Photoshop :: Set Navigator Zoom Percentage
Apr 24, 2013
Any way to set a default zoom percentage value in the Photoshop CS6 Navigator panel?I normally zoom in and out using the CMD and + - keys, which give 12.5%, 16.67%, 25%, 33.33%, etc.I would like to set the value at the bottom left of the Navigator panel to 31.5%, then click and somewhere and save this as one of the default settings, so that it would replace,33.33% or come between that and 25%
A bit of a strange value I know, but I've found that this value gives me an image on the screen that is the same size as what I get out of the printer.bind having to type in 31.5 over and over again in the Navigator.
View 6 Replies
ADVERTISEMENT
Mar 19, 2013
Any way to set a default zoom percentage value in Photoshop CS6?
I would like to set this to 31.5%.
A bit of a strange value I know, but I've found that this value gives me an image on the screen that is the same size as what I get out of the printer.
It would be great if I could do this, as it's a bit of a bind having to type in 31.5 over and over again in the Navigator.
View 7 Replies
View Related
Jul 18, 2013
I have a windows 7 based machine with 24gb of ram and a 560to geforce video card and 980x CPU. have just reinstalled Photoshop cs5 and newest update, Photoshop now opens images at a viewing percent that is a lot smaller than the previous installation, currently a vertical image is 16.7% and a horizontal 25%, these should be 25% and 33.3% to almost fill the screen. what can I do to get images to open at a bigger zoom percentage?
View 2 Replies
View Related
Jul 25, 2013
sometimes when trying to manually input the percent number for either layer opacity or image zoom, when I try to type a number I just get a DING sound and it wont allow me to do anything. It goes away after I click a bunch of random things, minimize photoshop and then open it up again. Why does it do this? All I do is click on the percent number, try to input a new number but it sometimes just doesn't allow me to do so. I check all around the document to see if there is anything going on that may interfere but I notice nothing. What is it trying to tell me when it just dings and refuses to change the numbers?
View 2 Replies
View Related
Jan 29, 2014
I would like to lock the size of an object regardless of the zoom percentage. When I am zooming in on a vector map (main layer) the objects (on different layers) becomes very big. So I should be able to zoom in/out on the vector map, but the objects shall keep the same size. How can I do this?
View 5 Replies
View Related
Nov 15, 2013
I'd like it, if an image is re-sized to the same percentage as the current zoom level, afterward the zoom is automatically switched to 100%
Typically, if I have an image too big for it's intended use, I'd adjust the zoom until I get it to appear the right size, then resize it to the zoom level. (I imagine many people do the same thing). However, after resizing, the view of the image is really tiny, since the old zoom level is now being applied to the smaller image.
View 1 Replies
View Related
Feb 15, 2006
I use Photoshop CS2 to create Designs for webpages. These designs have pixel-exact elements, e.g. a 1-pixel-line from top to bottom.
Now when I zoom in (>100, then I have sort of anti-alias, so that the 1-pixel-line isn't only one blue anymore, but it has different blue tones. I guess for photo manipulations etc. this anti-aliasing zoom is great, but for webdesign it sucks because I don't know if only the zoom make the line "corrupt" or if it really is corrupt.
Is there a way to change this zoom?
View 3 Replies
View Related
Feb 21, 2008
recently my zoom tool changed from default zoom in + to zoom out -
View 1 Replies
View Related
Jul 30, 2013
How do I get a percentage value in Curves-in CS5 it used to be command-click would make a dot on a point on the curve, to allow for accurate adjustment...
View 8 Replies
View Related
Jan 18, 2007
This is something that i never really gave much thought - but what value do the opacity parentages really have?
See my assumption was that 50% + 50% = 100%. So if you had a solid black layer set to 50% opacity and you duplicated that layer one would think that it would be solid black again... but no is only 75% black. WHAT?
The other thing is that solid black with and opacity level of 50% over solid white is a true 50% gray which is half black and half white - do to half's not make a whole?
