I am trying to make a custom texture for Half-Life 2. The image has to be a power of two, how do I resize it in PS to a power of 2? The image is 2558x1886. Is it possible? I tried resizing it just by typing 1024 in the box but it automatically changed the other value to correspond with my changes. How do I do this? I want it to be 1024x1024.
View 2 Replies
I've just had my first 3D experience in Photoshop mapping a bunch of different label options onto a cylinder - everything was working perfectly until I re-sized the image.
Now each label change-out gets displayed as one of the labels - Photoshop will only display one label despite there being mutiple layers and layer comps.
If I:Go to the diffuse texture for each label and choose "Edit texture"A new window opens showing the correct label/texture.
How does one create a texture similar to this?
View 2 Replies View RelatedFor my 3D scene, I have to use a texture file on the floor. If I use the only file, than it looks really boring and below par. What I want is, I want to generate some (around 6-8) texture files within the original texture file - so the colors of all the texture files remain same but only the texture varies.Likewise there are more than 500 texture files and I just can't do them manually. Is there any way out to do this in Photoshop?
View 3 Replies View RelatedI need to be able to re-size images that are large than 1MB in order to put them on our MLS site.
My previous computer had 2 arrow icons on the desktop.
One was for re-sizing horizontal pics and the other for re-sizing vertical pics.
I could simply drag/drop the image file onto these re-sizing icons and they would be re-sized.
The smaller file size thumbnail would appear on the desktop.
How can I get these re-sizing tools on my new computer's desktop?
I am using CS6.
I just updated my old Power PC G5 to Leopard 10.5.8 - which Photoshop Softwares can I use on it - I tried a CS3 Extended but it would not install - CS$, CS5?
View 4 Replies View RelatedComputers today are including more and more cores. I am looking to upgrade my machine and I have looked at an AMD quad core processor and their new FX 8 core processor. The computers I have looked at are are the same expect the processor (Quad vs 8 core). From my understanding the more cores doesn't mean more speed unless the software can actually use the power. So can Photoshop (CS6) actually use and benefit by having 8 cores than 4?(For that matter can other Creative Suite products also use that much power?)
View 5 Replies View RelatedSeems like a good time for some KPT. That is, the original Kai's Power Tips. Many kudos to Steve and Gurus Network.
Many moons ago, Kai took a few Photoshop tools to the next level. To this day, even as old as they are, a great deal of his work is still relevant.
I have 2 computers. Let's say I have a LAN and i'm sitting and working with photoshop on my maincomputer, is there a plugin wich lets me grab some CPU power from my other computer?
I have 100mhz on each computer, when I start a filter rendering my other computer help the maincomputer with the rendering so I get 200 mhz total.
I have 2 computers. Let's say I have a LAN and i'm sitting and working with photoshop on my maincomputer, is there a plugin wich lets me grab some CPU power from my other computer?
So just for an example, say I have 100mhz on each computer, when I start a filter rendering my other computer help the maincomputer with the rendering so I get 200 mhz total.
I have a lava texture and a ground texture. I'd like to be able to make some cracks on the ground texture that would show through the lava texture below it. Something like a cracked mud look. I would be using this for a game I'm making form some terrain textures. Are there any plugins that would aid in making these transparent cracks and perhaps even add depth to the cracks?
I guess a spider web where the spider was on crack would be something I'm looking for. Similar to the following image:
Lava Ground
I know there is a terrific new feature in PS CC (I have used it before!) but I just can't find any explanation on how to to do it!
The question is how do you remove, from an image, a power line, or a telephone line by simply clicking on both ends of those lines in order to remove them?
heard about the "kai power tool plugins"
can i download these plugins somewhere?
I have a performance monitor for my graphics card, and it told me that the card used to run at 270MHz for 2D applications under XP.
Now I have loaded Vista, the card is running flat out at 3D performance levels of 666Mhz, all the time. This is despite the fact that I have disabled all the Vista mega graphics.
I manually underclocked the card to 335Mhz, and there is no difference in Vista performance. Especially, there is no difference with Photoshop.
But of course, running at the lower f, the GPU will be consuming less power and have alonger life, etc.
I mean the running temperature dropped a fair old bit!
why Vista is running the card in 3D mode all the time?
possible to get it to stop?
how would I remove power lines in my image.
View 6 Replies View RelatedI have some text titles that I have created with a transparent background and saved as JPEGs. When I insert them in my power point presentation, they have a white background which I don't want. How can I insert text without getting a background.
View 3 Replies View RelatedJust recently I tried to open my Photoshop CS2 and received a message saying cannot open no longer supported by PowerPC. What does this mean? Is this version officially defunct? If so what can I do so I won't have to buy Creative Suite again.
