I''m trying to set my brush up so that it will Mark on one point of the brush.I want my brush so that it will only draw within the area within the circle, Is there a way for me to set that up in photoshop.
View 3 RepliesI am not very good with photoshop, and if there was a brush tool setting to make it just like an actual paint brush.
View 1 Replies View RelatedThere are a few things I just don't get about brush settings. Sometimes it seems my brushes go all wonky.
When I change the settings for 1 brush... say I add some jitter to a smooth brush - then suddenly the other brushes get the same jitter applied to them.
How can I set the brushes so that each brush has a different setting that doesn't change when I change any other brush settings?
p.s. I also don't get why Adobe has you lock a brush by UNlocking it? Seems to me it should be the other way around?
I am reading some drawing tutorials for Photoshop and they talk about a setting of the brush called "flow". Is there a corresponding setting in GIMP and where it is?
Edit: After some additional searching I found that the option is called "incremental", but I also found that it doesn't work as described in the docs - it is not limited to the opacity set for the tool.
I am using GIMP 2.6.11 on Gentoo Linux
I have Photoshop CS2 and Macromedia Fireworks 8 but am more comfortable with Fireworks, so I'd prefer to do this in that program. What I want to do is make part of an image a hotspot and set it so when the user rolls over that hotspot, another little image pops up in it's place, possibly with a link. Is this possible with either programs?
View 2 Replies View RelatedHow can I set the standard brush in GIMP? If I start GIMP, it chooses a fat brush at first and i have to change it always to a thin brush. How can I tell GIMP, that it uses the thin brush at the beginning?
View 2 Replies View Relatedis there anyway to keep the pen and brush setting remember as per layer , let say i have 2 layers of different stroke setting , after i draw 1 to another , it always revert to 1pt stroke width automatically .
i want to keep all the setting : transparency , color , stroke width to be remembered in layer . Therefore, i dont need to change again or remember whenever i draw in between layers.
I'm having a problem changing brush settings back to basic, having pencil tool selected. Still I can draw basic line after I've clicked basic, but the line selection doesn't show. That occured after I chose the brush to be "Charcoal pencil". I still can change the brush to be anything else from the library (like different kind of calligraphics, inked, decorative brushed, even image brushed) but not back to basic. The width-settings are to uniform.
View 2 Replies View RelatedI don't use the Color Sampler Tool much, but In checking something for another thread, I noticed the cursor now seems inconsistent with the cursors of the other tools.Basically, I expected it to drop the sampler on the little crosshair, and it dropped it instead at the end of the dropper.
This used to make sense, and it's still consistent with the Eyedropper cursor (and with prior versions of Photoshop). But I find that now I've gotten used to the other new cursors, most of which now define the hot spot at the upper-left, it didn't do what was expected.
I am trying to set the hot spot for a PNG cursor in a CS6 plugin (Windows) I have searched for a solution but I can't find one. So far I am able to set the cursor using sAIUser->SetCursor() but I don't know how to set its hot spot. Any example of how to set the hot spot of a PNG cursor?
View 2 Replies View RelatedHow I can set GIMP to allow for larger brush sizes?... or create larger brush sizes.
View 7 Replies View RelatedIs there any good technique that I can use to remove the flash hotspot reflecting on oily skin or hair?
View 2 Replies View RelatedI have a jpg image that has text on it. I want to create links in three text area that are website URL'S can this be done. I have read a few posts here but not able to locate the image MAP tab...maybe that is in another version.
View 4 Replies View RelatedBest practices for setting up systems in a lab environment. We have a lab enviroment of about 200 systems that access AutoCad, Inventor, Mechanical and others.
We need to have a customized interface come up when Autocad is opened by students.I have read that you can do this with profiles and workspaces and also with loading a acad.lsp file.
In the past we have just copied the Windows admin profile used to customize AutoCad to the default profile. In AutoCad 2013 that does not seem to grab everything. It doesn't seem to be the best way to do what we need.
We will also be moving to Windows 7 soon which will also cause an issue.I want to find the best way to do this with out having to deal with the Windows profile.
The brush size on my paint brush and clone stamp are not working properly.
View 1 Replies View Relatedyou can see what i mean in the following picture examples.
Selecting a brush (any 1 pixel) brush
[URL]........
shows my selection . Drawing a straight line
[URL]........
Zooming in to the line (600%) you can see i can draw a marquee through half of it ...
[URL].........
No matter what 1 single pixel brush i use this will happen... no matter which computer i use cs6 on and different copies of the installation. Anyway have any insight into this? frankly... it's somewhat limiting that i can't use the brush for stroking a shape if i need a pixel line and yet soft curves that a pencil won't get you.
When i pick my brush tool and try to get a soft brush from the drop down menu they all look white, i don't see a soft brush from a non soft brush.
