I have some text titles that I have created with a transparent background and saved as JPEGs. When I insert them in my power point presentation, they have a white background which I don't want. How can I insert text without getting a background.
View 3 RepliesHow can I import a Power Point Presentation into Premier Pro
View 3 Replies View RelatedI am completely baffled by what is happening to my text. I am using a Windows 7, 64 bit computer and CorelDraw X6, and am trying to create a 3" round button graphic. About two weeks ago, I created a photo button and wanted to put white text on top of the button. This worked fine, and I sent the proof to the client.
They wanted to change the text and so I went in to change the text to what they wanted. That's when things went weird... Now, when I retype the text to insert it on the round path, I position it and then when I click off the text, the text is no longer white, but rather it has an orange outline and no fill!
I look at the color boxes and yes, the fill is white with no outline. I am no expert by far, but have been using Corel for many years. I do notice that whenever Windows does their little "updates" my computer gets wonky and they did about two of those updates in the last two weeks.
Today, I did a system restore back to 9/12/12, but it is still happening.
I just updated my old Power PC G5 to Leopard 10.5.8 - which Photoshop Softwares can I use on it - I tried a CS3 Extended but it would not install - CS$, CS5?
View 4 Replies View RelatedComputers today are including more and more cores. I am looking to upgrade my machine and I have looked at an AMD quad core processor and their new FX 8 core processor. The computers I have looked at are are the same expect the processor (Quad vs 8 core). From my understanding the more cores doesn't mean more speed unless the software can actually use the power. So can Photoshop (CS6) actually use and benefit by having 8 cores than 4?(For that matter can other Creative Suite products also use that much power?)
View 5 Replies View RelatedSeems like a good time for some KPT. That is, the original Kai's Power Tips. Many kudos to Steve and Gurus Network.
Many moons ago, Kai took a few Photoshop tools to the next level. To this day, even as old as they are, a great deal of his work is still relevant.
I have 2 computers. Let's say I have a LAN and i'm sitting and working with photoshop on my maincomputer, is there a plugin wich lets me grab some CPU power from my other computer?
I have 100mhz on each computer, when I start a filter rendering my other computer help the maincomputer with the rendering so I get 200 mhz total.
I have 2 computers. Let's say I have a LAN and i'm sitting and working with photoshop on my maincomputer, is there a plugin wich lets me grab some CPU power from my other computer?
So just for an example, say I have 100mhz on each computer, when I start a filter rendering my other computer help the maincomputer with the rendering so I get 200 mhz total.
I need to create a little application (Not the firt one in .NET but my first one for Autocad in C# .NET).
What do I need to do ?
User select texts on screen. => Making a Selection Set of those selected texts. DONE
For each select text is on screen another text (on another layer) with the same coordinates.
For each text in the first Selection Set, I try to create a second SelectionSet (filtered to select text only, named acPSResPCode) but that SelectionSet stay always null. If I make the SelectionSet without filter I select every lines in the crossing windows, but no text are selected.
Here's my code (PS : Code for AcadMp 2010)
[CommandMethod("SelectionPP")] public void SelectionPP() { //Récupère le document courant, sa base de données, et demarre une transaction Document acDoc = Application.DocumentManager.MdiActiveDocument; Database acCurDb = acDoc.Database; //Récupération de l'éditeur de la base de données courante Editor ed = acDoc.Editor; //Démarre une nouvelle transaction using (Transaction acTrans = acCurDb.TransactionManager.StartTransaction()) { //Création
[code].........
I know there is a terrific new feature in PS CC (I have used it before!) but I just can't find any explanation on how to to do it!
The question is how do you remove, from an image, a power line, or a telephone line by simply clicking on both ends of those lines in order to remove them?
heard about the "kai power tool plugins"
can i download these plugins somewhere?
I have a performance monitor for my graphics card, and it told me that the card used to run at 270MHz for 2D applications under XP.
Now I have loaded Vista, the card is running flat out at 3D performance levels of 666Mhz, all the time. This is despite the fact that I have disabled all the Vista mega graphics.
I manually underclocked the card to 335Mhz, and there is no difference in Vista performance. Especially, there is no difference with Photoshop.
But of course, running at the lower f, the GPU will be consuming less power and have alonger life, etc.
I mean the running temperature dropped a fair old bit!
why Vista is running the card in 3D mode all the time?
possible to get it to stop?
how would I remove power lines in my image.
View 6 Replies View RelatedI am trying to make a custom texture for Half-Life 2. The image has to be a power of two, how do I resize it in PS to a power of 2? The image is 2558x1886. Is it possible? I tried resizing it just by typing 1024 in the box but it automatically changed the other value to correspond with my changes. How do I do this? I want it to be 1024x1024.
View 2 Replies View RelatedJust recently I tried to open my Photoshop CS2 and received a message saying cannot open no longer supported by PowerPC. What does this mean? Is this version officially defunct? If so what can I do so I won't have to buy Creative Suite again.
