Photoshop :: Switch To Install With Progress Bar...
May 10, 2008
I have successfully installed Photoshop CS3 onto Windows XP SP2. However, I do not want my install to be completely silent: I want to see a progress bar.
For silent install I use the following switch: setup.exe --mode=silent
The next line in cmd says"UI:Silent"
If I use no switches (only type in setup.exe), the next line in cmd is: "UI:Full" Also, "setup.exe --mode=gui" will initiate "UI:Full".
What are other install switches? I want a silent install with a progress bar only.
View 5 Replies
ADVERTISEMENT
Jan 9, 2013
If there is a way to switch between the eye dropper/brush tool fast.
On Photoshop there the "alt" key but on my mac it really wastes a lot of time for blending colors .
View 2 Replies
View Related
Feb 18, 2012
Problem:
When ever i insert a gradient or a photo it comes up with a progress bar which takes ages to load and it used to load in 1 second but now it takes ages , i have looked every where but there was no results, I am currently editing a Wedding Movie in a different Program but i also need to make a menu for when the DVD is in the DVD Player but i went to Photoshop to edit a photo but this happened and i have reinstalled it but nothing has changed. I have tried the Edit then Performance solution but that did nothing.
View 6 Replies
View Related
Apr 29, 2008
To open a 200meg PSD file in CS3 takes about 20 secs, I get this progress bar come up
saying Reading Photoshop Format... is this normal?
I have a fast P4 processor, 2 gigs of Ram and large separate hardrive I'm using as the scrtch disk.
I am curious becuase my friend has a less efficient system running CS3 and he gets no progress bar or delay when opening this same image or any large image for that matter?
View 9 Replies
View Related
Jul 4, 2012
is there a way to get the 'classic' SAVE progress bar behavior under Ps 13..i usually save large files and can't seem to get the hang of spotting the tiny % in the title bar...
View 14 Replies
View Related
Oct 14, 2008
When I was working in Photoshop CS2 yesterday, a "Progress" Folder appeared at the bottom of my screen in the taskbar area. What is this? Never seen it before. When I clicked on the Progress folder, nothing happened.
View 2 Replies
View Related
Apr 17, 2013
I have CS6 installed on a Mac Pro desktop, 3.3 Ghz dual-core processor, 6 GB RAM, several physical drives configured as scratch disks, and no other applications running. I CAN'T be running out of RAM.
The files I'm cropping are .PSD files, no larger than 34 Mb in size. I can't even crop a web-res image - the progress bar grinds to a near halt half way through a simple crop. The machine has not locked up and PS does respond to "cancel" commands.
Graphics card is an nVidia GE Force 8800 GT, and the drivers are the latest from nVidia.I've restarted the machine and restarted PS. Delete Photoshop preference file and try it again?
View 4 Replies
View Related
Aug 21, 2013
Cannot get out of it in fix or organize.
View 1 Replies
View Related
May 24, 2012
I had a situation where I had to quit Photoshop immediately, but it wouldn’t let me because a background save was in progress. I don’t like killing a program with the Task Manager during a write operation, but that’s what I had to do.
If there’s a way to cancel a lengthy background save or to view its progress, I haven’t found it yet. There needs to be a way to do this.
View 2 Replies
View Related
Nov 25, 2013
After editing a photo with PSE12 a red bar remains across the photo indicating edit in progress, only it never goes away.
View 1 Replies
View Related
Mar 14, 2013
I have CS2 Premium which I'm running on an older PowerPC Mac (G5 - Dual 2.3 GHz ) running OS 10.4.11. I've had this setup for many many years (registered/activated with Adobe) but suddenly one day I could no longer launch my Photoshop app: when I clicked on the Pshop icon it would start the launch (open) procedure ... and then almost instantly it would quit (in just a few seconds ... before the application even got to the 'title/credit' screen).
I've recently tried uninstalling CS2 (everything except Acrobat) and I ended up doing a manual uninstall of Version Cue. I've been on Macs for 20+ years so figured this would be a pretty straightforward procedure - uninstall -> reinstall and then back to work. Nope.
I'm attempting a fresh installation direct from the original CS2 CDs. In any event, when I try to (re)install CS2 - and after going through the standard screens with Adobe's usage terms agreement and installation hard disk selection - I arrive at the screen where one selects which application(s) to install by checking the various boxes (or alternately, to install the entire suite) but the 'Adobe Photoshop CS2/Adobe ImageReady CS2' line and checkbox are grayed out, so it will not allow me to check them and continue with the Photoshop installation process.
View 13 Replies
View Related
Oct 15, 2013
In V12, for the large Catalog that I have converted from V8: After closing in the PSE Editor the edit of a photo, the horizontal red bar with the text "Edit in Progress" takes typically much too much time to disappear from the PSE Organizer. I am seeing this problem wrhen using the large V12 PSE Catalog (around 70'000 cataloged folto files, including the multiple versions within Version sets), that I have converted from PSE V8. With V12, typically for the jpeg photo Files that i have shot this year with my Nikon D5000, it takes around 16-18 seconds between
- the time where I complete within the Editor closing the edit
- and the time until the red bar disappears from the Organizer.With V8, this took only a couple of seconds.
