I've not written out a profile and Im brand new here.
But what Im asking for help with, is this :
Whenever I go to use the text tool in my Photoshop cs3 extended it says the function was unable to work because something prevented it from initializing.
I just installed the trial version of CS6 and it's working great so far, except for one major problem. I can't use the "save as" function at all, when I click it, it does nothing. No errors messages, just nothing.
View 4 Replies View RelatedThis used to work, but now it won't work at all, even when opening a file from scratch.
View 6 Replies View RelatedI draw a line with the pen tool, right click and then 'stroke' the pen line with a brush (for example). I imagine I've done this successfully thousands of times but for some reason it just isn't working today (or yesterday actually!). When I right click then go down to 'stroke' nothing happens at all.
However it does work if I go into the 'paths' palette, right click on 'work path' and stroke the pen line with the brush.
I've now finally got PSE12 installed. However the 'Add People' functionality is not working.
In the 'People' tab, when I click the 'Add People' button I get the 'preparing files' dialogue box. I then get a message saying "You have labelled everyone in your selection" (whether I've made a selection or not in 'Media'). I can 'add people' in an individual photo but not by clicking 'add people' either in Media or People view. This worked fine for me in PSE11.
I'm using Windows 7 and don't have any other PSE versions installed.
I have been using Elements for quite a few years and have had no problem in resizing images until last week. I often use the option of resizing using the cm measurements I want. When I tried this on my laptop last week the programme would not allow me to change any of the figures in the resizing dialog box. I tried cm, pixels and percentage and none of them would work.
I tried a number of different images from one file but could not resize any of them however I opened an image from another file which I know i have resi9zed in the past and this time the function worked fine.
I copied the image I couldn't resize to my main computer which also has Photoshop Elements and the resize function worked fine on this computer.
I uninstalled Elements and then re-installed it on my laptop but still have the same problem. I also have Photosphop Cs4 on my laptop and the resize function has stopped working in this programme as well.
Have just upgraded from Elements 9 to Elements 10 and used the File -> Rename function to rename 3000 files with a new Base name beginning 'Base' the process reported it had completed and did not provide any additional messages - but checking the result not all files were renamed and a large number were left behind with the original Base name.
View 19 Replies View Relatedhave just loaded 2013 along with service pack.
dtext function not working. when doing dtext but using the insertion point of some previous text. will not move to next line unless some text placed on first line. is there a setting, no issue in 2011
ACLT2000 on a Windows XP machine.
In the last day, one of our users has lost his ability to Group. Whether he selects objects and then pulls down "Group" from the tools menu or vice versa, the objects do not group. The command line text doesn't give any errors or other indication of what is happening.
The export dialog box seems to work. I hit EXPORT and it goes to export. Then the operation gets stuck and the image won't export.
View 3 Replies View RelatedI'm new to Lightroom so I might be screwing this up somehow. I pick the Overwrite without warning option on the export function. I've noticed that it pops up the dialog saying X file will be replaced. I click Ok and go to my pictures library and only the unedited original is there.
View 1 Replies View RelatedCC InDesign 9.2 update has killed my Undo/Redo function - it's always in light grey...
View 3 Replies View Relatedi'm trying to create a LispFunction in vb.net in visual studio 2010 (tried both .net 3.5 and .net 4.0) and it's like autocad is just ignoring them. is there a setting or something to disable .net LispFunctions from being loaded? CommandMethods work just fine, and i'm not seeing any errors. in fact i'm using the most basic of functions, just returning the arguments. and nothing. Any diagnostic or something to determine what's the matter?
<LispFunction("HelloWorld")>Public Function HelloWorld(args As ResultBuffer) As ResultBuffer Return argsEnd Function does nothing, when i setq a variable on it, it's just nil.
LR 3.6 Import function has stopped working. Worked fine one day and stopped working the next. No Files Found to Import yet you can see the files trhough LR in the import step while the little message in the bottom right corner says "Finding Files".
View 2 Replies View RelatedI can't get the select other function to work. When doing a measurement, if I right click on an item, then click "select other", nothing happens. This also is the case when applying constraints. In application options, the select other timer is set to 2.0 sec., it is not set to off.
View 7 Replies View RelatedAll of a sudden my Copy Function quit working in Corel x5.
I can copy from other programs and paste into Corel, but I cannot copy from one file to another file (or the same file even) within Corel.
I was told it could be a possible update from Windows 7 causing it and that I need to reinstall my software.
When I paste an item in the assembly, the item is thrown off in space. It places it so far away that it is not even in the view window. I have to stop what I doing, do a find in window and then drag it close to where I need it. Then I can start constraining it.
