Photoshop :: CS6 Color Sampler Cursor Hotspot Inconsistent With Rest?
Jul 9, 2012
I don't use the Color Sampler Tool much, but In checking something for another thread, I noticed the cursor now seems inconsistent with the cursors of the other tools.Basically, I expected it to drop the sampler on the little crosshair, and it dropped it instead at the end of the dropper.
This used to make sense, and it's still consistent with the Eyedropper cursor (and with prior versions of Photoshop). But I find that now I've gotten used to the other new cursors, most of which now define the hot spot at the upper-left, it didn't do what was expected.
View 8 Replies
ADVERTISEMENT
Feb 6, 2014
I am trying to set the hot spot for a PNG cursor in a CS6 plugin (Windows) I have searched for a solution but I can't find one. So far I am able to set the cursor using sAIUser->SetCursor() but I don't know how to set its hot spot. Any example of how to set the hot spot of a PNG cursor?
View 2 Replies
View Related
Jun 12, 2009
In Photoshop CS4 I have placed a color sampler/eye dropper crosshair on my RGB image. This shows what the color values are for that section of the image in the info palette. When I adjust curves on a layer, it changes the values of the color sampler to the values of the layer I am adjusting alone, thus preventing me from matching a color using curves and the color sampler. I have been through the preferences and opened every fly-out I could find on the info palette, and the curves dialog box, but have not found a selection that says "Sample all layers" anywhere. I am simply trying to show the values under the color sampler for all layers, similar to the functionality that existed in previous versions of photoshop.
View 4 Replies
View Related
Mar 31, 2009
I used to take the color sampler and put a sample on my image. Then I created a curves layer. AND, by holding some combination of shift/ctrl/alt and clicking the color sample, the values would transfer to the red,green, and blue layers of my curves layer. From there I could make adjustments...
In CS4 I'm trying to do this, and I can't get it to work... It isn't the same as using the eyedroppers on the curve OR the hand above the eyedroppers. It actually copied the color sample values onto the individual color channels.....
How do I do this in CS4?
View 11 Replies
View Related
Jul 22, 2013
If I place a point on an image and then make 10 adjustments is there a way to view how the color sample will change with each adjustment?
Right now I have to go back to the individual 'bg' layer I will call it to view the new color info after the adjustments have been made. I would like to see how the color info is changing for the layer the adjustment is being made to WHILE making the adjustments.
View 9 Replies
View Related
Jul 9, 2012
Is it possible to make the color sampler tool show hsv values in the info panel instead of rgb?
View 10 Replies
View Related
Oct 21, 2005
I have PS 7.0, and an optimized-for-graphics monitor that's less than a year old.
I've noticed that when creating a graphic, the color I use during development changes to a darker shade when I go to save it. And the darker shade is saved rather than the original shade that I intended.
For instance, I created an image using #222222 for background, which is a very dark gray. And when it comes up in the 'Save for web...' dialog, it's much darker, almost #000000.
Is there a setting somewhere that will fix this?
View 1 Replies
View Related
Apr 25, 2013
I am having a problem where Photoshop does not always give me accurate color display all the time. I am aware of the situation but this has become an issue where I have to edit some photos for a pro lab output. The monitor has been calibrated and delta E is less than 0.5, which is okay.
Attached is the print screen of PS at one moment, vs the print screen of PS at another moment (they were layered and mask applied). Dragging the image U/D/L/R also shows the colour one or another. This becomes quite an issue since I had no way of telling whether I am seeing the correct color, especially when I am soft proofing or converting color profiles for final output.
View 4 Replies
View Related
Oct 6, 2008
I'm adjusting RGB images in CMYK preview mode using custom ICC profiles. In taking a color sample measurement using Color Sampler tool and Info Window, I can have the sample data display in RGB, CMYK or whatever.
Is there a way to get each sample to display both RGB and CMYK numbers side by side?? This would be very helpful when 'correcting by the numbers'.
View 2 Replies
View Related
May 11, 2013
Can't print the illustration. The Color Management settings are inconsistent.
I keep getting this message everytime I try to use any of the print script examples in the adobe javascript reference guide. I also tried the script from this thread: [URL] .... and got the same error. I'm using a windows 8 machine but got the error on vista as well.
View 1 Replies
View Related
Mar 22, 2014
How do I selct a portion of a picture and leve it in color and the rest in black and white?
View 2 Replies
View Related
Jun 15, 2013
I am new to GIMP. I have a pdf with a neat picture and want to eliminate some text, essentially painting over it in the same color of the rest of the red background. Then I want to turn it into a powerpoint template with the first page the full picture but my own text and subsequent pages just a sliver of the picture at the side, with the normal ppt format and capabilities. I have attached the image.
View 1 Replies
View Related
Sep 8, 2011
I'm not sure if you can do this but if any of you have seen the Itunes Color Effects app, I'm wondering if there is a way to keep color in one part of a photo while making the rest B&W? I know how to make it B&W & I can't get it to work with the paint bucket or anything like that.
View 2 Replies
View Related
Sep 28, 2012
I''m trying to set my brush up so that it will Mark on one point of the brush.I want my brush so that it will only draw within the area within the circle, Is there a way for me to set that up in photoshop.
View 3 Replies
View Related
Nov 17, 2005
I have Photoshop CS2 and Macromedia Fireworks 8 but am more comfortable with Fireworks, so I'd prefer to do this in that program. What I want to do is make part of an image a hotspot and set it so when the user rolls over that hotspot, another little image pops up in it's place, possibly with a link. Is this possible with either programs?