View 2 Replies View RelatedI've just had a power cut and lost 1+ hour of work in photoshop, two cd covers.
is there any way that i can get it back?
I use photoshop CS5 on windows 7.
Been working on a file with a few layers, then the power goes out so my computer "crashes". When I reboot my computer, I am unable to open the file I was working on earlier and instead, get the message "Could not complete your request because it is not a valid Photoshop document." The file is still .psd and I don't have a preview for the file anymore:
Is there anyway to recover the file?
I've been designing for 3 days. A very important design but power cut in the apartment. I tried to recover the file. I've failed.
Should I save a picture? I look on the picture and can draw. I using Adobe Photoshop CS5.
There was a major power outage while I was exporting files from Organizer 10. Now when I try to open Organizer, it opens momentarily, and then a a notice pops up that says: "Elements 10 has topped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." Obviously, Windows hasn't found a solution. I can still get into Elements Editor, but I do use Organizer for all of my organizing activities. Is there a way that I can repair PSE/Organizer program files without uninstalling the entire program and then reinstalling? Also if I have to do that, will I have difficulties deactivating and reactivating PSE? I'm using a Windows 7 machine with 12 GB Ram.
View 2 Replies View RelatedI have just installed CS5, and all components work except for Photoshop, which will not open. I am on a new Macbook Air running Mountain Lion 10.8.5 with 1.3 GHz Intel Core i5. The error message reads: "You can't open the application "Adobe Photoshop CS5.1" because PowerPC applications are no longer supported." I have already tried reinstalling and deleting the library file: com.apple.LaunchServices.plist and restarting. What can I do?
View 1 Replies View RelatedI watched a video created by Adobe Product Manager Brian O. Hughes titled Adobe Max: Hidden Gems in Photoshop an excellent video (see link below). I have been trying his easy method of removing power lines from an image using the pen tool and stroke path method defined as follows:
Using the pen tool create a path of the line to be removed. Making sure the brush tool is small and set at 100% opacity; click on the Spot Healing Brush making sure it is set to "content aware". Then in the path panel click "stroke path" and it removes the line.
Well I have followed these instructions several times, very simple, but it doesn't remove the line for me. I can manually shift click the start and ending point and it removes it but using the stroke command within the path panel doesn't work. I am making sure the path is active.
Here is the link to the video, his technique is listed near the end, @ minute 56:
[URL]..........
Within the last 18 months, I've run across an Adobe TV tutorial describing how to eliminate power lines in an image but I'm unable to find the show. method besides just using the cloning tool? Or, know of the tutorial?
View 4 Replies View RelatedMy problem is when I use Corel video studio pro x4 and load a high definition video, in a few minutes it will turn off "power saving mode". What is the problem of my computer?
View 8 Replies View Relatedwhy my After Effect render so lousy???When i finish my rendering,the video play very slow and keep stopping....I've tried for many times,but it's still the same result..
View 2 Replies View RelatedI use Inventor tube and pipe heavily for my job, and work with very large models that incorporate architectural data imported from a Revit file, as well as using Navisworks (both are 2014 version). Since Inventor doesn't support mutiple cores on a muti-core processor (except for when rendering in INventor Studio), would using a NVIDIA quadro and Tesla card combo would give me more processing power. I know there are other programs, (3dsMax, Showcase, FEA, and CFD) that can off load some of the processors number crunching to the Tesla GPU. But I haven't been able to find anything as to whether Inventor or Navisworks cand do that under there "normal" modes.
View 2 Replies View RelatedI think thats what there called but it's starting to get very annoying having these things come up when i try and combine double spreads.
All just post the photo if you don't know what I'm talking about.
[URL] The line in the center is what I'm trying to get rid of.
How can I import a Power Point Presentation into Premier Pro
View 3 Replies View RelatedI am completely baffled by what is happening to my text. I am using a Windows 7, 64 bit computer and CorelDraw X6, and am trying to create a 3" round button graphic. About two weeks ago, I created a photo button and wanted to put white text on top of the button. This worked fine, and I sent the proof to the client.
They wanted to change the text and so I went in to change the text to what they wanted. That's when things went weird... Now, when I retype the text to insert it on the round path, I position it and then when I click off the text, the text is no longer white, but rather it has an orange outline and no fill!
I look at the color boxes and yes, the fill is white with no outline. I am no expert by far, but have been using Corel for many years. I do notice that whenever Windows does their little "updates" my computer gets wonky and they did about two of those updates in the last two weeks.
Today, I did a system restore back to 9/12/12, but it is still happening.
How do I separate colors in the object that is power-clipped?
View 8 Replies View Related