I noticed that for my older photos shot in 2004 wih a Canon compact camera (and originally cataloged with PSE Version V3) , in V12 this is much faster: a couple of seconds (I will need to measure that more precisely), even though I use the same V12 PSE Catalog, the same PSE Preferences and the same Windows 7 based PC for the tests with the recent photos of my recent D5000 cameras and for the tests with the old photos of my old Canon compact camera.
I do not understand, why these timing differences between the photos shot with my modern NIKON D5000 and the photos shot with my old Canon compact camera. There is a difference in the file size (around 3.4 MB vs around 14.MB ); but I doubt whether this can be the explanation.
Also, I noticed that in "Information --> Metadata --> GPS" the Organizer sjows me for my Nikon D5000 photos (just) the following entry: GPS Version 2.2.0.0 (something that is not shown for the photos shot with my old Canon compact camera). Myself do not use GPS datza (at least: not concsiously). There are probably also other differences in the Metadata.
I remembder that many years ago, I was seeing similar long times for some activities (I do not fremember which ones). After some investigations, it turned out that the reason for these long times was a component that was trying to adccess rersouces that were not located on my PC but were instead located remotely on the Laptop of my wife (which was in the same Windows Home networjk)
Sees in V12 long time for the red horizontal bar to disappear? Do you have an explanation for that?Some Notes about my current environment:
In the Preferences of the Organizer: All Media Analysis Options are disabled/unckecked: in the Preferences of the Organizer: Adobe Revel Agent is disabled and none of the Dialog fields in the "Adobe Revel" panel have been set..Thumbnails are all built (at least, this is my impression)t Watch Folder is diable. Killing the Elements.I have deactivated the Adobe Active File Monitors of all PSE Versions that I have installed - this did not work..I have not installed PRE V12 (but have previous Versions of PRE installed)
View 13 Replies
View Related
Dec 19, 2013
I am using export action to generate artboard images in JPEG from my plug-in. The "Exporting Artwork..." progress bar is shown when the images are generated. I want to disable this progress bar. I've tried using AIAppContextSuite::AllowProgress (error = sAIAppContext->AllowProgress(false);) but this doesnot disable the progress bar. I'm I using this correclty? Is there any other way to disable progress bar?
View 1 Replies
View Related
Apr 4, 2011
in my plug-in, I want to show the progress bar of a operation.I used AIUserSuite(AIUser.h) like ----
sAIUser->SetProgressText(ai::UnicodeString("Progress Bar"));
sAIUser->UpdateProgress(currentOper + 1,max); // in a loop where currentOper is increasing
since both function does not return any error code so I am enable to get know what is being wrong . Is there other way to use this? Is this require multithreading?
View 8 Replies
View Related
Jul 4, 2012
Is there not a way to save the progress of your timeline? So far my workflow has me editing every clip in library mode, then transferring it all down to the timeline so I can insert music, titles, transitions, etc.....and due to the size of my project, I wasn't able to finish before leaving tonight. So I saved everything (or so I thought), but when I opened my project later in VS again, there was nothing in the timeline! (it saved all of my edited files above in the library, but all of my work on titles, overlays and music was lost). Did I do something wrong, or does this program force you make all of those detailed edits and additions in one fell swoop without any chance of saving or taking a break?
View 4 Replies
View Related
May 23, 2013
When I am done working on a project for the day if I save it (save or save as) the next time I open the Vsp file, it is all in the main timeline. Can't edit titles, transitions or anything. Basically, it is like flattening an image. Using VS Pro 5 Ultimate.
View 8 Replies
View Related
Jan 13, 2010
I was working on a picture; I had no other programs running and out of the hundreads of photos Ive edited, nothing like this has ever happened.
It was going to my best edit ever and the file size in GIMP was a little over 1.02GB which is fine. Right when I added some HVS Noise to a portion of the image the little green loading bar froze at the end but the effect sti'll worked. I go to move the layer down and everything just stopped.
I cannot re-make that image. I loaded the task manager and created a DMP in hope that I may be able to read it.
Is there anyway to get all that progress back? the DMP file is 290MB so I'm thinking that it saved everything but I could be wrong. I have not loaded GIMP since.
View 2 Replies
View Related
Nov 29, 2012
Try to realize the progress bar as a flash extension?
i tried to realize a progress bar as a flash extension, but the flash ui with the progress bar freezes, because my time consuming process ssems to block the flash ui.
In the first step I moved the time consuming algorithm into a separated thread. At first I used a dummy time consuming algorithm to keep the tests simple and the progress bar worked fine. Then I replaced the dummy algorithm with the real algorithm, but the algorithm did not work. I could not invoke Suite functions of the Illustratok SDK. I assume that after the plugin main thread had invoked my worker thread and returned, some resources are released.