View 2 Replies
View Related
Apr 7, 2008
Most of my photoshop work involves adding or modifying mottled grey backgrounds or cutting around people photographed against a grey background using the stamp tool.
With the background grey and the cursor color grey, it's incredibly hard sometimes to find the cursor let alone see what I'm doing. I'd like to change the cursor color to something else, but I'm mystified as to how it can be done.
making this change in either CS1 or CS3 running under Windows xP sp2 or Vista?
View 5 Replies
View Related
Aug 25, 2004
Is there some way of changing the color of the cursor in Photoshop
View 2 Replies
View Related
Dec 2, 2013
Is there any good technique that I can use to remove the flash hotspot reflecting on oily skin or hair?
View 2 Replies
View Related
Aug 31, 2005
can anyone tell the advantage of using the colour sampler in conjunction with the curves adjustment when correcting colour casts in a photograph?
I have a photograph with a slightly blue cast on it and ive corrected it by opening the curves pallete and ctrl clicking the image to place dots on the curves and adjusted the curve accordingly.
I have read that it is a good idea to place 4 color sampler points on the image and use them somehow in conjunction with the curves. But how? Has it got something to do with eyeballling the color sampler readouts in the info pallette. I cant work out what the advantage of doing it would be.
View 4 Replies
View Related
Sep 18, 2013
I have a jpg image that has text on it. I want to create links in three text area that are website URL'S can this be done. I have read a few posts here but not able to locate the image MAP tab...maybe that is in another version.
View 4 Replies
View Related
Apr 25, 2012
sometimes (there is no rule) when i'm opening a Color Picker window and moving cursor on the palette - my internet browser opens Adobe site.When i try to get back to PS it immediately starts another tab, and another it takes less than 1 second..
View 4 Replies
View Related
Oct 12, 2012
Can eyedrop sampler be set to use 0 - 255 scale instead of percentage?
View 6 Replies
View Related
Jan 11, 2006
I really would like to change the color of my cursor but can't find an option to do this. Is there any possible way to change it?
View 5 Replies
View Related
Oct 30, 2012
My cursor has decided to display in an impossibly light blue. I want my black cursor back. What do I do?
View 4 Replies
View Related
Jan 11, 2012
It would be nice to have a colour sampler in Lightroom 4 to be able to monitor the use of the new RGB channels in the curve. Is there such an item, or is it possible to have something like that in the toolbox? Something like the Camera raw where you can select mulitple points - or use a modify key to change the eye dropper(Lightroom) into a colour sampler point?
View 1 Replies
View Related
Jul 12, 2008
The input tonal value is 70% of a CMYK primitive color, e.g. cyan, using Photoshop's color picker.
For measuring the tonal values and differences, switch the info palette to CMYK and 32-bit mode. It's also possible to see the differences in HSB and Lab mode (depends on selected CYMK color profile).
Measured values of filled layers using different Photoshop functions: .....
View 5 Replies
View Related
Sep 26, 2012
I have both Corel 12 and X5. A few years ago a friend of mine installed a custom color palette in my C12 that was matched to the Federal Standard 595 color system.
When I move the cursor over each color in the palette, it displays the FS number assigned to each color (ie. FS35237, FS37038, etc.)
I recently installed the same color palette into X5. However, when I move the cursor over each color, it displays the RGB color ratios for each color. If I open the palette and click on the 'display names' option, it shows the FS number for each color but reverts back to the RGB ratio when the palette is minimized to the right of my screen (I hope that makes sense).
How can I get the FS numbers to display when I move the cursor over the colors?
View 1 Replies
View Related
Aug 20, 2012
In Autocad 2012 the white cursor automatically toggles to black when moved onto the white background of paperspace. This does not occur in 2013. Imported the sysvaribles from 2012 into 2013. Cursor still does not toggle.
View 5 Replies
View Related
Mar 5, 2013
Is there a way to change the cursor color in the command line in AutoCAD 2013?
When I change the background (active command) to black, the cursor blends into it and not visible. Can’t see where is my current position when editing coordinates. The command background was black and text white for the last 10 years for 20 drafters; we would like to keep it this way
View 8 Replies
View Related
Mar 29, 2012
Is there a way to get a white cursor to automatically change to black when hovering over white images or hatches that doesn't involve turning off hardware acceleration?
System specifications: AutoCAD 2014 64-bit SP1, Windows 7 64-bit SP1, Intel Core i7-2600K, AMD FirePro V4900
16GB RAM, Crucial M4 SSD, 3 Dell Monitors (2 30" 2560x1600 & 1 20" 1200x1600)
View 4 Replies
View Related
May 6, 2013
Using photoshop CS6 on Mac, I am seeing a problem with one of my batch processing sript who's only task is to apply an embossed water mark to images which I have resized such that the longest side is always 500px. (short side varies depending on how I have cropped).
In most cases, the piece of text I am adding to the image appears fine. But then for no apparent reason, it will suddenly apply the text (which I have set to 24pt) and it is way to big. To address the issue, I have to reduce the font size (via the actions pallate) down as far as 8 pt. Then it starts to appear more or less correctly (for a while) until maybe a few weeks later when I open up photoshop to run the job again and suddenly 8 pt font is WAY too small and I have to bump it up to 24 pt again.
View 11 Replies
View Related