View 2 Replies
View Related
Apr 9, 2003
Who has experience with the "select"-tool?
In a picture I'd like to get the ratio of the selected and the unselected areas. That means: I select several parts of my picture (for example by using the magic wand tool) and would now like to know the portion of the selected areas (area of the selected parts, percentage, ....whatever) compared to the unselected ones.
View 1 Replies
View Related
May 22, 2009
While working on any project in Photoshop CS4, and frequently while switching between images, the main image workspace (on the left) goes dark, while the "Navigator" stays the correct, brighter color. Has anyone else seen this? Does anyone know of a way to fix it? The only way I have been able to reset this is by closing and opening Photoshop. But, it gets quite annoying working over several hours and having to close all of the files and reopen them multiple times. I do have OpenGL enabled. I have attached a screenshot of an example. Notice the brightness of the image on the left vs in the navigator.
View 1 Replies
View Related
Aug 15, 2007
In one of the Photoshop view mode (if you press F)..you can scroll beyond the border of the image. I love this feature, but I cant do this in the normal view.. is there any way to enable this?
Not sure if I exlpained it clearly.this option enables you to slide the red square (in the nav box)..outside of the viewer.. normally it stops when it hits the border..
View 1 Replies
View Related
Apr 20, 2013
I am trying to create "degraded" stimuli for an experiment - specifically, I'd like to remove a consistent percentage (70%) of pixels from an image and replace them with solid black. It is important that the pixels are removed in a random fashion - that is, if I modify a series of images in this way, I don't want the black areas to always appear in the same portions of the images.
View 3 Replies
View Related
Aug 25, 2011
I'm trying to define my own watermark (just a piece of text) and define it as an action so that I can apply it as batch.
I'm creating a text layer as the signature, and I would like to move this text layer to the lower right corner of every image. For this, I'm trying to find a move by percentage command that will work for any image size. i.e. the signature must appear at 90% of the width and %92 of the height, regardless if the image is 2592x1728 or 1728x2592 pixels.
How to do a 'move by percentage' or alternative ways to achieve this?
View 4 Replies
View Related
Oct 8, 2013
Just got CS6 and I cannot find the little percentage figure that used to sit at the bottom left corner to give an indication of the image size you are viewing and allow you to alter it. I'm sure it must be in there somewhere but I can't find it - and believe me I've looked.
View 6 Replies
View Related
Dec 16, 2003
I'm looking for a way to resize a large number of images, but not to a specific size. Because of the vertical and horizontal orientation of my various photos, I want to be able to decrease the size of photos I won't be printing by a given percentage.
View 2 Replies
View Related
Nov 4, 2012
I like navigator and I like full screen with menu bar. Thing is, by palettes block the image on both sides. Anything that can be done?.
View 66 Replies
View Related
Oct 20, 2013
I just upgraded to CC from CS4. In CS4, when recording an action I could set the rulers to percent and a percentage-based value would be recorded rather than a pixel value. For example, if I recorded the creation of a vector shape that filled the entire canvas, the step in the action would create a 100% by 100% shape, starting at point 0%, 0%. This allowed me to run a batch on varying canvas sizes, and get a shape that filled the canvas no matter the size. In CC, it always records pixel-based values no matter what the rulers are set to.
View 1 Replies
View Related
Feb 22, 2012
The AutoCAD doesn’t show the “intersect osnap” at certain zoom!
The “intersection osnap” between a “hatched rectangle” and a “DASHDOT2” line appears and disappears depending on the amount of zoom!
As I zoom out the “intersection osnap” appears but when I zoom in, it disappears
Why the "intersection Osnap" should disappear as I zoom in?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 2 Replies
View Related
Feb 27, 2013
I am working on getting some settings done, moving from 2008 to 2012. How do you set the Middle Mouse Button (wheel) to either Zoom All or Zoom Extents when you double click it? I thought it was set in the Main CUI file.