Why does it not place the item at my coursor location like it used to?
I am using SP1.
I know that you can make a shape in CS and text follow this shape.....
However I cannot figure out how to do it....
Make an circle and write text around it
with screen resolution but all other adobe products i have doont have the problem that photoshop has.
View 6 Replies View RelatedI am experiencing two problems. One is the tool icons in Photoshop are disappearing on the screen. I move the cursor and see nothing on my screen.
The second problem is at other times the proper tool icon and function is not showing up and working. I select for example the pen tool and the hand tool icon show up and the function works as the hand tool not the pen tool?
I am trying to use the function to outline a border to text with the function "Path to text" but no matter how I try the path will only use 16-19 letters in one row.
I have read several guides on how to do this and no one mention anything about this issue. As long as I have 16 letters on one line it works, but I have more it will just skip them.
I write the text:
12345678901234567890
Then I click an choose "path to text", but when I do it will only create a path of 1234567890123456 and skip the rest. If I write text on several rows it will use up to 16 letter on each row.
Is there an limit to "Path to text" .
It seems that the Text Tool has lost it's ability to highlight text for editiing in one particular file. How to regain the highlight?
View 6 Replies View RelatedIs there a way to make the Text entry function like in PSPX2 and X3 where you fill in the box with the text and arrange it before it applies it? I now have X6 Ultimate, just getting use to some of the changes.
View 3 Replies View RelatedThis seems absolutly silly.
(setq p1 (getpoint))
(setq p2 (getpoint))
(setq Dist (distance p1 p2))
Why does this not work?
I'm trying to build a command to replace AutoCAD's "DI" command, to give distance and delta x, y, and z values in decimal and imperial, and keep the angles in XY plane and out of XY plane.
where is the "load logo"function in text editor, i don't see it.
View 2 Replies View RelatedI would like to create a colored circular text using File > Create > Logo > Circular text ... but everytime I try, the circular text is displayed in black ... ! How can I change this and choose the color for the circular text ?
View 2 Replies View RelatedI am wondering if Autocad has some sort of function for creating quantities of continuous order text. Example: I have a grid for which each cell needs a label as such A-001, A-002, A-003..... etc.
I didnt know if there was any function within Autocad that serves as a text generator for something of the such.
Right now I have just copied the first Cell "A-001", pasted in all the other cells, and am individually going through and changing each number. This is a lot easier than generating text each time but it is still quite cumbersome.
I have a massive block of dummy text set up in Illustrator 5 and the easiest way for me to change the dummy text is to overwrite it as one would when using the Insert function.
View 3 Replies View RelatedI am creating a template that will have four text boxes that I will populate from a merge document. I need to have the envelope feature applied to each of the text boxes so any long text will be compressed to fit in the designated text box.
I understand the basic function, input text, select text, select Envelope feature but that sets the envelope box to the size of the inputted text, where I need a fixed text input box size.
I am new to VBA for Autocad and have basic knowledge of Autocad, but have experience with VBA with EXCEL. I am trying to search for text written on to a drawing that has been written as plain text. There is no table. I am writing code to open each drawing in the file as a for each next loop and then find text, then copy text to a table cell, in a table set up within the loop statement. Then I intend to transfer the data to Excel. When I copy the text into the cells of the table and transfer to Excel, the text does not transfer. Is there something I need to do to re-format the text copied straight from the drawing into the table cell. The drawngs have been produced by some external drafting service provider, most likely in India. The functionality of Autocad has not been used and therefore, there are no tables. The text titles, sub-titles etc... are just basically text with lines drawn around them, to simulate a table that looks like a table but are infact not.
My main problem is copying the plain text (titles, sub-titles, references etc...) into a table cell for export to Excel. Any knowledge of copying Autocad plain text to Autocad table cells
I'm trying to be able to have a function run another function with the secondary function being passed as an argument to the first. I'm trying to create a recursive function and the recursive part works great. I just need to be able to have the recursive function run other functions to actually do stuff.
Here is something I found that should do what I need, mainly run a function from a function name in a variable.
Sub test() Dim ftnName As String Dim argument As String Dim result As String ftnName = "myFunction" argument = "cat" result = Application.Run(ftnName, argument) MsgBox resultEnd SubFunction myFunction(inString As String) As String myFunction = inString & " has " & Len(inString) & " letters."End Function
However I get the error "object required" on the "result = Application.Run(ftnName, argument)" line. So I'm guessing the Inventor VBA doesn't like this method of doing this. I'm just hoping there is a way to do this or this function will be useless or reduced to hardcoding functions which still defeats the purpose.