View 2 Replies View RelatedThe brush preview size does not match brush stroke. I've insert a pic of the problem. I tried allmost everythning, but nothing works.
I use a wacom tablet.
I'm a web developer but have little knowledge of Photoshop. I got a web design job to create something very similar to URL.... Firstly i want to know how to make a brush mild like the white brush on that website. It doesn't overshadow the blue background.
View 1 Replies View RelatedI have contacted Adobe about issues with Photoshop brushes recently. My issue is that the brush size is smaller than the circle that represents the brush. In other words, when I hoover over the area that I want to paint or erase with the circle and then click, the painted or erased area is smaller that the circle. It's really frustrating when fine tuning an image, you never know how close you are to what you want to correct. This is only visible when you zoom in quit a bit. I worked with an Adobe tech for over an hour and he could not simulate the problem. Then he finally asked if I was using a retina display, (he was not).
View 4 Replies View Relatedthe brush, stamp brush and eraser tools are giving me a hard time the actual working area from the tool is so much smaller than the outside frame of it URL....
i'm using cs6.the picture i'm working with was enlarged to 400%.the brush, stamp brush tool was at size: 12px, hardness 100%.opacity 100%
in the presettings i saw the brush was set to normal size.also i played with the jitter sizes, to no avail.
When I use the Adjustment Brush in Camera Raw it frequently just gives me a pin instead of a brush. How can I fix this? I'm on a Mac in Snow Leopard.
View 4 Replies View RelatedI tried defining a new brush but the sample doesn't recognize color and texture. Is there a way of sampling a small piece of a drawing and making a brush out of it? With the multi colors of the sample?
View 3 Replies View RelatedWhen I use the healing brush is tends to "skip". It leaves a line of circles like a stamp would instead of a flowing line like it should leave. No matter how slow I move the brush it leaves a circle and then as I continue to draw nothing happens until I reach the edge of the first circle, it then drops another circle and it continues that way as long as I draw with it. The brush tool works fine, leaves a smooth line. The Spot Healing and Patch Tool work fine but the healing brush will not heal in a smooth stroke. It skips along a leaves a tail of circles the size of the brush. I am using a fast computer, i7 processor, 16bg ram and a SSD drive so I do not think speed is an issue. I upgraded from CS4 where the healing brush worked fine on this computer
View 3 Replies View RelatedHi, I'm having some issues with my brush. It won't brush any other color, I select different colors on "set foreground" and "set background" colors and no matter what I select it brushes white. Does anyone know why?
View 2 Replies View Relatedthe size of the brush at the Brush Mask Tool can not be changed when I pressing the Shiftbutton
X6.4 - Win7
Is there any way to add a favorite brush stroke to the list of brush strokes, or do you always have to open the original file to access the brush stroke?
View 9 Replies View RelatedI'm using a tablet with gimp and I want to be able to set the brush size for the paint brush and also for the eraser, separately. What happens now is that I'll set the paintbrush size to 10px, paint for a little while, turn the pen over to erase and the eraser will now be at 10px. So I'll adjust the eraser size to something like 50px, erase, turn over, and now the paintbrush is at 50px. Grrrrrrr... I tried creating new brushes for both the paintbrush and the eraser, but there's no brush size option. This is my first time using gimp so I'm probably missing something.
View 4 Replies View RelatedI'm having a problem with the Blob Brush tool where I can't change the basic brush to something else. Whenever I pick a brush I want and I try draw with the Blob Brush tool, the brush I picked reverts back to the basic brush. Here are screenshots:
I pick a brush that I like first
But when I start drawing with the Blob Brush tool, it reverts back to the basic brush automatically
Am I doing something wrong or is the Blob Brush tool only capable of using the basic brush?
When I use the Adjustment brush it turns the brush line red.... even is I change the exposure, tint, saturation, color...etc
I cant seem to undone it... even if i restart program
I recently upgraded my computer to Windows 7 (32 bit) and installed CS5 on it. Everything seems to be fine, but using my wacom intuos 3 tablet i found that when making curved brush strokes every so often it came out as a straight line, the straight line being where i start and finish the curve (see pic below. The S stroke is what should happen. The straight line is what happens every so often with the same motion).
At first i thought it was the tablet and reinstalled the drivers to no effect. Since then i've discovered that the same thing occurs with the mouse. The problem occurs once every five or so strokes (i'm doing digital art, so there's a lot of strokes). It never happens if i do a stroke slowly, but will almost always happen if i do a fast stroke.
Testing other painting programs i've found them all to be fine (i grabbed trials of open Canvas, Sai and Gimp and had no such issues). However, getting out my old copy of CS2, i found it had the same problem. The problem does appear to be Photoshop + my computer based. I've since reinstalled them both but had no success there either. (My computer is a intel i3 btw with 8gb of ram, so i wouldn't believe it to be a performance issue)