View 9 Replies
View Related
Jan 8, 2013
My keyboard has a zoom key with + and - selections. I use to use this key in drawings to zoom in and out when in the AutoCAD application when we had Windows XP. Now that I have Windows 7 I can't do this. I can't find out how to assign this key on the Microsoft Keyboard interactive software either. I have the other keys assigned as desired.
Can I still use my keyboard zoom key to zoom in and out in drawings? If so, how do I set this up in AutoCAD, or do I need to do this through a Microsoft keyboard application?
View 6 Replies
View Related
Apr 5, 2013
I am having problems with zoom, pan and rotate at high zoom level. The movements becoming jerky and delayed. But for whatever reason the problem exists in some assembly files and not in the others.
View 9 Replies
View Related
Sep 5, 2013
My colors and value are a lot darker and saturated in my navigator window.
View 1 Replies
View Related
Feb 13, 2013
I just got PSE 9 because I hate PSE 10 and 11. I'm used to being able to move the Navigator Panel wherever I want, but in PSE 9 it seems to be locked in the panel area and I don't see how to move it elsewhere. How do I move the Navigator Panel?
View 2 Replies
View Related
Oct 25, 2012
Never had this issue in previous versions of Photoshop. Just upgraded to CS6 and played with a few of the Preferences.
For some reason, all files open at the smallest percentage possible (as small as <1%). How to set a default open size, or if I managed to check a box that made this happen? It's really annoying to zoom in on every document that I open.
View 2 Replies
View Related
Feb 1, 2006
I am batch scanning 35mm slides 15 at a time using an Epson 1680. I have been playing with the various dpi's and scale to find the best settings so I can cut the slides and paste them into Powerpoint for a lecture. What I have been finding is that when I cut the slide from the scanned image (of 15 in the holder) and place it in my powerpoint slide and then enlarge it, it is too blurry.
I have tried enlarging the dpi to 2400 but the computer won't scan it. I seem to get OK images in powerpoint at 90dpi and 800% scale but I really want them sharper.
How can I do this? Is it best to scan the slides individually and not use the holder?
More importantly, although the slides look OK on my laptop how will they look when they are projected onto the big screen. I do't want them to be too blurry.
View 1 Replies
View Related
May 2, 2013
Say I have an image that is 100x100 pixels. And I want to take one of the layers and resize it to 50% of the image size, so that it is 50 pixels. How can I accomplish that?
The reason I ask, is that have multiple images all with different size. But I have a signature (ie. watermark) that is always the same size. I want to be able to place this signature, and then resize it to XX% of the image it was placed on. That way, it should always have the same proportions.
View 9 Replies
View Related
Apr 11, 2012
I am trying to create an action that will work with some product images. Every image document I make is the same size (1000 x 1000px). The layer that I paste onto that document will always vary in size. I like my product images to all have the exact same margin. So I always use the transform command to specify that the width of any layer should be exactly 930px. This gives me exactly the same margin on my 1000 x 1000px document every time, regardless of the original layer size. I want to create an action for this to speed up the process but when I press record I hit a stumbling block.
In reality, I choose transform and set width to 930px.
Photoshop records me choosing transform then setting the width to 97% (or whatever).Percentages are useless to me as my original layers vary radically in size. I need to transform by pixels.why photoshop is recording my transform by percentage and not the pixels that I actually use?
View 10 Replies
View Related
Oct 14, 2012
It is relatively easy to extract a swatch-table from a picture, but is there a way in Photoshop or Illustrator to display the relative percentages of the colors in a picture (for example: 70% black, 24% white, 2% yellow, 4% blue, etc.)? So I don't mean the RGB-percentages but the amount of a certain colortone in the picture. The swatch only shows the colortones, not their quantitative percentage in the picture.
View 3 Replies
View Related
Nov 17, 2006
i have to change it t pixel everytime i start up photoshop.
View 6 Replies
View Related