View 2 Replies View RelatedI've just had a power cut and lost 1+ hour of work in photoshop, two cd covers.
is there any way that i can get it back?
I use photoshop CS5 on windows 7.
Been working on a file with a few layers, then the power goes out so my computer "crashes". When I reboot my computer, I am unable to open the file I was working on earlier and instead, get the message "Could not complete your request because it is not a valid Photoshop document." The file is still .psd and I don't have a preview for the file anymore:
Is there anyway to recover the file?
I've been designing for 3 days. A very important design but power cut in the apartment. I tried to recover the file. I've failed.
Should I save a picture? I look on the picture and can draw. I using Adobe Photoshop CS5.
There was a major power outage while I was exporting files from Organizer 10. Now when I try to open Organizer, it opens momentarily, and then a a notice pops up that says: "Elements 10 has topped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." Obviously, Windows hasn't found a solution. I can still get into Elements Editor, but I do use Organizer for all of my organizing activities. Is there a way that I can repair PSE/Organizer program files without uninstalling the entire program and then reinstalling? Also if I have to do that, will I have difficulties deactivating and reactivating PSE? I'm using a Windows 7 machine with 12 GB Ram.
View 2 Replies View RelatedIf i do a text box and put say 16 point text in it, then (as part of a group or folder) scale that text box (say 200%), i get irregular point sizes.
If i use the text tool and select the enlarged copy, the character palette tells me i have 16 point copy still (even though it plainly isnt).
If its a single point size and not larger headings, i can use the move tool and it will tell me the faux size - but thats no work around.
So in short, how do i scale (using the transform tool) copy and it enlarge the actual point size of the copy.
I have just installed CS5, and all components work except for Photoshop, which will not open. I am on a new Macbook Air running Mountain Lion 10.8.5 with 1.3 GHz Intel Core i5. The error message reads: "You can't open the application "Adobe Photoshop CS5.1" because PowerPC applications are no longer supported." I have already tried reinstalling and deleting the library file: com.apple.LaunchServices.plist and restarting. What can I do?
View 1 Replies View RelatedI watched a video created by Adobe Product Manager Brian O. Hughes titled Adobe Max: Hidden Gems in Photoshop an excellent video (see link below). I have been trying his easy method of removing power lines from an image using the pen tool and stroke path method defined as follows:
Using the pen tool create a path of the line to be removed. Making sure the brush tool is small and set at 100% opacity; click on the Spot Healing Brush making sure it is set to "content aware". Then in the path panel click "stroke path" and it removes the line.
Well I have followed these instructions several times, very simple, but it doesn't remove the line for me. I can manually shift click the start and ending point and it removes it but using the stroke command within the path panel doesn't work. I am making sure the path is active.
Here is the link to the video, his technique is listed near the end, @ minute 56:
[URL]..........
I have a project that requires swapping out Text & images on a faked perspective.
I want to use vanishing point but I want the text to remain editable wo I can easily swap it out.
I also have some images I want to use as smart objects so I can swap them out easily as well.
I'm not sure if this is possible. The Cut and paste doesnt seem to work.
I'm able to get Vanishing Point to work up until I place the text into the grid I've created. It then becomes too big for the grid so it looks as if the grid has cropped it.
it's supposed to say OCCUPY on the ground but instead it's getting cropped and you're only seeing part of it. The original type I placed into the grid was not that large. How can I make sure the text stays within the grid at it's original size?
Within the last 18 months, I've run across an Adobe TV tutorial describing how to eliminate power lines in an image but I'm unable to find the show. method besides just using the cloning tool? Or, know of the tutorial?
View 4 Replies View RelatedMy problem is when I use Corel video studio pro x4 and load a high definition video, in a few minutes it will turn off "power saving mode". What is the problem of my computer?
View 8 Replies View Relatedwhy my After Effect render so lousy???When i finish my rendering,the video play very slow and keep stopping....I've tried for many times,but it's still the same result..
View 2 Replies View RelatedI use Inventor tube and pipe heavily for my job, and work with very large models that incorporate architectural data imported from a Revit file, as well as using Navisworks (both are 2014 version). Since Inventor doesn't support mutiple cores on a muti-core processor (except for when rendering in INventor Studio), would using a NVIDIA quadro and Tesla card combo would give me more processing power. I know there are other programs, (3dsMax, Showcase, FEA, and CFD) that can off load some of the processors number crunching to the Tesla GPU. But I haven't been able to find anything as to whether Inventor or Navisworks cand do that under there "normal" modes.
View 2 Replies View RelatedI think thats what there called but it's starting to get very annoying having these things come up when i try and combine double spreads.
All just post the photo if you don't know what I'm talking about.
[URL] The line in the center is what I'm trying to get rid of.
How do I separate colors in the object that is power-clipped?
View 8 Replies View RelatedI have Corel Draw 12 on one computer and Corel 5 on my lap top - After following the simple video instructions to place a background image ( imported photo - jpg or tiff) into a set text the message box ...The object you selected is invalid - do you wish to try again pops up.
View 1 Replies View Related