the cursor, but when I place the cursor "inside" the path it just goes back to regular cursor & if I click inside it just starts a new (regular) text layer.
In older versions as soon as I placed my text cursor inside the path it would switch to the text cursor inside parenthesis. And thus type inside the path. That doesn't happen anymore.
I have tried to no avail but how on earth do i shape a word into this shape. with the straight line on the top and pointed on the bottom. trying to convert this to vector.
View 6 Replies View RelatedI have photoshop cs4. Here some questions:
1) how to edit multiple text or shape layers (text size, color, size etc..)? i tried link the layers and hold shift key, but it does not work.
2) Why when i drew shape i don't have ideal edge. Every time i need to zoom and fix with transform tool. Even when i drew with rules, grids this happens.
3) How to make like this? when you save file for web as image black part don't show up and you don't need crop this?
I am wanting to do some images prints but using text. I want to shape the text into the shapes of certain images eg waves, Christmas tress, castle, babies pram etc is this something i could do with elements?
View 1 Replies View RelatedUsing Photoshp CS5 Extended and Windows 7 Home Premium. I try to convert a text layer to a shape and I'm told it cannot, becasue I have a faux bold style. Thing is, I don't have it set to bold. I tried with Tahoma and Ariel. I tried it as none, sharp, crisp, strong, and smooth. I checked other messages here about faux type probs, but no luck.
View 4 Replies View RelatedThe Photoshop CS6 (13.0.4) selection, text, and shape tool causes colored artifacts on screen. I'm running on a retina Macbook Pro updated to the latest ML release. I have disabled GPU acceleration. I have also tried starting Photoshop with no plugins but this does not work.
I have created a video which shows the phenomena
[URL].........
I created a selection, filled it and put text on top of it in a 72 ppi file and copied the group to an image with much higher resolution. I transformed the shape and text to make it bigger. Does doing this affect quality?
View 4 Replies View Relatedim writing text inside a shape and ive got that far ive even changed font sizes, now id like to write smaller text in the gaps between different font sizes. im using PSCS2.
View 9 Replies View Relatedfit a box of text to the shape of numbers. I work at a screen printing company and working on some school leavers hoodies. They would like the names to make up the year. I cant seem to figure it out on corel.
View 2 Replies View RelatedI have a shape (an Open Book) that I would like to Fill the two Open (showing) Pages with Text -I thought of just making a smaller than the page text box under page shape for each page; but, then I thought I'd check with You Pros here and see if a Shape could have a 'Text' Fill...?
View 2 Replies View RelatedIn vectorworks, you can mask or fill a shape so that whatever behind the shape will be mask. I find it extremely useful compare to Autocad where I have to keep trim and extend for every change.
see picture
As for the text, the dimension text can do color fill where you can fill with background. is it possible to do the same for a multiline text ? I'm not familiar with any coding or add-in so if I have to use them for mask .