In the next step I tried to move the flash extension handling to a separate thread, but then loading the extension by the SDKPlugPlug hangs. I assume that the extension handling is an event based process. Since my new created thread has no event loop, the extension can not communicate with my thread.
View 1 Replies
View Related
Dec 4, 2012
Using Lightroom's new book feature? I can't find where to save a book that I am in progress with in Lightroom 4.2. Why doesn't LR have a "Save as" feature like 99% of all other programs on the planet? !"{}#@!!!
View 3 Replies
View Related
Aug 10, 2011
Not a big deal, but, when I'm saving a file in X3, there's no progress bar. Is there anything in Preferences that I can click to show the bar? I haven't been able to find anything. It would be nice, especially when saving large files.
View 2 Replies
View Related
Apr 25, 2012
If I manipulate any point, or select a point group, or perform ANY action involving points in my drawings, a "Sorting" progress bar appears in the lower left hand corner of the screen, and if it's a drawing with a substantial amount of point data, it can/will lock my computer up.
View 7 Replies
View Related
Aug 29, 2013
Smoke 2013, ext. 1.When rendering almost anything, I get Frame x of y. Where x is substantially greater than y. i.e., frame 1236 of 900. I also get the time as negative. Don't remember any other version doing this on a regular basis.
View 1 Replies
View Related
Dec 8, 2011
how to use layers, and how to get the colors under the black ink-lines. The results are so good, I am able to do professional-level work with this excellent coloring/image-manipulation program. Yes, I'm doing paid work with GIMP 2!
However! As I am still experimenting with several techniques [I found that scanning in at 600 on my scanner produces good-enough quality linework to color etc], I tried one cartoon frame at 1200 and although the resolution is excellent, the higher res has meant the program is slow in shutting down/flattening layers, etc. GIMP works fine in 600 resolution and I will stick to this in future.
Is there any way I can convert the resolution down from 1200 to 600 halfway through, which would save me from starting the color from scratch again? I may also have a problem e-mailing the finished pro cartoon artwork at 1200.......The image is in xcf format.
View 6 Replies
View Related
Dec 22, 2013
I perform certain actions within its handler menu goМenuItem - delete some objects; do other invisible; run through certain actions by PlayActionEvent(), e.t.c. then export the file again through PlayActionEvent("adobe_exportDocument" ...) and see that after all my activities were canceled - a document recovered to the initial state, and after each export and save the need to repeat the entire sequence again. Moreover, on some computers to export certain actions randomly do not work.
View 7 Replies
View Related
Mar 13, 2014
Since upgrading to InDesign CC I have noticed that all print progress dialog boxes stay on top of all windows, even after switching apps. I find this highly annoying and want it to go away. Is there a preference I can change to make it NOT be on top, especially when I've switched to a different application?
View 2 Replies
View Related
Dec 1, 2012
When I'm doing a large import, all I can see is the little white progress bar in the upper left. Since it sometimes gets hung up on an operation, it doesn't provide enough feedback about the processes.
I'd prefer to be able to double click that and see a full activity report in a new window of what is getting imported as it's happening, with a separate progress bar for each item. I'd like to see this for all other actions as well, but importing would be my priority.I requesting a new feature? I'm running Adobe Photoshop Lightroom 4.3 RC [858820].
View 1 Replies
View Related
Aug 14, 2012
I cannot open AutoCAD 2010 because there is an "Export in Progress". A window pops up that says, "The license for this product is currently being exported. You may not use a product whose license has been or is being exported. To use this product, import the license back to this computer when the export has completed."
After talking to my technical department at the office, I confirmed that no one was trying to export the license on my laptop. I'm not sure how this has happened. Did I or someone mistakenly hit export on my computer? I have never seen this before.
With this, is there a way to stop the license export process? It appears that I can resume work if the process is cancelled. Please note that I do not have admin privileges.
View 1 Replies
View Related
May 1, 2012
I am conforming three 2 minute long sequences and am trying to soft import all the footage, then conform, then consolidate to 24 frame handles, then Store Local Copy all the footage (only used in each sequence). I feel like i used to get a "Pending Render" super over the preview player in the Library. For some reason i am not getting this message. Is there any way to check the progress of the Store Local Copy, or to make sure that smoke is actually storing a local copy? The drive that the media lives on is a 2TB GRaid and i am getting awful performance in smoke when trying to do anything with the clips/sequences, which i expected...
View 3 Replies
View Related
Apr 4, 2013
Made a change in a document that involded a Linear Fill... now everytime I open this file the message is repeated until I force quit AI_CS6.
iMac 10.8.3 1, 2.9GHz i5, 8 GB Ram
View 2 Replies
View Related
Jan 10, 2014
How could I share development progress with multiple devices? I would like to share the library on the desktop and notebook. According to faq it's not possible to put library on a network ( I have a nas), but this would be the best solution!
View 4 Replies
View Related
Mar 12, 2014
How do I re-install AI CC after it's been uninstalled because the initial install was corrupt? AI isn't availbale for download again in the app section of CC.
View 1 Replies
View Related
